OWNER’S MANUAL Digital & Analog DVD recorder/VCR player combi Please read this manual carefully before operating your set and retain it for future reference. Depending on the region DVB-T features on this recorder may not be operated. RC689D www.lg.
Getting Started 2 Getting Started Safety Information 1 CAUTION Getting Started RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Getting Started This device is equipped with a portable battery or accumulator. CAUTION: The apparatus shall not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, shall be placed on the apparatus. Notes on Copyrights yy Recording equipment should be used only for lawful copying and you are advised to check carefully what is lawful copying in the area in which you are making a copy.
Table of Contents Table of Contents Getting Started 2 6 6 6 6 6 7 8 8 8 9 10 11 11 Safety Information Introduction – About the “7” Symbol Display – Symbols Used in this Manual – Supplied Accesorries – What is SIMPLINK? – Recordable Discs – Recommended recordable DVD discs – Playable Discs – Regional Code – File compatibility Remote control Front panel Rear panel Connecting 12 12 13 14 14 14 15 16 16 17 17 17 Connecting to Your TV – Antenna connection to your TV and this unit – HDMI Connection – Compo
Table of Contents 5 Troubleshooting 59 59 59 60 60 61 Troubleshooting – General – Resetting the unit – Playback – Recording – HDMI Appendix 62 62 63 64 65 66 68 68 68 Controlling a TV with the Supplied Remote Control – Setting up the remote to control your TV Area Code List Language code List Trademarks and Licenses Specifications Maintenance – Handling the Unit – Notes on Discs 1 2 3 4 5 6
Getting Started Supplied Accesorries - - Introduction + About the “7” Symbol Display Getting Started + 1 “7” may appear on your TV display during operation and indicates that the function explained in this owner’s manual is not available on that specific media. Video cable (1)/ Audio cables (1) Remote control (1) Batterie (1) RF cable (1) Symbols Used in this Manual ,,Note Indicates special notes and operating features.
Getting Started Recordable Discs DVD+R: -- These Discs can be recorded only once. After you finalize a DVD+R, you cannot record on it or edit it any more. DVD-RW: -- Playable on DVD+R compatible players (after finalization). -- These Discs can be recorded on repeatedly. Recordings can be erased, then you can record again on the same Disc. -- Any edited contents are not be compatible on DVD+R compatible players. (Hide, chapter combine, added chapter mark, etc.
Getting Started Recommended recordable DVD discs 1 Getting Started DVD-R Mitsubishi (8x, 16x), Verbatim (8x, 16x) DVD-RW Mitsubishi (8x, 16x), Verbatim (8x, 16x), JVC (4x), Maxell (4x) DVD+R Mitsubishi (8x, 16x), Verbatim (8x, 16x) DVD+R(DL) DVD+RW Mitsubishi (2.4x, 8x) Mitsubishi (8x, 16x), HP (4x), Verbatim (4x), Ricoh (4x) ,,Note If a DVD-RW/DVD+RW discs is recorded using a personal computer or other DVD recorder, you cannot format the disc using this recorder.
Getting Started File compatibility Audio Files Overall Sampling frequency: within 8 - 48 kHz (MP3), within 32 - 48kHz (WMA yy Some wav files are not supported on this player. yy The file name is limited to 180 characters. yy Depending on the size and number of the files, it may take several minutes to read the contents on the media.
Getting Started Remote control • • • • • • a • • • • • • 1 Getting Started 1(POWER): Switches the unit ON or OFF. DVD: Selects the unit’s mode to DVD. VCR: Selects the unit’s mode to VCR. EJECT, OPEN/CLOSE: Opens and closes the disc tray and ejects the tape in the VCR deck. 0-9 numerical buttons: Selects numbered options in a menu. REC (X): Starts recording. Press repeatedly to set the recording time. AV/INPUT: Changes the input to use for recording (Tuner, AV1-2, or DV IN).
Getting Started 11 Front panel 1 Getting Started a 1/I (Power) j VCR/B b Disc Tray k N (PLAY/PAUSE) c DVD/B l Z (STOP) d Display window m X (Recording) e Remote Sensor n PROG. (s/w) f Cassette Compartment (VCR deck) o DUBBING g USB Port p DVD/VCR h DV IN q RES. i AV IN 2 (VIDEO/AUDIO) (Left/Right) Rear panel a ANTENNA IN (FROM ANT.
Connecting Connecting to Your TV Antenna connection to your TV and this unit Make one of the following connections, depending on the capabilities of your existing equipment. Remove the antenna cable plug from your TV set and insert it into the antenna socket at the back of the recorder. Plug one end of the antenna cable into the TV socket on the recorder and the other end into the antenna input socket on your TV set.
Connecting 13 ,,Note HDMI Connection If you have a HDMI TV or monitor, you can connect it to this player using a HDMI cable (Type A). Connect the HDMI jack on the unit to the HDMI jack on a HDMI compatible TV or monitor. Rear of this unit yy When you use the HDMI connection, you can change the resolution (576i, 576p, 720p, or 1080i) for the HDMI output using RES. button on the front panel. yy If your TV is NOT capable of handling 96 kHz sampling frequency, set the [Sampling Freq.
Connecting Component Video Connection Connect the COMPONENT VIDEO OUT jacks on the player to the corresponding input jacks on the TV using component video cable. Connect the left and right AUDIO OUT jacks of the player to the audio left and right IN jacks on the TV using the audio cables.
Connecting 1. Connect one of the Recorder’s DIGITAL AUDIO OUTPUT jacks (OPTICAL or COAXIAL) to the corresponding in jack on your amplifier. Use an optional digital (Optical or Coaxial) audio cable. 2. You will need to activate the Recorder ’s digital output. (See [Audio Settings] on page 25).
Connecting Connection to Another device Accessory Audio/Video (A/V) Connections to Recorder 2 Connect the input jacks (AV IN 2) on the recorder to the audio/video out jacks on your accessory component, using audio/video cables. Connecting a Digital Camcorder Using the front panel DV IN jack, it is possible to connect a DV digital camcorder or video deck or DVD-R/RW recorder and digitally transfer DV tapes or DVD-R/RW discs to DVD-R/RW.
Connecting USB device connection This unit can play movie, music and photo files contained on a USB device. Playback content in the USB device 1. Insert a USB device into the USB port until it fits into place. Compatible USB Flash Drive 1. USB Flash Drive which require additional program installation when you have connected it to a computer, is not supported. 2. USB Flash Drive: USB Flash Drive that support USB1.1. ,,Note yy The contents on the disc cannot be moved or copied to USB Flash Drive.
System Setting 18 System Setting Auto Set Up After the POWER is pressed for the first time to turn on the unit or after resetting the unit, the Initial Setup Wizard function sets the language, tuner channels and clock automatically. 1. Select a language for the Setup menu and onscreen display. Use s/w to select a language then press ENTER (b). [Manual] Enter the necessary information for year, date and time. a/d (left/right): Moves the cursor to the previous or next column.
System Setting Home Menu Overview General Settings From the Home Menu screen you can access all the Media for playback and recording of the unit. Adjust the Setup Settings 1. Press HOME (n).The Home menu appears. The unit will be in tuner mode always when the Home menu appears. 19 You can change the settings of the unit in the [SETUP] menu. 1. Press HOME (n). 2. Use a/d to select the [SETUP] and press ENTER (b). The [SETUP] menu appears. 2. Use a/d to select the desired option. 3 [Easy Menu] Rec.
System Setting Auto Programming This recorder is equipped with a frequency synthesized tuner capable of receiving the analog and digital channels. Switching the program list to DIGITAL TV, ANALOG TV, or RADIO 1. Press w to move the highlight position to top of the program list. 2. Press a/d to select a [DIGITAL TV], [ANALOG TV] or [RADIO]. Selected program list appears. Program Edit You can edit a channel manually (add, delete, name, move, etc.). ,,Note 3 1. Display [SETUP] menu.
System Setting 21 [Program Edit] (Analog channel only) Station Rename Edits the selected program. You can name stations independently. Names can be up to 5 characters long. 6. Press RETURN (x) repeatedly to exit Program List menu Program Edit You can perform a search to select and store an TV channels manually. 1. Use s/w to select a program on the Program List menu then press ENTER (b). Program List options appears on the left side of the Program List menu. 1.
System Setting Sort TV channels manually You can sort the program’s position on the Program List menu. 1. Use s/w to select a program on the Program List menu then press ENTER (b). Program List options appears on the left side of the Program List menu. 2. Use s/w to select [Move] option from Program List options then press ENTER (b). 3. Use s/w to select a desired position then press ENTER (b) to store. 5. Select your region in the [Time Zone] option to set a time relative to area.
System Setting 23 VCR Play Aspect Antenna Feed 5V You can choose: If you are using indoor antenna with a signal amplifier rated at DC 5V, 100mA, the recorder can supply power through ANTENNA IN jack. [AUTO] Automatically plays back Wide-Screen programmes as Wide-Screen and Normal programmes as normal. 1. Display [Setup] menu. [4:3] 3. Use s/w to select [ON] and press ENTER (b) to supply antenna power. Only for playing back Normal format recordings (4:3).
System Setting Language Settings Display Menu Select a language for the [Setup] menu and onscreen display. Disc Menu/Disc Audio/Disc Subtitle Select the language you prefer for the audio track (disc audio), subtitles, and the disc menu. [Original] 3 Refers to the original language in which the disc was recorded. DTV Subtitle Digital channels sometimes provide subtitle, often in a different language. You can set a default subtitle language with this setting.
System Setting 25 Audio Settings Each DVD disc has a variety of audio output options. Set the recorder’s Audio Output according to the type of audio system you use. Dolby Digital [PCM] Select when connected to a 2-channel digital stereo amplifier. The Recorder’s digital audio outputs sounds in the PCM 2ch format when you play a DVD video disc recorded on the Dolby Digital recording system.
System Setting Lock Settings DTV Rating Lock System 1. Display [Setup] menu. Allows you to set up specific programs and ratings through blocking schemes. Also allows you to activate or disable all of the lock schemes previously set up. A password is required to gain access to the lock menu options. When the Lock System is set to [OFF], the DTV Rating is not effective. 3. Use s/w to select [DTV Rating] and press ENTER (b). 1. Select [Lock System] option then press d.
System Setting 27 Set Password DivX Reg. Code 1. Select [Set Password] option then press d. We provide you the DivX® VOD (Video On Demand) registration code that allows you to rent and purchase videos using the DivX® VOD service. For more information, visit www.divx.com/vod. 2. Follow step 2 as shown in [Lock System] above. [Change] Enter the new password twice after entering the current password. [Delete] Delete the current password after entering the current password.
System Setting Recording Settings Rec Mode Set You can set the picture quality for recording; XP (High Quality), SP (Standard Quality), LP (Low Quality), EP (Extend Quality), MLP (Maximum Long Play) 1. Select the [Rec Mode Set] option then press d. 2. Use s/w to select a desired Rec Mode Set (XP, SP, LP, EP or MLP). 3 [XP] – Highest quality setting, gives about 1 hour of recording time on a DVD (4.7GB).
System Setting 29 Disc Settings Disc Format If you load a completely blank disc, the recorder will initialize the disc. [DVD-R] The recorder initialize the disc to Video mode. The recording mode will always be Video mode. [DVD-RW/DVD+RW/DVD+R(DL)] Also, you can reformat the DVD-RW/DVD+RW from the Setup menu as below. 1. Select [Disc Format] option then press d. 2. Press ENTER (b) while [Start] is selected. Format Disc menu appears. 3.
System Setting Disc Label Use this to enter a name for the disc. This name appears when you display disc information onscreen. The disc name can be up to 32 characters long. For discs formatted on a different Recorder, you will see only a limited character set. [MENU/LIST, DISPLAY] Switches the keyboard type (English/Latin Capital, English/Latin Lowercase, Symbols) 6 Choose OK then press ENTER (b) to fix the name and return to the Setup menu. 6. Press HOME to exit the menu.
Operating Operating General Explanation of On-Screen Display This manual gives basic instructions for operating the Recorder. Some DVDs require specific operation or allow only limited operation during playback. When this occurs, the symbol appears on the TV screen, indicating that the operation is not permitted by the Recorder or is not available on the disc. Displaying Information While Watching TV During viewing the TV, press DISPLAY to display/ remove the information displayed on-screen. e.g.
Operating TV Viewing Viewing the EPG (Electronic Programme Guide) The Electronic Programme Guide schedule and program information for digital programs. They also provide local over-the-air programs information including conventional digital programs. Use the Electronic Programme Guide to find programs easily and conveniently and to view schedule and descriptive program information for the programs. To Display the Program Guide Press the EPG button on your remote control.
Operating 33 Timer Recording with Program Guide Displaying Channel List and Changing Channel You can set a timer record using program guide with 8 days. You can display channel list using the ENTER (b) button and switch into other channel on the channel list. 1. Display Program Guide with 8 days. 2. Select a program then press red color button. The red timer icon will be displayed and the program will be memorized by the recorder.
Operating Teletext Operation Teletext on/off Teletext is an optional function, therefore only those with the teletext system can receive the teletext broadcast. 1. Press TEXT to switch to teletext. The initial page or last page appears on the screen. Two page numbers, TV station name, date and time are displayed on the screen headline. The first page number indicates your selection, while the second shows the current page displayed.
Operating 35 Playing a DVD Playback Setup Before using the remote control, press the DVD button to select the device to be operated. Turn the TV on and select the video input source connected to the Recorder. Audio system: Turn the audio system on and select the input source connected to the Recorder. 1. Press OPEN/CLOSE (B) to open the disc tray. 2. Load your chosen disc in the tray, with the playback side down. 3. Press OPEN/CLOSE (B) to close the tray.
Operating Still Picture and Frame-by-Frame Playback 1. Press PAUSE/STEP (M) during playback. The recorder will now go into PAUSE mode. 2. You can advance or back up the picture frameby frame by pressing a/d repeatedly during PAUSE mode. 3. To exit PAUSE mode, press z (PLAY). ,,Note yy The picture frame-by-frame in reverse is not available for Video CD. yy You can advance the picture frame-by-frame by pressing PAUSE/STEP (M) repeatedly on the remote control. Slow Motion 4 1.
Operating 37 Changing the Audio Soundtrack Last Condition Memory Press AUDIO then press a/d repeatedly during playback to hear a different audio language or audio soundtrack if available. This Recorder memorizes last scene from the last disc that is viewed. The last scene remains in memory even if you remove the disc from the Recorder or switch off the Recorder. If you load a disc that has the scene memorized, the scene is automatically recalled.
Operating Playing a VCR Tracking Control Preparation The automatic tracking function adjusts the picture to remove snow or streaks. The AUTO TRACKING function works in the following cases: yy Before using the remote control, press the VCR button to select the device to be operated. yy Turn the TV on and select the video input source connected to the Recorder. yy Audio system: Turn the audio system on and select the input source connected to the Recorder. Normal Playback 1.
Operating 39 Still Picture and Frame-by-Frame Playback 1. Press M (PAUSE/STEP) during playback. A still picture appears on the TV screen. yy If a still picture vibrates vertically, stabilize it by using PR/TRK (s/w) on the remote control. yy If the Recorder is left in the STILL mode for more than 5 minutes, the Recorder will automatically enter the STOP mode to protect the tape and video heads. 2. Press M (PAUSE/STEP) repeatedly to advance the video picture one frame at a time while viewing a still picture.
Operating Movie menu options Playable Audio format 1. Press s/w to select a folder/file on the Movie menu then press ENTER (b). Movie menu options appear. “AC3”, “PCM”, “MP2”, “MP3”, “WMA” 2. Press s/w to select an option, and press ENTER (b). yy Bit rate: within 8 - 320kbps (MP3), 32 - 192kbps (WMA) [Play] Start playback the selected title. [Open] Opens the folder and a list of files in the folder appears.
Operating Playing an Audio CD or MP3/ WMA Disc The Recorder can play audio CDs. Also, the Recorder can play MP3/WMA formatted recordings on CDROM, CD-R, CD-RW, DVD±R or DVD±RW disc. Before playing MP3/WMA recordings, read the notes on MP3/WMA Recordings on page 42. 1. Insert a disc and close the tray. AUDIO CD or MP3/WMA CD menu appears on the TV screen. 41 Music menu options 1. To display menu options, select a track (or folder) on the menu then press ENTER (b. 2.
Operating Search (Audio CD only) Viewing a JPEG File 1. Press SCAN (c or v) during playback. The recorder will now go into SEARCH mode. The recorder can play discs with JPEG files. Before playing JPEG recordings, read “Notes on JPEG Recordings” on page 43. 2. Press SCAN (c or v) to select the required speed: c, ca, cc(backward) or v, dv, vv(forward). Search speed and direction are indicated on the menu screen. 3. To exit SEARCH mode, press z (PLAY). 1. Insert a disc and close the tray.
Operating 43 Notes on JPEG Recordings 6. To stop viewing at any time, press Z (STOP). The Photo menu reappears. Skip Images While viewing a picture, press SKIP (C or V) once to advance to the next file or return to the previous file. yy Depending on the size and number of the JPEG files, it may take several minutes to read the contents of the media.
Operating DVD Recording DVD Recording Notes for DVD recording yy This Recorder cannot record CD-R or CD-RW discs. yy Fingerprints and small scratches on a disc can affect playback and/or recording performance. Please take proper care of your discs. yy The company does not hold any responsibility to compensate the contents which should have been recorded, and any losses or damages (e.g.
Operating 45 Restrictions on video recording yy You cannot record copy-protected video using this recorder. Copy-protected video includes DVD-Video discs and some satellite broadcasts. If copy-protected material is encountered during a recording, recording will pause or stop automatically and an error message will be displayed on-screen. yy Video that is ‘copy-once only’ can only be recorded using a DVD-RW disc in VR mode.
Operating Instant Timer Recording Timer Recording Instant Timer Recording allows you to make a recording easily of a preset length without using the program timer. 1. Press HOME (n) and the Home menu appears. 2. Select [RECORD] > [Timer Record] and press ENTER (b). 1. Follow steps 1-4 as shown left (Basic Recording from a TV). 2. Press X (REC) repeatedly to select the recording time length. Recording starts after the first press. DVD: Each subsequent press increases the recording time by 10 minutes.
Operating 47 6. The [Rec. OK] on the [Check] field on the [Timer Record List] menu indicates the timer recording is programmed correctly. [Rec OK] – Indicates the Timer Record is in recordable condition. [No Disc] – There is no disc in the disc tray. [Invalid disc] – The inserted disc is not recordable. [Unrecordable] – There is no space to record on the disc. Checking Timer Recording Details Programming can be checked whenever the Recorder is turned on. 1. Press HOME (n) and the Home menu appears. 2.
Operating Recording from External Components You can record from an external component, such as a camcorder or VCR, connected to any of the Recorder’s external inputs. 1. Make sure that the component you want to record from is connected properly to the Recorder. See page 16. 2. Press AV/NPUT repeatedly to select the external input to record from. [AV1] – AV1 mounted on back panel. [AV2] – AV IN 2 VIDEO, AUDIO (L/R) mounted on front panel. [DV] – DV Input mounted on front panel. 3.
Operating 49 DVD Editing Title List and Chapter List Menu Overview Using the Title List menu you can edit video content. The editing features available in the Title List menu depend on whether you are editing video on DVD, and whether you’re editing Original content, or a Playlist. There are two ways to edit VR mode DVD-RW discs. You can directly edit the Original content of the disc, or you can create and edit a Playlist.
Operating VR Mode: Original and Playlist Editing Titles, Chapters and Parts Titles in the disc’s original content contain one or more chapters. When you add a disc’s title into the Playlist, all the chapters within that title also added. In other words, chapters in the Playlist behave exactly as chapters on original content. From the Original and Playlist menu you can add or delete parts. Adding a chapter or title to the Playlist creates a new title made up of a section (ie.
Operating Adding Additional Title / Chapters to the Playlist -RWVR You can add an Original title or chapter to add to a Playlist title even if it is already registered. 1. Choose a title or chapter on the [Title ListOriginal] menu or [Chapter List-Original] menu to put into the Playlist, then press ENTER (b). The menu options appears on the left side of the screen. 2. Use s/w to select [Playlist Add] from menu options then press d. 4. Repeat steps 1-3 to add additional title or chapter on the Playlist.
Operating Deleting a Part -RWVR You can delete a part which you do not want in the title. 1. Use a/d/s/w to choose a title you want to delete on the Title List menu then press ENTER (b). The options appears on the left side of the menu. 2. Select [Edit] > [Delete Part] option then press ENTER (b). [Edit] menu appears on the TV screen. Example: Edit (Delete Part) (DVD-VR) Naming a Title -RWVR -RWVideo +RW -R +R You can name the titles. 1.
Operating 53 4. Choose [OK] then press ENTER (b) to fix the name and return to the previous menu screen. 5. Press RETURN (x) repeatedly to exit the menu. ,,Note yy Names can be up to 32 characters long. yy For discs formatted on a different recorder, you will see only a limited character set. yy When recording on DVD-R, DVD-RW or DVD+R discs, the entered name is displayed on the u unit only after finalization. Time Search -RWVR -RWVideo +RW -R +R You can select start point of the title.
Operating 3. Press ENTER (b) to confirm. The chapter’s or title’s thumbnail will dim. ,,Note yy If you select a hidden chapter or title on the Title List or Chapter List menu, you can ‘show’ it by choosing [Show] option on the menu. After doing that, you are able to see the chapter or title. yy You can play hidden chapter or title using [Full Play] option in the menu. Divide One Title Into Two +RW Use this command to split a title up into two new titles. 1.
Operating 55 Combining Two Chapters Into One -RWVR +RW +R Use this function to combine two adjacent chapters into one. 1. On the Chapter List menu, select the second chapter of the two chapters you want to combine then press ENTER (b). The menu options appears on the left side of the screen. Overwriting Recording +RW To overwrite a new video recording on a previously recorded title, follow these steps. This feature is not available for DVD+RW, that always record at the end of the Disc. 1.
Operating Viewing Title List menu displayed on other DVD Recorders or Players +RW +R You can view the Title List menu displayed on the other DVD player that is capable of playing DVD+RW or DVD+R discs. 1. Insert DVD+R or DVD+RW disc recorded already. 2. On DVD mode, press TITLE in Play mode or Stop mode. Title List menu will appear as shown below. ,,Note yy Unfinalized DVD+RW is playable on regular units.
Operating 57 Dubbing Dubbing from VCR to DVD You can copy the contents of a Video tape to a DVD using the DUBBING button. This allows you to archive your old Video tapes to DVD. 1. Insert a blank DVD disc in the DVD deck and close the disc tray. 2. Insert the video tape you wish to copy into the VCR deck. 3. Select VCR mode by pressing VCR on the remote control or pressing DVD/VCR on the front panel. 4.
Operating Recording from a Digital Camcorder You can record from a digital camcorder connected to the DV IN jack on the front panel of this recorder. Using the recorder’s remote, you can control both the camcorder and this recorder. Before recording, make sure that the audio input for the DV IN jack is set up (see page 28). ,,Note yy The source signal must be DVC-SD format. yy Some camcorders cannot be controlled using thisrecorder’s remote.
Troubleshooting Troubleshooting 59 Troubleshooting General Symptom Cause & Solution The Power does not turned on. yy Plug the power cord into the wall outlet securely. The unit does not start playback. yy Insert a playable disc. (Check the disc type, color system, and regional code.) yy Place the disc with the playback side down. yy Place the disc on the disc tray correctly inside the guide. yy Clean the disc. yy Cancel the Rating function or change the rating level. The angle cannot be changed.
Troubleshooting Playback Symptom Cause & Solution Cannot play a disc recorded using this unit on other player. yy Finalize the disc (see page 29). yy Check the disc compatibility of the player. yy Place the disc on the disc tray correctly inside the guide. yy Discs recorded with copy-once material cannot be played on other players. The subtitle language cannot be changed or turned off. yy Subtitles are not recorded on the DVD Video being played. Cannot play MP3/WMA/JPEG/ MPEG4 files.
Troubleshooting Stereo Audio Record and/ Playback is not present. 61 yy TV is not Stereo-compatible. yy Broadcast programme is not in stereo format. yy The A/V Output jacks on the unit are not connected to TV A/V In jacks. Even though the timer is set, the recorder will not record when. yy There is no disc loaded. yy A non-recordable disc is loaded. yy Disc Protect is set to [ON] in the Disc menu (see page 30).
Appendix 62 Appendix Controlling a TV with the Supplied Remote Control You can control your TV using the buttons below. 6 By pressing You can 1 (TV POWER) Turn the TV on or off. AV/INPUT Switch the TV’s input source between the TV and other input sources. PR/TRK (+/-) Scan up or down through memorized channels. VOL +/– Adjust the volume of the TV ,,Note Appendix Depending on the unit being connected, you may not be able to control your TV using some of the buttons.
Appendix 63 Area Code List Choose an area code from this list.
Appendix Language code List Use this list to input your desired language for the following initial settings: [Disc Audio], [Disc Subtitle] and [Disc Menu].
Appendix 65 Trademarks and Licenses Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC. “DVD Logo” is a trademark of DVD Format/Logo Licensing Corporation. 6 Appendix DivX®, DivX Certified® and associaated logos are trademark of DivX, Inc., and are used under license.
Appendix Specifications General Power requirements AC 110-240 V, 50/60 Hz Power consumption 23 W Dimensions (W x H x D) Approx. 430 x 78.5 x 260 mm (w x h x d) Net Weight (Approx.) 4.
Appendix 67 System Signal system Standard PAL color TV system Frequency response 20 Hz to 20 kHz (48 kHz, 96 kHz, 192 kHz sampling) Signal-to-noise ratio More than 100 dB (ANALOG OUT connectors only) Harmonic distortion Less than 0.008% Dynamic range More than 95 dB Bus Power Supply (USB) DC 5 V 0 500 mA yy Design and specifications are subject to change without notice.
Appendix Maintenance Handling the Unit When shipping the unit Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory. Keeping the exterior surfaces clean yy Do not use volatile liquids such as insecticide spray near the unit. yy Wiping with strong pressure may damage the surface. yy Do not leave rubber or plastic products in contact with the unit for a long period of time.
