Owner's Manual

System Setting 23
System Setting
3
VCR Play Aspect
You can choose:
[AUTO]
Automatically plays back Wide-Screen
programmes as Wide-Screen and Normal
programmes as normal.
[4:3]
Only for playing back Normal format recordings
(4:3).
[16:9]
Only for playing back Wide-Screen format
recordings (16:9).
VCR Play System
Your video recorder uses triple colour standards,
Auto, PAL and MESECAM. During play your
video player should select the colour system
automatically, however if you experience problems
you may need to do it manually.
Power Save Mode
You can set up the unit into an economic power
save mode.
Nothing is displayed in the display window.
[ON]
Power Save Mode is active..
[OFF]
Power Save Mode is not active.
Antenna Feed 5V
If you are using indoor antenna with a signal
amplier rated at DC 5V, 100mA, the recorder can
supply power through ANTENNA IN jack.
1. Display [Setup] menu.
2. Use
a/d/s/w
to select the [Antenna Feed
5V], and press ENTER (
b
).
3. Use
s/w
to select [ON] and press ENTER (
b
)
to supply antenna power.
The [Antenna Feed 5V] option must be set to
[OFF] when your indoor antenna is supplied
the power from the mains. If you set the
[Antenna Feed 5V] option to [ON] for the
indoor antenna which is supplied power from
the mains, it may cause serious defect to this
unit.
,
Note
Initialization
You can reset the recorder to its original factory
settings.
[Factory Set] If you need to, you can reset the
recorder to all its factory settings. Some options
cannot be reset. (DVD Rating, Password, and Area
Code) Select [Factory Set] icon then press ENTER
(
b
) and auto setup menu will appear, see page 18.
1. Select [Initialization] option then press
d
.
2. Press ENTER (
b
) and then confirm message will
appear.
3. Use
a/d
to select [Yes] or [No] then press
ENTER (
b
).