Owner's Manual

18
General
Settings
(Continued)
Auto Clock Set
When Channel auto search is
completed
the actual
Time and Date are also set
automatically.
If the time in
the recorder
display
is not
correct,
the clock must be
set
manually.
1. Select
[Clock set] option
then
press
B.
2. Use v /
V
to select
[Auto] option
then
press
ENTER.
Note:
There are cases where the TV station does not
send,
or sends
wrong
date and/or time information and the
recorder sets the incorrect time.
If this
happens,
we recommend that
you
set the clock
manually.
Manual Clock Set
1. Select
[Clock set] option
then
press
B.
2. Use v /
V
to select
[Manual] option
then
press
ENTER.
3. Enter the
necessary
information for date and time.
b
/ B
(left/right):
Moves the cursor to the
previous
or next column.
v /
V
(up/down): Changes
the
setting
at the
current cursor
position.
4. Press ENTER to confirm
your setting.
TV
Aspect
Selects the
aspect
ratio of the connected TV
(4:3
standard or
wide).
[4:3]
Select this when
connecting
to a 4:3 screen
TV. When
you
select
[4:3],
set
[Display Mode]
below.
[16:9]
Select this when
connecting
to a wide-screen
TV or TV with a wide mode function.
Display
Mode
Selects how to
display
a wide
picture
on the screen
when
[4:3]
is selected in
[TV Aspect].
[Letter Box] Displays
a wide
picture
with bands on
the
upper
and lower
portions
of the screen.
[Pan Scan] Automatically displays
a wide
picture
on
the entire screen and cuts off the
portions
that do
not fit.
AV 2
Connection
You can connect a decoder or other device to the
EURO AV2 DECODER socket on the back.
[Decoder]
Select
[Decoder]
if
you
connect the
recorder's EURO AV2 DECODER
jack
to a PAY-TV
or Canal Plus decoder.
[Others]
Select
[Others]
if
you
connect the
recorder's EURO AV2 DECODER
jack
to a VCR or
similar
recording
device.
Power Save Mode
You can set
up
the unit into an economic
power
save
mode.
Nothing
is
displayed
in the
display
window
when the unit is turned off.
[OFF]
Power Save Mode is not active.
[ON]
Power Save Mode is active.
Notes:
The encoded television
signals (CANAL+
or
PREMIERE)
are not decoded in the Power Save
Mode.
The Power Save Mode is not available in the
standby
mode for the timer
recording
and when
power
off of the unit after
receiving
the encoded
television
signals (CANAL+
or
PREMIERE).
Initialization
You can reset the recorder to its
original factory
settings
and initialize the HDD or
Memory
Card.
[Factory Set]
If
you
need
to,
you
can reset the
recorder to all its
factory settings.
Some
options
cannot be reset.
(Rating,
Password,
and Area
Code)
[HDD format]
Initializes the HDD
(Hard
Disk
Drive):
everything
recorded on the HDD will be erased.
[M/C format]
Initializes the M/C
(Memory Card):
everything
recorded on the
Memory
Card will be
erased.
1. Select
[Initialize] option
then
press
B.
2. Press v /
V
to select the desired
option
then
press
ENTER.
The confirm
message
will
appear.
3. Use
b
/ B to select
[Yes]
or
[No]
then
press
ENTER.