Owner's Manual

10
Connecting to the antenna
Remove the antenna cable plug from your TV set and
insert it into the antenna socket at the back of the
recorder. Plug one end of the antenna cable into the
TV socket on the recorder and the other end into the
antenna input socket on your TV set.
RF coaxial connection
Connect the ANTENNA OUT jack on the recorder to
the antenna input jack on the TV using the 75-ohm
Coaxial Cable supplied (R). The ANTENNA OUT jack
passes the signal through from the ANTENNA IN jack.
a ANTENNA IN
Connect the antenna to this terminal.
b COMPONENT OUTPUT (Y P
B PR)
Connect to a TV with Y P
B PR inputs.
c INPUT 1 (VIDEO IN/AUDIO IN (Left/Right))
Connect the audio/video output of an external
source (Audio system, TV/ Monitor, VCR,
Camcorder, etc.).
d Cooling fan
e AC Power Cord (AC IN ~)
Plug into the power source.
f ANTENNA OUT
Passes the signal from the ANTENNA IN jack to
your TV/monitor.
g COAXIAL (Digital audio output jack)
Connect to digital (coaxial) audio equipment.
h AUDIO OUTPUT (Left/Right)
Connect to a TV with audio inputs.
i VIDEO / AUDIO OUTPUT (Left/Right)
Connect to a TV with video/audio inputs.
Rear Panel
Hookup and Settings
abc d e
fghi
Rear of the recorder
Rear of TV