Owner's Manual

13
Hookup and
Settings
Accessory Audio/Video (A/V)
Connections
Connecting to the INPUT 1 or AV IN 2
Jacks
Connect the input jacks (INPUT 1, AV IN 2) on the
recorder to the audio/video out jacks on your
accessory component, using audio/video cables.
Auto Setup
After the POWER is pressed for the first time to turn
on the unit or resetting the unit, the Initial Setup
Wizard function sets the language, clock and tuner
channels automatically.
1. Select a language for the Setup menu and on-
screen display. Use v / V to select a language
then press ENTER.
2. Please check your antenna connections.
Press ENTER to move next step.
3. Use v / V / b / B to select a audio system then
press ENTER while [Start] option is selected.
The tuner will automatically cycle through all
available channels in the area and place them in
the tuner’s memory.
4. Enter the necessary information for date and time.
• b / B (left/right): Moves the cursor to the
previous or next column.
• v / V (up/down): Changes the setting at the
current cursor position.
• Press ENTER to confirm your setting.
5. Press ENTER while [Close] is highlighted to finish
setup.