Owner's Manual

18
Progressive
Scan
Progressive
Scan Video
provides
the
highest quality
pictures
with less
flickering.
If
you
are
using
the COMPONENT VIDEO OUT/
PROGRESSIVE SCAN
jacks,
but are
connecting
the
recorder to a standard
(analog)
television,
set
Progressive
Scan to
[OFF].
If
you
are
using
the COMPONENT VIDEO OUT/
PROGRESSIVE SCAN
jacks
for connection to a TV
or monitor that is
compatible
with a
progressive
scan
signal,
set
Progressive
Scan to
[ON].
Caution
Once the
setting
for
Progressive
Scan
output
is
entered,
an
image
will
only
be visible on a
Progressive
Scan
compatible
TV or monitor. If
you
set
Progressive
Scan to
[ON]
in
error,
you
must reset the
recorder.
First,
remove the disc in the recorder.
Next,
press
STOP
(x)
and hold it for five seconds before
releasing
it. The video
output
will be restored to the
standard
setting,
and a
picture
will once
again
be
visible on a conventional
analog
TV or monitor.
PBC
PBC stands for
Playback
Control and refers to
special
menus and
navigation
features that are available on
some Video CDs.
[ON]
Video CDs are
played according
to the
PBC,
if
available.
[OFF]
Video CDs are
played
the same
way
as Audio
CDs.
Initialization
You can reset the recorder to its
original factory
settings
and initialize the HDD or
Memory
Card.
[Factory Set]
If
you
need
to,
you
can reset the
recorder to all its
factory settings.
Some
options
cannot be reset.
(Rating,
Password,
and Area
Code)
[HDD format]
Initializes the HDD
(Hard
Disk
Drive):
everything
recorded on the HDD will be erased.
[M/C format]
Initializes the M/C
(Memory Card):
everything
recorded on the
Memory
Card will be
erased.
1. Select
[Initialization] option
then
press
B.
2. Press v /
V
to select the desired
option
then
press
ENTER.
The confirm
message
will
appear.
3. Use
b
/ B to select
[Yes]
or
[No]
then
press
ENTER.
Language Settings
Display
Menu
Select a
language
for the
Setup
menu and on-screen
display.