RH2T7/RH2S8/RH2S9-P1L_BGBRLLK-ENG Digital TV HDD & DVD RECORDER OWNER’S MANUAL MODEL: RHT297H RHD298H RHD299H Before connecting, operating or adjusting this product, please read this instruction booklet carefully and completely. FOR THE GUARANTEE TERMS & CONDITIONS, PLEASE REFER TO BACK COVER OF THIS MANUAL.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-9 About the symbol display . . . . . . . . . . . . . . . . . . . . .4 Symbol Used in this Manual . . . . . . . . . . . . . . . . . . . . .4 Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Recordable and Playable Discs . . . . . . . . . . . . . . . . . .5 Playable Discs / Regional Code . . . . . . . . . . . . . . . . . .6 Availability of copying or moving feature . . . . . . . . . . . .
Introduction Notes on Discs To ensure proper use of this product, please read this owner’s manual carefully and retain for future reference. Handling Discs Do not touch the playback side of the disc. Hold the disc by the edges so that fingerprints do not get on the surface. Never stick paper or tape on the disc. This manual provides information on the operation and maintenance of your recorder. Should the unit require service, contact an authorized service location.
Introduction Recordable and Playable Discs DVD-RW (Digital Video Disc - ReWritable): DVD-RW discs can be formatted for VR mode recording or Video mode recording. These Discs can be recorded on repeatedly. Recordings can be erased, then you can record again on the same Disc.
Playable Discs DVD (8 cm / 12 cm disc) Discs such as movies that can be purchased or rented Video CD (VCD) (8 cm / 12 cm disc) VIDEO CDs or CD-Rs/CD-RWs in VIDEO CD/Super VIDEO CD format Audio CD (8 cm / 12 cm disc) Music CDs or CD-Rs/CD-RWs in music CD format that can be purchased CD-R/CD-RW (8 cm / 12 cm disc) CD-R/CD-RW discs that contain audio titles, DivX, MP3, WMA, or JPEG files.
Using an USB Flash Drive (RHD298H/RHD299H only) The internal hard disk drive (HDD) is a fragile piece of equipment. Please use the recorder following the guidelines below to protect against possible HDD failure. We recommend that you back up your important recordings onto DVD discs in order to protect against accidental loss. This unit can play the MP3 / WMA / JPEG files contained in the USB Flash Drive. Do not move the recorder while it is on.
Front Panel a b c d efghij k d Remote Sensor Point the recorder remote control here. e Z (OPEN/CLOSE) Opens or closes the disc tray. f HDD/DVD Set the recorder’s mode to HDD or DVD. RHT297H m a b c n d efg hij k g RESOLUTION Sets the output resolution for HDMI and COMPONENT OUTPUT jacks. - HDMI: 576i, 576p, 720p, 1080i - COMPONENT: 576i, 576p RHD298H/RHD299H lm n h N / X (PLAY / PAUSE) Starts playback. Pause playback or recording temporarily, press again to exit pause mode.
a REC (z): Starts recording. TIMESHIFT: Activates pause live TV/playback (timeshift) for a live TV program. TV Control Buttons: See page 63. b TEXT: Enters a digital text service. FAV: Shows favorite program list menu. b c d e a POWER: Switches the recorder ON or OFF. OPEN/CLOSE (Z): Opens and closes the disc tray. DVD: Selects the unit’s function mode to DVD. HDD: Selects the unit’s function mode to HDD.
Hookup and Settings Rear Panel a f b g h i j c d k l a ANTENNA IN Connect the antenna to this terminal. h COAXIAL (Digital audio out jack) Connect to digital (coaxial) audio equipment. b COMPONENT OUTPUT (Y PB PR) Connect to a TV with Y PB PR inputs. i S-VIDEO OUTPUT Connect to a S-Video Input on TV. c AV 2 (DECODER) Connect the audio/video output of an external source (Pay-TV decoder, Set Top Box, VCR, etc.). j AUDIO OUTPUT (Left/Right) Connect to a TV with audio inputs.
Picture and sound Digital TV is a transmission technology that replaces the traditional analogue technique. This means that several TV channels, radio channels and other digital services can be transmitted on the same space as just one channel took up before. As a consumer you get access to many more channels and services than before at the same time as they are received with perfect picture and audio quality.
SCART connection Connections to Your TV Make one of the following connections, depending on the capabilities of your existing equipment. When using the COMPONENT OUTPUT jacks, set the [Video Output Format] option in the setup menu to [YPBPR]. When using the SCART jack, set the [Video Output Format] option in the setup menu to [RGB]. Tips Depending on your TV and other equipment you wish to connect, there are various ways you could connect the recorder.
HDMI connection HDMI compatible TV HDMI If you have an HDMI TV or monitor, you can connect it to this recorder using an HDMI cable. 1. Connect the HDMI OUTPUT jack on the recorder to the HDMI INPUT jack on a HDMI compatible TV or monitor (H). Hookup and Settings H 2. Set the TV’s source to HDMI (refer to TV’s Owner’s manual). Notes: If your TV is NOT capable of handling 96 kHz sampling frequency, set the [Sampling Freq.] option to [48 kHz] on the setup menu (See page 22).
Connecting to an Amplifier Rear of the recorder Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic ll/ Pro Logic Connect the Left and Right AUDIO OUTPUT jacks on the recorder to the audio left and right in jacks on your amplifier, receiver, or stereo system, using the audio cables (A).
TV Accessory Audio/Video (A/V) Connections VCR, Cable Box, or Satellite Tuner, etc. Connecting a PAY-TV/Canal Plus Decoder Hookup and Settings You can watch or record PAY-TV/Canal Plus programs if you connect a decoder (not supplied) to the recorder. Disconnect the recorder’s mains lead from the mains when connecting the decoder. To watch or record PAY-TV/Canal Plus programs, set [AV2 Connection] option to [Decoder] (see page 20) and set the program’s [CANAL] option to [On] on the Setup menu (page 20).
Connecting to the AV IN 3 Jacks Connect the input jacks (AV IN 3) on the recorder to the audio/video out jacks on your accessory component, using audio/video cables. Jack panel of Accessory Component (VCR, Camcorder, etc.) AUDIO OUTPUT R Auto Setup After the POWER is pressed for the first time to turn on the unit or resetting the unit, the Initial Setup Wizard function sets the language, clock and tuner channels automatically. 1. Select a language for the Setup menu and onscreen display.
Initial Settings From the Home Menu screen you can access all the Media for playback and recording of the recorder. In this menu system, there are several ways to customize the settings provided. Most menus consist of three levels to set up the options, but some require greater depth for the variety of settings. 1. Press HOME to display the Home Menu screen. 2. Use the b / B buttons to select a main option you want. Sub options appears. General Operation 3. Use the v / V and OK ( sub option you want.
General Settings Manual Channel Add This feature manually adds channels. Auto Programming This recorder is equipped with a frequency synthesized tuner capable of receiving up to 88 analog channels and 500 digital channels. Preparation: Connect the recorder to the desired type of antenna, as shown in Connecting to the Antenna on page 11. Note: Password is needed to access the [Add Channel] option if [Lock System] option is set to [On]. 1. Select the [Program Edit] option then press B . 2.
You can edit a channel manually (name, move, etc.). Note: Password is needed to access the [Program Edit] option if [Lock System] option is set to [On]. 1. Select the [Program Edit] option then press B . 2. Use v / V to select the [Edit] option then press OK ( ). The Program List menu appears. Switching the program list to DIGITAL TV, ANALOG TV, or RADIO 1. Press v to move the highlight position to top of the program list. 2. Press b / B to select a [DIGITAL TV], [ANALOG TV], or [RADIO].
Program Edit (Continued) Manual Clock Set Program Edit You can perform a search to select and store TV channels manually. When you select [Program Edit] in step 4 on the previous page, the display for setting channels appears. 1. Select [Clock set] option then press B. 1. Use b / B to select the item and press v / V to change the setting. 2. Use v / V to select [Manual] option then press OK ( ). 3. Enter the necessary information for date and time.
General Settings (Continued) Language Settings Antenna feed 5V Initialization Display Menu You can reset the recorder to its original factory settings and initialize the HDD. [Factory Set] If you need to, you can reset the recorder to all its factory settings. Some options cannot be reset. (DVD Rating, Password, and Area Code) Select [Factory Set] icon then press OK ( ) and auto setup menu will appear, see page 16. Select a language for the Setup menu and on-screen display.
Audio Settings Lock (Parental Control) Settings Each DVD disc has a variety of audio output options. Set the recorder’s Audio Output according to the type of audio system you use. Lock System Dolby Digital / DTS / MPEG [Bitstream]: Select “Bitstream” if you connect the recorder’s DIGITAL AUDIO OUTPUT jack to an amplifier or other equipment with a Dolby Digital, DTS or MPEG decoder. [PCM] (for Dolby Digital / MPEG): Select when connected to a two-channel digital stereo amplifier.
DTV Rating You can set the ratings to block out all the programs with ratings above a specified level. 1. Select [DTV Rating] option then press B. 2. Follow step 2 as shown “Lock System”. 3. Select a rating using the v / V buttons. [No Control]: If you select [No Control], DTV Rating is not active and you can view all programs. [04 Years] - [18 Years]: Rating [04 Years] has the most restrictions and rating [18 Years] is the least restrictive. [Lock All]: If you select [Lock All], all programs are locked.
Recording Settings TV Recording Audio When TV recording with bilingual, you can choose audio channel to record. [Main+Sub] Main language and Sub language [Main] Main language only [Sub] Sub language only Auto Chapter Record Mode Set You can set the picture quality for recording; XP (High Quality), SP (Standard Quality), LP (Low Quality), EP (Extend Quality). MLP (Maximum Long Play) XP – Highest quality setting, gives about 1 hour of recording time on a DVD (4.7GB).
Finalize Disc Format Finalizing ‘fixes’ the recordings in place so that the disc can be played on a regular DVD player or computer equipped with a suitable DVD-ROM drive. Finalizing a disc creates a menu screen for navigating the disc. This is accessed by pressing MENU/LIST or TITLE. If you load a completely blank disc, the recorder will initialize the disc. DVD-R: The recorder initialize the disc to Video mode. The recording mode will always be Video mode.
Disc Settings (Continued) Disc Label Use this to enter a name for the disc. This name appears when you load the disc and when you display disc information on-screen. The disc name can be up to 32 characters long. For discs formatted on a different recorder, you will see only a limited character set. 1. Select [Disc Label] option then press B. 2. Press OK ( ) while [Edit] is selected. Keyboard menu appears. To enter characters, see page 54.
Displaying Information Displaying Disc Information on-screen Displaying Information while TV viewing You can display various information about the disc loaded on-screen. Note: Program information is dependant and supplied by broadcaster. In some cases when INFO (i) button is pressed it may not be present or updated. In these cases please wait a few seconds before pressing INFO (i) button again so as the unit can update information. 1. Press INFO (i) once to show current status.
TV Viewing Program Guide (Digital program only) The Program Guide contains schedule and program information for digital programs. They also provide local over-the-air programs information including conventional digital programs. Use the Program Guide to find programs easily and conveniently and to view schedule and descriptive program information for the programs. To Display the Program Guide To tune to another current channel Use b / B / v / V to select a current channel then press OK ( ).
Program Selection Switching Program List You can select a program as shown below. You can switch the program list to DIGITAL TV, ANALOG TV, or RADIO Number buttons Use Number (0-9) buttons to select a program directly. PR +/– buttons Use PR +/– on the remote control or PROG v / V on the front panel to cycle the recorder through the programs in memory. 1. Press v to move the highlight position to top of the program list. 2. Press b / B to select a [DIGITAL TV], [ANALOG TV], or [RADIO].
Viewing a digital text service Many digital TV channels broadcast information via their text service. This digital service includes high quality digital text and graphics along with advanced navigation options. Additionally, this recorder has access to dedicated text channels transmitted by the broadcasters. The appearance, content and navigation methods of all digital text services are decided by the broadcaster. 1. Press TEXT or Red color button to bring up the text menu for the current channel. 2.
Playback General Playback Features 1. Load your chosen disc in the tray, with the playback side down. 2. Starts playback using HOME menu (see page 17). 3. To stop the playback, press STOP (x). The unit records the stopped point, depending on the disc. “Xx” appears on the screen briefly. Press PLAY (N) to resume playback (from the scene point). If you press STOP (x) again or unload the disc (“x” appears on the screen.), the unit will clear the stopped point. 4. Press OPEN/CLOSE (Z) to remove the disc.
General Playback Features (Continued) Buttons Operations REPEAT During playback, press REPEAT repeatedly to select a desired repeat mode. HDD (Title/Off) DVD, Video mode DVD-R/RW (Chapter/Title/Off) VR mode DVD-RW, DVD+R/RW, DVD-RAM (Chapter/Title/All/Off) Video CD, Audio CD (Track/All/Off) MP3/WMA (Track/Folder/Off) Notes: On a Video CD with PBC, you must set PBC to [OFF] in the Setup menu to use the Repeat function. See page 26.
VCD The menu screen may be displayed first after loading a DVD or Video CD which contains a menu. Marker Search HDD DVD ALL VCD To enter a Marker DVD Use the b / B / v / V buttons to select the title/chapter you want to view, then press OK ( ) to start playback. Press TITLE or MENU/LIST to return to the menu screen. You can start playback from up to six memorized points. To enter a marker, press MARKER at the desired point on the disc. The Marker icon appears on the TV screen briefly.
3D Surround DVD ALL VCD DivX This unit can produce a 3D Surround effect, which simulates multi-channel audio playback from two conventional stereo speakers, instead of the five or more speakers normally required to listen to multichannel audio from a home theater system. PIP (Picture in Picture) HDD DVD ALL VCD This function enables you to view the stored stations in sub picture during playback. 1. Press INFO (i) twice during playback. The On-Screen Display appears on the TV screen. 2.
Playing a DivX Movie File The recorder can play DivX files. Before playing DivX files, read “DivX file requirement” on right. Note for model RHD298H/RHD299H This recorder cannot play back the DivX file(s) in the USB Flash Drive. The DivX file in the USB Flash Drive can only be copied to HDD. 1. Press HOME then select [MOVIE] option. 2. Select a media that contains DivX file(s) then press OK ( ). The [Movie List] menu appears on the TV screen. 2. Press v / V / b / B to select an option, and press OK ( ).
Playing an Audio CD or MP3/WMA file 2. Press v / V / b / B to select an option, and press OK ( ). The recorder can play audio CDs and MP3/WMA files. Before playing MP3/WMA files, read “MP3/WMA audio file requirement” on right. 1. Press HOME. The HOME menu appears. 2. Select [MUSIC] option. 3. Select a media that contains MP3/WMA or audio title then press OK ( ). The [Music List] menu appears on the TV screen. 4. Use v/V to select a track then press PLAY (N). Playback starts.
Program Playback with Audio CD and MP3/WMA file Program Playback enables you to make custom playlists of Audio CD or MP3/WMA tracks. Programs can contain up to 99 Audio CD tracks or 256 MP3/WMA files. 1. Use v / V to select a track/file (or folder) on the Audio CD or Music menu. You can select all MP3/WMA files and folders on the Music menu by pressing CLEAR/EXIT button. To cancel the selections, press CLEAR/EXIT again. Program List menu options 1.
Viewing a JPEG File Photo List menu options The recorder can play JPEG files. Before playing JPEG recordings, read “Photo file requirement” on right. 1. Press v / V to select a file on the [Photo List] menu then press OK ( ). The menu options appear. The menu options displayed differ depending on the selected media. You can select all files and folders on the menu by pressing CLEAR/EXIT button. To cancel the selections, press CLEAR/EXIT again. 1. Press HOME. The HOME menu appears. 2.
Skip Images While viewing a picture, press SKIP (.or >) once to advance to the next file or return to the previous file. Rotate Images Use v / V while viewing a picture to rotate the picture clockwise or counterclockwise. View Slide Shows 1. Select [Slide Show] option on the [Photo List] menu (Refer to “Photo List menu options” on page 38). 2. Press OK ( ). The Slide Show menu appears. [All] Views slide show all files. [Speed] option: Sets the Slide Show speed to [Slow], [Normal], or [Fast]. 4.
Editing a MP3/WMA, JPEG, DivX file These descriptions are MP3 file’s operation for example, other kind’s files are operated same way. Note for model RHD298H/RHD299H The DivX, MP3, WMA and JPEG files on the disc or HDD cannot be copied or moved to USB Flash Drive. Naming a file on the HDD You can name MP3/WMA, JPEG or DivX file(s)/ folder(s) on the HDD independently. Names can be up to 32 characters long. 1. Select a file you wish to rename on the menu. 2. Press OK ( ). The menu options appear on the menu.
Copying a file(s) to the HDD You can copy a file(s)/folder(s) to the HDD. 1. Select a file you wish to copy on the menu. You can select all files and folders on the menu by pressing CLEAR/EXIT button. To cancel the selections, press CLEAR/EXIT again. Selecting multiple files (folders) 1. Press MARKER. A check mark appears on the file or folder. Press MARKER again to cancel the marked file or folder.
Recording About DVD recording Notes: This recorder cannot make recordings on CD-R or CD-RW discs. Our company takes no responsibility for recording failure due to power outages, defective discs, or damage to the Recorder. Fingerprints and small scratches on a disc can affect playback and/or recording performance. Please take proper care of your discs.
Jump to Start or End during Timeshift HDD Do not miss a scene from a live broadcast. If the telephone rings while you are watching your favorite live broadcast, just press “TIMESHIFT” and “PAUSE” before answering the phone. The timeshift function will be activated and the broadcast is then recorded for later viewing. After the phone call or viewing interruption, press “PLAY” or “SCAN” to watch the program. Press “STOP” to return to the live broadcast.
Basic Recording from a TV HDD Follow the instructions below to record a TV program. Recording starts immediately and continues until the disc is full or you stop the recording. 1. Press PAUSE/STEP (X) to pause recording. 2. When you want to continue recording, press PAUSE/STEP (X). Preparation: Set a recording mode as necessary on the setup menu. (XP, SP, LP, EP or MLP) (see page 24). To record one TV program while watching another 1. Press HOME. The HOME menu appears. 2.
This recorder can be programmed to record up to 16 programs within a period of 1 month. For unattended recording, the timer needs to know the channels to be recorded, the starting and ending time. 4. Enter the necessary information for your timer recording(s). 1. Press HOME and select [TV] option. 2. Press v / V to select [Timer Record] option then press OK ( ). The [Timer Record List] menu will appear. 3. Use v / V to select [New] then press OK ( The [Timer Record] menu will appear. ).
Checking Timer Recording Details Programming can be checked whenever the recorder is turned on. 1. Press HOME and select [TV] option. 2. Press v / V to select [Timer Record] option then press OK ( ). The [Timer Record List] menu will appear. Use v / V to select a timer recording. Press OK ( ) to edit the selected program. [Timer Record] menu appears. Press CLEAR/EXIT to delete the selected program from the Timer Record List.
Recording from an External Input HDD Simultaneous recording and playback Recording from External Components Playback another title during recording You can record from an external component, such as a camcorder or VCR, connected to any of the recorder’s external inputs. While the HDD recording is in progress, you can playback a source from other media at the same time. Preparation: Set a recording mode as necessary on the setup menu. (XP, SP, LP, EP or MLP) (see page 24). 2.
MPEG4 Recording HDD You can record a video with MPEG4 video format. Preparation: Set a recording mode as necessary on the setup menu. (XP, SP, LP, EP or MLP) (see page 24). 1. Set the [MPEG4] option to [ON] on the setup menu (See page 24). 2. Select input source you want to record (TV channel, AV input, etc). 3. Start Recording. This unit will record the video with MPEG4 format on the HDD. The recorded contents are listed on the [Movie List] menu. To play back an MPEG4 recordings, refer to pages 35.
HDD Before DV dubbing You can connect a DV-equipped camcorder to this recorder using a single DV cable for input and output of audio, video, data and control signals. This recorder is only compatible with DV-format (DVC-SD, DV25) camcorders. Digital satellite tuners and Digital VHS video recorders are not compatible. You cannot connect more than one DV camcorder at a time to this recorder. You cannot control this recorder from external equipment connected via the DV IN jack (including two recorders).
Editing 12 3 4 5 6 7 Title List and Chapter List Menu Overview Using the Title List menu you can edit video content. The editing features available in the Title List menu depend on whether you are editing video on DVD, or the HDD, and whether you’re editing Original content, or a Playlist. There are two ways to edit VR mode DVD-RW discs. You can directly edit the Original content of the disc, or you can create and edit a Playlist.
HDD, VR Mode: Original and Playlist Editing Adding Chapter Markers Titles, Chapters and Parts You can create chapters within a title by inserting chapter marks at the desired points. HDD Caution When editing using the Delete, Add and Move functions, the start and end frames may not be exactly as set in the start and end point display. During Playlist playback, you may notice a momentary pause between edits. This is not a malfunction. Is editing a DVD like editing a video tape? No.
Making a New Playlist -RWVR RAM Use this function to add an Original title or chapter to the Playlist. When you do this, the whole title or chapter are put into the Playlist (you can delete bits you don’t need later — see Deleting an Original or Playlist title/chapter on page 53). The title appears in the Playlist complete with the chapter markers that appear in the Original. However, if you add more chapter markers to the Original later, these are not automatically copied over into the Playlist title.
Deleting an Original or Playlist Title/Chapter When you erase a title or chapter from the Playlist menu, you only remove it from the Playlist; the title/chapter remains in the Original menu. If you choose to delete a title or chapter from the Original (title/chapter) menu, the title or chapter is actually deleted from the disc and the remaining time available for recording increases. Titles/chapters deleted from the Original are also removed from the Playlist.
Naming a Title 4. Choose OK then press OK ( ) to fix the name and return to the previous menu screen. You can name the titles. The names can be up to 32 characters long. 5. Press BACK (O) repeatedly to exit the menu. 1. Choose the title you want to name on the Title List menu, then press OK ( ). The menu options appears on the left side of the menu. 2. Use v/V to select [Rename] or [Title Name] option then press OK ( ). Keyboard menu appears. Notes: Names can be up to 32 characters long.
HDD This function allows you to access show listings organized by Date, Title, or Category on the Title ListHDD menu. So you can find title you want to watch easily. 1. Choose any title on the Title List-HDD menu, then press OK ( ). The menu options appears on the left side of the menu. 2. Use v/V to select [Sort] option then press OK ( Sort options appears. ). 3. Use v/V to select [Date], [Title] or [Category] option then press OK ( ). After pressing OK ( ), the sorted menu is displayed.
Divide One Title Into Two HDD +RW Moving a Playlist Chapter -RWVR Use this command to split a title up into two new titles. 1. On the Title List menu, select a title you want to divide then press OK ( ). The menu options appears on the left side of the screen. RAM Use this function to re-arrange the playing order of Playlist chapters on the Title List-Playlist menu. Note: This function is not available if there is only one chapter. 2. Select [Divide] option. 1.
Hide a Chapter/Title +RW +R You can skip playing chapters or titles without deleting from the disc. 1. Use v V b B to choose a chapter or title you want to hide on the Title List or Chapter List menu, then press OK ( ). Options appear on the left side of the screen. Additional functions for the recordable DVD discs Using the Title List menu, you can use the disc setting functions without entering the setup menu. 1.
authorized by Macrovision corporation. Reverse engineering or disassembly is prohibited. Dubbing Before Dubbing Use the copying features of this recorder to: Back up important recordings stored on the HDD to a DVD. Make a DVD copy of a recording on the HDD to play in another player. Transfer video from a DVD to the HDD for editing. Transfer edited video from the HDD to DVD. The simplest method of copying is to use the One Touch Copy feature.
Dubbing from HDD to DVD Dubbing from DVD to HDD 1. On the Title List-HDD menu, select a title you want to dub then press OK ( ). The menu options appears on the left side of the screen. 1. On the Title List menu, select a title you want to dub then press OK ( ). Menu options appears on the left side of the screen. Selecting multiple titles on HDD 1. Press MARKER. A check mark appears on the title. Press MARKER again to cancel the marked title. 2. Repeat step 1 to mark additional title.
One Touch Copy (HDD to DVD) The One Touch Copy feature copies the currently playing title from the HDD to DVD. The whole title is copied, regardless of where in the title you start copying. The recorder copies at the maximum speed possible. For One Touch Copy to work, make sure that a recordable DVD disc is loaded. During HDD playback, press DUBBING to copy the current title to DVD. Playback starts again from the beginning of the current title. The on-screen display indicates that the title is being copied.
Reference Playing Your Recordings on Other DVD Players (Finalizing a Disc) Additional Information Most regular DVD players can play finalized discs recorded in Video mode, finalized DVD+R or DVD+RWs. A small number of players can also play DVD-RW discs recorded in VR mode, finalized or not. Check the manual that came with the other player to check what formats of discs it will play.
Language Codes Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.
Controlling Your TV with the Supplied Remote Control You can control the sound level, input source, and power switch of your LG TV with the supplied remote. You can control your TV using the buttons below. Controlling other TVs with the remote You can control the sound level, input source, and power switch of non-LG TVs as well. If your TV is listed in the table below, set the appropriate manufacturer code. 1.
Troubleshooting Check the following guide for the possible cause of a problem before contacting service. Cause Symptom The power cord is disconnected. Plug the power cord into the wall outlet securely. No picture. TV/DVD mode for the recorder is set to TV. Press TV/DVD on the remote control repeatedly to choose DVD mode. TV indicator disappears in the display window. The TV is not set to receive recorder signal output.
Cause Cannot play a disc recorded using this recorder on another player. Cannot record or did not record successfully. Timer recording is not possible. Stereo Audio Record and/or Playback is not present. The remote control does not work properly. The disc was recorded in Video mode. Finalize the disc. (page 25) Some players will not play even a finalized disc recorded in Video mode. No solution.
Specifications General Power requirements Power consumption Dimensions (approx.) Net weight (approx.) Operating temperature Operating humidity Television system Recording format AC 200-240V, 50/60 Hz 30W 430 X 55 X 275 mm (w x h x d) without foot 4.
Technology with the human touch GUARANTEE ● LG Electronics U.K. Ltd. will provide the following services in order to expedite this Guarantee. 1. All faulty components which fail due to defective manufacture will be replaced free of charge for a period of 12 months from the original date of purchase. 2. The dealer (or his service agent) who sold the product will be reimbursed for any labour provided in the repair of this LG equipment, for a period of 12 months from the original date of purchase.
