Owner's Manual

19
Program Edit
You can edit a channel manually (name, move, etc.).
Note:
Password is needed to access the [Program Edit]
option if [Lock System] option is set to [On].
1. Select the [Program Edit] option then press B .
2. Use v / V to select the [Edit] option then press
OK ( ).
The Program List menu appears.
3. Use v / V to select a PR number then press
OK ( ).
4. Use v / V to select the program option then press
OK ( ).
 [Favorite] Set the program to favorite channel.
 [Delete] Disables a program position you do not
need.
 [Move] (Analog channel only) Sorts the program
positions on the Program List.
 [Block] Blocks the program.
 [Station Rename] (Analog channel only)
Changes the station name. The display for
entering characters appears.
To enter characters, see page 54.
 [Program Edit] (Analog channel only) Sets the
analog channel manually.
5. Press BACK (O) repeatedly to exit Program List
menu.
Switching the program list to DIGITAL TV,
ANALOG TV, or RADIO
1. Press v to move the highlight position to top of the
program list.
2. Press b / B to select a [DIGITAL TV],
[ANALOG TV], or [RADIO].
Selected program list appears.
Setting a favorite program
You can set a program to favorite channel.
1. Press v / V to select a program then press
OK ( ).
2. Press v / V to select [Favorite] option then press
OK ( ). The choice menu will appear.
3. Select [ON] then press OK ( ).
The program is set to the favorite program.
AV1 Decoder
Sets the AV1 scart jack for inputting encoded video
signals.
1. Press AV while the Program List menu appears.
2. Press OK ( ) so [Canal+] appears on the display.
Press OK ( ) again to turn off the setting.
 Off: Inputs the signals from the AV1 scart jack.
Normally select this.
 On: The encoded video signal input from the
AV1 scart jack is output to the AV 2 (DECODER)
jack for decoding.
The decoded signal is then input back through
the AV 2 (DECODER) jack so you can record or
view PAY-TV/Canal Plus programs.
Hookup and
Settings