Owner's Manual

26
Disc Settings (Continued)
Disc Label
Use this to enter a name for the disc. This name
appears when you load the disc and when you display
disc information on-screen.
 The disc name can be up to 32 characters long.
 For discs formatted on a different recorder, you will
see only a limited character set.
1. Select [Disc Label] option then press B.
2. Press OK ( ) while [Edit] is selected.
Keyboard menu appears.
To enter characters, see page 54.
Disc Protect
When recording in DVD-RAM / DVD+RW / +R disc or
VR mode formatted DVD-RW disc, set to [ON] to
prevent accidental recording, editing or deleting of the
disc loaded. If you need to unlock the disc to make
edits, select [OFF].
PBC
PBC stands for Playback Control and refers to special
menus and navigation features that are available on
some Video CDs.
 [ON] Video CDs are played according to the PBC, if
available.
 [OFF] Video CDs are played the same way as Audio
CDs.
Network Settings
Software Update
Your recorder is able to receive updates to some of its
features and functions. These updates will occur
automatically, usually at times when the recorder
would likely be turned off.
If your recorder is on when an update is sent, you
may experience a disruption in reception for a few
hours. The recorder turns off then turn the unit back
on after the update is complete.
Please consult the [System Info] screen to check for
an upgrade planned by service provider or distributor.
Caution:
Your recorder must be plugged into AC power to
receive any updates. Do not unplug your recorder
while an update is in progress.
[Standby mode] Press OK ( ) to update the software
when this unit is turned off. Check mark appears.
(Updated time: At every 3:00, 9:00, 15:00 and 21:00
o’clock)
[Operation Mode] Press OK ( ) to update the
software when this unit is turned on. Check mark
appears.

[Time] Set time to update the software.

[Freq.] Selects frequency to update the software.
(Weekly or Dalily)

[Start] Press OK ( ) to update right now.
Note:
If the recorder is turned on, the update is not activated
during recording, Timeshift, viewing a digital text
service or program guide, etc.
System Information
Shows system information. (software version,
DTV Signal Quality and DTV Signal Strength)