Owner's Manual

33
Playback
If a menu screen is displayed
The menu screen may be displayed first after loading a
DVD or Video CD which contains a menu.
Use the b / B / v / V buttons to select the
title/chapter you want to view, then press OK ( ) to
start playback.
Press TITLE or MENU/LIST to return to the menu
screen.

Use the number buttons to select the track you want
to view.
Press BACK (O) to return to the menu screen.

Menu setting and the exact operating procedures
for using the menu may differ depending on the
disc. Follow the instructions on the each menu
screen. You may also set PBC to [OFF] under
Setup menu (see page 26).
Moving to another TITLE
When a disc has more than one title, you can move to
another title as follows:

Press INFO (i) twice during playback then use
v / V to select the title icon. Then, press the
appropriate numbered button (0-9) or press b
/ B
then press OK ( ) to select a title number.
Time Search
To start playing at any chosen time on the disc:
1. Press INFO (i) twice during playback. The time
search box shows the elapsed playing time.
2. Press v / V to select the time clock icon
and “0:00:00” appears.
3. Input the required start time in hours, minutes, and
seconds from left to right.
If you enter the wrong numbers, press b
/ B to
move the under bar (_) to the wrong number. Then
enter the correct numbers.
4. Press OK ( ) to confirm. Playback starts from the
selected time.
Marker Search
To enter a Marker
You can start playback from up to six memorized
points. To enter a marker, press MARKER at the
desired point on the disc. The Marker icon appears on
the TV screen briefly. Repeat to enter up to six
markers.
To Recall or Clear a Marked Scene
1. During disc playback, press SEARCH. The marker
search menu appears on the screen.
2. Use b / B / v / V to select a marked scene that
you want to recall or clear.
3. Press OK ( ) and playback starts from the
marked scene.
or
Press CLEAR/EXIT and the confirm message will
appear. Select [Yes] and press OK ( ) to erase
the scene from the marker search menu.
Note:
All markers are erased if you edit the HDD title
(Delete Part, Divide, Combine).
Camera Angle
If the disc contains scenes recorded at different
camera angles, you can change to a different camera
angle during playback.
1. Press INFO (i) twice during playback.
The On-Screen Display appears on the TV screen.
2. Use v / V to select the Angle icon in the
On-Screen Display.
3. Use b / B to select a desired angle.
The number of the current angle appears on the
TV screen.
Tip:
The ANGLE indicator will appear on the TV screen at
scenes recorded at different angles to indicate that
angle switching is possible.
DVD
VCDDVD ALLHDD
DivXDVD ALLHDD
DivXDVD ALLHDD
VCD
DVD
VCDDVD