Owner's Manual

33
Canceling a timer recording
You can cancel a timer recording before the timer actually starts. Select a timer
recording that you want to cancel on the [Timer Record List] menu and press
CLEAR.
Timer Recording Troubleshooting
Even though the timer is set, the unit will not record when:
– There is no disc loaded and there is not free space on the HDD.
– A non-recordable disc is loaded and there is not free space on the HDD.
–
[Disc Protect] option is set to [ON] in the Setup menu and there is not free
space on the HDD (see page 21).
– The HDD/DVD recorder is in operating a function (recording, copying,
deleting etc.).
– There are already 99 titles (DVD-RW, DVD-R),or 49 titles (DVD+R,
DVD+RW) recorded on the disc and there are already 255 titles recorded
on the HDD.
You cannot enter a timer program when:
– A recording is already underway.
– The time you’re trying to set has already passed.
– There are 16 timer programs set.
If two or more timer programs overlap:
– The earlier program takes priority.
– When the earlier program finishes, the later program starts.
– If two programs are set to start at exactly the same time, the program
entered first takes priority.
Simultaneous playback and record
You can play other contents while you are recording. Simply press HOME and
select the playable contents you want to play while recording. You cannot play-
back other contents while copying or dubbing. The DivX file cannot be played
while recording. When you recording on a DVD, the contents on the DVD can-
not be played.
Time Slip
You can watch the title that you are currently recording to HDD with this func-
tion. After the recording is progressed over 15 seconds, press PLAY to playback
the title that you are currently recoding. If you stop playback the title, returns to
the current recording position.
Recording from a digital camcorder
You can record form a DV-equipped camcorder to the HDD by connecting it
with a DV cable. You can also record form a digital camcorder connected to the
DV in jack on the front of the unit. Press AV repeatedly to select the DV input.
Find the place on the camcorder recording that you want to begin recording
from and press REC on the HDD/DVD recorder to start recording. Depending
on your camcorder, you can use this recorder’s remote to control the camcorder
using the STOP, PLAY and PAUSE functions. Press STOP to end recording.
Recording from external inputs
You can record from an external component, such as a camcorder or VCR,
connected to any of the recorder’s external inputs.
Each press of the AV button changes the input source as described below.
Make sure that the component you want to record from is connected properly to
the HDD/DVD recorder before recording an external source.
 Tuner: Built-in tuner
 AV1: AV1 scart jack mounted on back panel
 AV2: AV2 DECODER scart jack mounted on back panel
 AV3: AV IN 3 (VIDEO, AUDIO (L/R)) mounted on the front panel
 DV: DV IN mounted on front panel
RH387M-P_MHEG_ENG 8/28/08 2:41 PM Page 33