RH497D-P-BESPLLK-ENG 1/9/09 3:42 PM Page 1 ENGLISH RHT497H/RHT498H/RHT499H As an ENERGY STAR® Partner, LG has determined that this product or product models meet the ENERGY STAR® guidelines for energy efficiency. ENERGY STAR® is a U.S. registered mark.
RH497D-P-BESPLLK-ENG 1/9/09 3:42 PM Page 2 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
RH497D-P-BESPLLK-ENG 1/9/09 3:42 PM Page 3 Copyrights Recording equipment should be used only for lawful copying and you are advised to check carefully what is lawful copying in the area in which you are making a copy. Copying of copyright material such as films or music is unlawful unless permitted by a legal exception or consented to by the rights owner. This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights.
RH497D-P-BESPLLK-ENG 1/9/09 3:42 PM Page 4 Contents Before you start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-6 Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Main Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Hooking up the unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-14 Operating USB Flash Drive . . . . . . . . . . . . . . . . . . . . . . . . . .14 Auto setup . . . . .
RH497D-P-BESPLLK-ENG 1/9/09 3:42 PM Page 5 Before you start Recordable and Playable discs This unit can play and record all widely-used DVD types. The table below shows some specific compatibility differences depending on the disc types.
RH497D-P-BESPLLK-ENG 1/9/09 3:42 PM Page 6 Notes on discs Restrictions on copying Depending on the conditions of the recording equipment or the CD-R/RW (or DVD±R/RW) disc itself, some CD-R/RW (or DVD±R/RW) discs cannot be played on the unit. Some video material is copy-once protected: Such material cannot be copied to HDD or DVD. You can identify copy-once protected material during playback by displaying disc information on-screen.
RH497D-P-BESPLLK-ENG 1/9/09 3:42 PM Page 7 Remote control a DVD: Selects the unit’s mode to DVD. PR LIST: Displays the program list menu. HDD: Selects the unit’s mode to HDD. a OPEN/CLOSE: Opens and closes the disc tray. REC(z): Starts recording. Press repeatedly to set the recording time. b SKIP (. / >): Go to next or previous chapter/track/file. PAUSE/STEP (X): Pause playback or recording temporarily.
RH497D-P-BESPLLK-ENG 1/9/09 3:42 PM Page 8 Main Unit a b c d e f k a 1 / I (POWER button) Switches the unit ON or OFF. b Disc Tray Insert a disc here. c DVD Set the recorder’s mode to DVD. HDD Set the recorder’s mode to HDD. v / V: Scans up or down through memorized channels. d Remote Sensor Point the remote control here. e Display window Shows the current status of the unit. T/S: Indicates the timeshift mode. REC: The unit is recording. HDD: The unit is in HDD mode. DVD: The unit is in DVD mode.
RH497D-P-BESPLLK-ENG 1/9/09 3:42 PM Page 9 Hooking up the unit a Antenna connection Connect the Terrestrial TV antenna to the ANTENNA IN jack on the unit. If you want to use an indoor antenna, use one with a signal amplifier rated at 5V, 100mA and set [Antenna Feed 5V] to [ON] in the setup menu. b Antenna connection to your TV Connect one end of the RF cable to ANTENNA OUT jack on the unit and other end to ANTENNA IN jack on your TV. Passes the signal from the ANTENNA IN jack to your TV/monitor.
RH497D-P-BESPLLK-ENG 1/9/09 3:42 PM Page 10 Hooking up the unit - more you can do General about connection Picture and sound Digital TV is a transmission technology that replaces the traditional analogue technique. This means that several TV channels, radio channels and other digital services can be transmitted on the same space as just one channel took up before.
RH497D-P-BESPLLK-ENG 1/9/09 3:42 PM Page 11 S-Video connection Digital audio connection Connect one end of the S-Video cable to the S-VIDEO OUTPUT jack on the unit and the other end to the S-Video INPUT jack on your TV. Connect one ends of the audio cables (red and white) to the analog AUDIO OUTPUT jack on the unit and the other ends to the AUDIO INPUT jack on your TV. Connecting to an amplifier/receiver, Dolby Digital/MPEG/DTS decoder or other equipment with a digital input.
RH497D-P-BESPLLK-ENG 1/9/09 3:42 PM Page 12 HDMI connection If your TV is not equipped with DTS decoder, set the [DTS] options to [OFF] on the setup menu (See page 19). To enjoy DTS multi channel surround, you must connect this unit to a DTS compatible receiver via one of this unit’s digital audio outputs. If there is noise or lines on the screen, please check the HDMI cable. Changing the resolution when the unit is connected with HDMI connector may result in malfunctions.
RH497D-P-BESPLLK-ENG 1/9/09 3:42 PM Page 13 Connecting a PAY-TV/Canal Plus Decoder You can watch or record PAY-TV/Canal Plus programmes if you connect a decoder (not supplied) to the unit. Disconnect the unit’s mains lead from the mains when connecting the decoder. You do not need to turn on the unit to view the signals from the connected tuner on your TV. Pictures containing copy protection signals that prohibit any copying cannot be recorded.
RH497D-P-BESPLLK-ENG 1/9/09 3:42 PM Page 14 Connecting to the AV IN 3 Jacks Operating USB Flash Drive Connect the input jacks (AV IN 3) on the unit to the audio/video out jacks on your accessory component using audio/video cables. ON REMOTE 1.
RH497D-P-BESPLLK-ENG 1/9/09 3:42 PM Page 15 Auto setup When the first time to turn on the unit, the initial setup wizard sets the language, clock and channels automatically. 1 Turn on the unit: The initial setup wizard appears on the screen.
RH497D-P-BESPLLK-ENG 1/9/09 3:42 PM Page 16 Switching the program list on the channel editing screen You can switch the program list on the channel editing screen. Using the Home Menu ON REMOTE 1 Displays the HOME menu: HOME 2 Select a main option: bB 3 Select a sub option: vV 4 Execute the selected option: ENTER 5 Exit the HOME menu: HOME Press v V to move the highlight position to top of the program list.
RH497D-P-BESPLLK-ENG 1/9/09 3:42 PM Page 17 PHOTO HDD – Displays [Photo List] menu, which shows photo files on HDD. (page 31) DISC – Displays [Photo List] menu, which shows photo files on the disc. (page 31) USB – Displays [Photo List] menu, which shows photo files on the USB Flash Drive.
RH497D-P-BESPLLK-ENG 1/9/09 3:42 PM Page 18 Adjust the SETUP settings - more you can do Adjust the general settings TV Aspect – Selects the aspects ratio of the connected TV. [4:3 Letter Box]: Select this when connecting to a standard 4:3 screen TV and prefer the wide picture with bands on the upper and lower portions of the screen. [4:3 Pan Scan]: Select this when connecting to a standard 4:3 screen TV and prefer the wide picture on the entire screen cuts off the portions that do not fit.
RH497D-P-BESPLLK-ENG 1/9/09 3:42 PM Page 19 Adjust the language settings Adjust the audio settings Display Menu – Select a language for the Setup menu and on-screen display. Dolby Digital / DTS / MPEG – Selects the type of digital audio signal when using the DIGITAL AUDIO OUTPUT jack. Disc Menu/Audio/Subtitle – Select a language for the Menu/Audio/Subtitle. [Original]: Refers to the original language in which the disc was recorded.
RH497D-P-BESPLLK-ENG 1/9/09 3:42 PM Page 20 Adjust the lock settings Area code – Select a code for a geographic area as the playback rating level. This determines which area’s standards are used to rate DVDs controlled by the parental lock. See the Area Codes on page 39. DivX Reg. Code– We provide you with the DivX® VOD (Video On Demand) registration code that allows you to rent and purchase videos using the DivX® VOD service. For more information, visit www.divx.com/vod.
RH497D-P-BESPLLK-ENG 1/9/09 3:42 PM Page 21 TV Record Audio – Select an audio channel to record when recording a bilingual program. [Main+Sub]: Main language and sub language [Main]: Main language only [Sub]: Sub language only Auto Chapter – When DVD recording, chapter markers are added automatically in every specified interval (5, 10 or 15 min.). AV2 Recording – Selects a method of inputting video signals for the AV2(DECODER) jack.
RH497D-P-BESPLLK-ENG 1/9/09 3:42 PM Page 22 Adjust the network settings Software Update – Your recorder is able to keep the built-in digital tuner up to date with the latest software. You can either check for updates manually, or have the unit do it automatically at regular interval. While the unit is in updating, there may have a disruption in reception for a few hours. The reception should return to normal after the update is complete. This unit must be plugged into AC power to receive updates.
RH497D-P-BESPLLK-ENG 1/9/09 3:42 PM Page 23 Moving to another title HDD Displaying disc information ON REMOTE 1 Play the disc loaded on the unit: PLAY DVD ALL When a disc has more than one title, you can move to another title. Press DISPLAY twice during playback then use v / V to select the title icon. Then, press the appropriate numbered button (0-9) or b / B to select a title number.
RH497D-P-BESPLLK-ENG 1/9/09 3:42 PM Page 24 Displaying information while watching TV Changing TV program During viewing the TV, Press DISPLAY to display the information displayed on-screen. Use PR+/PR- on the remote control to change the programs in memory or use numbered (0-9) buttons to select a program directly. e a b c Changing TV program with program list You can display TV program list using the PR LIST button and switch into other TV program on the channel list.
RH497D-P-BESPLLK-ENG 1/9/09 3:42 PM Page 25 Switching the EPG menu Using the digital EPG ON REMOTE 1 Displays the EPG menu: EPG 2 Select a TV program: vV 3 Displays the next/previous menu list: .> 4 Shows the selected program currently on air: ENTER 5 Exit the EPG menu: EPG or RETURN The EPG screen provides two search menus. Press yellow color button when the EPG menu is displayed. Now/Next: The screen shows now and next programs.
RH497D-P-BESPLLK-ENG 1/9/09 3:42 PM Page 26 Viewing a Teletext service Teletext is a free broadcasting service by some TV stations which gives up-to-the-minute information on news, weather, television programs, share prices and many other topics. The recorder gives you access to teletext which is greatly improved in various aspects such as text and graphics. This teletext can be accessed by special teletext services and specific services which broadcast teletext.
RH497D-P-BESPLLK-ENG 1/9/09 3:42 PM Page 27 Pause a playback Playing repeatedly HDD Press PAUSE/STEP (X) to pause playback. Press PLAY ( N) to continue playback. Press REPEAT repeatedly to select an item to be repeated. The current title, chapter, folder or track will be played back repeatedly. To return to normal playback, press REPEAT repeatedly to select [OFF]. Frame-by-Frame playback HDD DVD ALL Press PAUSE/STEP (X) repeatedly to play Frame-by-Frame playback.
RH497D-P-BESPLLK-ENG 1/9/09 3:42 PM Page 28 Divx file requirement Playing DivX® movie files ON REMOTE 1 Displays the HOME menu: HOME 2 Selects a [MOVIE] option: bB 3 Selects an option that contains DivX file: v V, ENTER 4 Selects a movie file from the menu: vV 5 Plays the selected movie file: PLAY 6 Stops the playback: STOP Available resolution size: 720x576 (W x H) pixel DivX file extensions: “.avi”, “.divx” Playable DivX subtitle: “.smi”, “.srt”, “.sub (Micro DVD format only)”, “.
RH497D-P-BESPLLK-ENG 1/9/09 3:42 PM Page 29 Selecting multiple files or folders on the list Copying file(s) or folder(s) to the HDD You can select not only single file but also multiple files using MARKER button. Press MARKER at the desired files to select multiple files. You can copy file(s) or folder(s) to the HDD. Selecting all files and folders on the current list If you want to select all files and folders on the list, press CLEAR at any file or folder on the list.
RH497D-P-BESPLLK-ENG 1/9/09 3:42 PM Page 30 Displaying MP3/WMA file information Listening to a music ON REMOTE 1 Displays the HOME menu: HOME 2 Select a [MUSIC] option: bB 3 Selects an option that contains music: v V, ENTER 4 Selects a music from the menu: vV 5 Plays the selected music: PLAY 6 Stops the playback: STOP Press DISPLAY while the file you want to show the file information is selected. The unit shows the ID3-Tag information of the file.
RH497D-P-BESPLLK-ENG 1/9/09 3:42 PM Page 31 Rotate a photo Viewing a photo Use vV to rotate the photo while displayed in full screen.
RH497D-P-BESPLLK-ENG 1/9/09 3:42 PM Page 32 Setting a timer record Recording Follow the instruction below to record a TV channel or other source. The recording continues until the media is full, you stop the recording or the progress of recording is more than 12 hours. This unit can be programmed to record up to 16 timer recordings within a month. The clock must be set correctly before setting a timer. ON REMOTE 1 Selects a recording mode: You can select a recording mode on the SETUP menu.
RH497D-P-BESPLLK-ENG 1/9/09 3:42 PM Page 33 Canceling a timer recording Time Slip You can cancel a timer record before the timer recording actually starts. Select a timer recording that you want to cancel on the [Timer Record List] menu and press CLEAR. You can watch the title that you are currently recording to HDD with this function. After the recording is progressed over 15 seconds, press PLAY to playback the title that you are currently recoding.
RH497D-P-BESPLLK-ENG 1/9/09 3:42 PM Page 34 Using time shift function This feature allow you to pause or rewind live TV, so you do not miss a thing if you were interrupted. Press TIMESHIFT then press PAUSE/STEP while watching live broadcast before answering the phone. The timeshift function will record the broadcast of later viewing. Before using this function, make sure that the unit is in HDD mode. Editing a title Using the Title list menu,you can edit video contents.
RH497D-P-BESPLLK-ENG 1/9/09 3:42 PM Page 35 Before editing Chapter search HDD This unit offers various edit options for various disc types. Before you edit, check the disc type, and select the option available for your disc. You can select the start of a title by searching a chapter. Select a title that you want to search and press ENTER. Select [Chapter] in the [Search] option from the menu on the left of the screen, and press ENTER to display the [Chapter List] menu.
RH497D-P-BESPLLK-ENG Time search HDD 1/9/09 -RWVR 3:42 PM -RWVideo +RW Page 36 +R -R RAM You can select the start of a title by searching through the time duration. Select a title that you want to search and press ENTER. Select [Time] in the [Search] option from the menu on the left of the screen and press ENTER to display the [Search] menu. Dividing a title HDD +RW Use this function to split a title up into two titles. Select a title that you want to divide and press ENTER.
RH497D-P-BESPLLK-ENG 1/9/09 3:42 PM Page 37 Naming a title When a title is recorded by this unit, the title name will be named by a number. You can change a title name by using this function. The chapters that you want to combine are created by deleting a part from an Original title. The chapters that you want to combine are created from different titles. One of the playlist chapter that you want to combine has been moved.
RH497D-P-BESPLLK-ENG 1/9/09 3:42 PM Page 38 About ‘Fast’ copying Dubbing a title Using the title list menu, you can dub video contents.
RH497D-P-BESPLLK-ENG 1/9/09 3:42 PM Page 39 Language Codes Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.
RH497D-P-BESPLLK-ENG 1/9/09 3:42 PM Page 40 Troubleshooting General The power does not turned on. b Plug the power cord into the wall outlet securely. There is no picture. b Select the appropriate video input mode on the TV so the picture from the unit appears on the TV screen. b Connect the video connection securely. b Check the [Video Output Format] in SETUP menu is set to the appropriate item that conforms to your video connection. Picture noise appears.
RH497D-P-BESPLLK-ENG 1/9/09 3:42 PM Page 41 Recording Cannot record or does not record successfully. b Check the remaining space on the disc. b Check that the source you are trying to record in not copy protected. b The power may have failed during recording. b Use a VR mode formatted disc for copy-once material. Timer record does not record successfully. b Clock is not set to correct time. b The start time of the timer recording is past.
RH497D-P-BESPLLK-ENG 1/9/09 3:42 PM Page 42 Playback Specifications Frequency response General Power requirements Power consumption Dimensions (approx.) Net weight (approx.
RH497D-P-BESPLLK- SPA 1/9/09 3:44 PM Page 1 ESPAÑOL RHT497H/RHT498H/RHT499H Lea detenidamente el contenido de esta tarjeta de garantía. Como colaborador Energy Star®, LG ha establecido que este producto o modelos de producto, cumplen las directrices Energy Star® de rendimiento energético. ENERGY STAR® es una marca registrada de EE.UU.
RH497D-P-BESPLLK- SPA 1/9/09 3:44 PM Page 2 PRECAUCIÓN RIESGO DE DESCARGA ELÉCTRICA NO ABRIR PRECAUCIÓN: PARA REDUCIR EL RIESGO DE DESCARGA ELÉCTRICA, NO RETIRE LA CUBIERTA (O TAPA POSTERIOR) NO HAY EN EL INTERIOR NINGUNA PARTE QUE PUEDA REPARAR EL USUARIO REFIERA EL MANTENIMIENTO A PERSONAL DE MANTENIMIENTO CUALIFICADO.
RH497D-P-BESPLLK- SPA 1/9/09 3:44 PM Page 3 Copyright El equipo de grabación deberá usarse sólo para realizar copias legales y se recomienda que revise cuidadosamente qué se considera como copialegal en el país en que está haciendo dicha copia. Copiar material con Copyright como películas o música es ilegal a menos que lo permita una excepciónlegal o lo consienta el propietario de los derechos. “Este producto incorpora tecnología de protección de derechos de autor amparada mediante patentes de EE.
RH497D-P-BESPLLK- SPA 1/9/09 3:44 PM Page 4 Contenido Antes de empezar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-6 Mando a distancia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Unidad principal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Conexión de la unidad . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-14 Funcionamiento de la unidad USB Flash . . . . . . . . . . . . . . .14 Configuración automática . . . . . . . . .
RH497D-P-BESPLLK- SPA 1/9/09 3:44 PM Page 5 Antes de empezar Discos reproducibles y grabables Esta unidad puede reproducir y grabar todos los tipos de DVD más comunes. La siguiente tabla indica algunas diferencias de compatibilidad concretas dependiendo del tipo de disco.
RH497D-P-BESPLLK- SPA 1/9/09 3:44 PM Page 6 Notas sobre los discos Restricciones para realizar copias Algunos discos CD-R/RW (o DVD±R/RW) no podrán reproducirse en la unidad debido a las condiciones del equipo de grabación o a los propios discos CD-R/RW (o DVD±R/RW). No adhiera etiquetas ni adhesivos a ninguna cara (cara etiquetada o grabada) de los discos. Algunos vídeos están protegidos con la función copy-once (una sola copia). Ese tipo de material no puede copiarse al disco duro ni al DVD.
RH497D-P-BESPLLK- SPA 1/9/09 3:44 PM Page 7 Mando a distancia a POWER: apaga y enciende la unidad. RETURN (O): sale del menú de visualización en pantalla. DVD: selecciona el modo de función DVD de la unidad. a DISPLAY: accede a la visualización en pantalla. HDD: selecciona el modo de función de disco duro de la unidad. EPG: muestra la programación televisiva. OPEN/CLOSE: abre y cierra la bandeja de discos.
RH497D-P-BESPLLK- SPA 1/9/09 3:44 PM Page 8 Unidad principal a b c d e f k a 1 / I (Botón de encendido/apagado) Apaga y enciende la unidad. b Bandeja de discos Inserte aquí un disco. c DVD Ajusta el modo de la grabadora a DVD. HDD Ajusta el modo de la grabadora a HDD. v / V: busca hacia arriba o abajo en los canales memorizados. d Sensor remoto Dirija el mando a distancia hacia aquí. e Pantalla de visualización Muestra el estado actual de la unidad. T/S: indica el modo timeshift.
RH497D-P-BESPLLK- SPA 1/9/09 3:44 PM Page 9 Conexión de la unidad Antena (analógica) Antena (digital) a Conexión de la antena Conecte la antena de TV terrestre a la toma ANTENNA IN de la unidad. Si quiere utilizar una antena interior, utilice una con un amplificador de señal de 5 V y 100 mA, tras posicionar [Antena 5 V] en [ON] en el menú de configuración.
RH497D-P-BESPLLK- SPA 1/9/09 3:44 PM Page 10 Conexión de la unidad: qué más puede hacer Información general sobre la conexión Imagen y sonido La televisión digital es una tecnología de transmisión que reemplaza a la tecnología analógica tradicional. Esto implica que varios canales de televisión, radio y otros servicios digitales se pueden transferir en el mismo espacio del mismo modo que antes se seleccionó un solo canal.
RH497D-P-BESPLLK- SPA 1/9/09 3:44 PM Page 11 Conexión S-Vídeo Conexión de audio digital Conecte un extremo del cable S-Vídeo a la toma S-VIDEO OUTPUT en la unidad y el otro extremo a la toma S-VIDEO INPUT de su TV. Conecte un extremo de los cables de audio (rojo y blanco) a la toma AUDIO OUTPUT analógica de la unidad y el otro extremo a la toma AUDIO INPUT de su TV. Conexión a un receptor/amplificador, descodificador Dolby Digital/MPEG/DTS u otro equipo con una entrada digital.
RH497D-P-BESPLLK- SPA 1/9/09 3:44 PM Page 12 Conexión HDMI Si su TV no está equipado con un descodificador de DTS, configure las opciones [DTS] a [OFF] en el menú de configuración (consulte la página 19). Para disfrutar del sonido envolvente multicanal DTS, debe conectar esta unidad a un receptor compatible con DTS mediante una de las salidas de audio digital de la unidad. Si hay ruido o aparecen líneas en pantalla, compruebe el cable HDMI.
RH497D-P-BESPLLK- SPA 1/9/09 3:44 PM Page 13 Conexión de un decodificador de Canal Plus/TV de pago Puede visualizar o grabar programas de Canal Plus/TV de pago si conecta un decodificador (no suministrado) a la unidad. Desconecte los cables principales de la unidad de la toma de corriente al conectar el decodificador. No necesita encender la unidad para visualizar las señales desde el sintonizador conectado en su TV.
RH497D-P-BESPLLK- SPA 1/9/09 3:44 PM Page 14 Conexión a las tomas AV IN 3 Funcionamiento de la unidad USB Flash Conecte las tomas de entrada (AV IN 3) de la unidad a las tomas de salida de audio/vídeo de su equipo adicional usando cables de audio/vídeo. Panel de tomas de equipo adicional (VCR, videocámara, etc.
RH497D-P-BESPLLK- SPA 1/9/09 3:44 PM Page 15 Configuración automática La primera vez que encienda la unidad, el asistente de configuración inicial ajusta el idioma, el reloj y los canales de forma automática. 1 Encienda la unidad: en la pantalla aparece el asistente de configuración inicial.
RH497D-P-BESPLLK- SPA 1/9/09 3:44 PM Page 16 Cambio de la lista de programas en la pantalla de edición de canal Puede alternar en la lista de programas en la pantalla de edición de canal. Uso del menú de inicio, HOME EN EL MANDO A DISTANCIA Pulse v V para mover la posición resaltada a la parte superior de la lista de programas. Pulse b B para seleccionar [DIGITAL TV], [ANALOG TV] o [RADIO], después pulse v V para seleccionar un programa de la lista.
RH497D-P-BESPLLK- SPA 1/9/09 3:44 PM Page 17 FOTO HDD – muestra el menú [lista de fotos], que incluye los archivos de imágenes en el disco duro. (Página 31). DISCO – muestra el menú [lista de fotos], que incluye los archivos de imágenes en el disco. (Página 31). USB – muestra el menú [lista de fotos], que incluye los archivos de imágenes en la unidad USB Flash. (Página 31). MÚSICA HDD – muestra el menú [Liste de musiques], que incluye los archivos de música en el disco duro. (Página 30).
RH497D-P-BESPLLK- SPA 1/9/09 3:44 PM Page 18 Ajuste de los valores SETUP: qué más puede hacer Ajuste de los valores generales Tamaño de la pantalla – selecciona la relación de aspecto del TV conectado. [4:3 Caja de cartas]: seleccione esta opción cuando conecte un TV de pantalla estándar con resolución 4:3 y prefiera una imagen panorámica con bandas en la parte superior e inferior de la pantalla.
RH497D-P-BESPLLK- SPA 1/9/09 3:44 PM Page 19 Ajuste de los valores de idioma Ajuste de los valores de audio Display Menú – selecciona un idioma para el menú de configuración y mensajes en pantalla. Dolby Digital / DTS / MPEG – selecciona el tipo de señal de audio digital cuando utilice una toma DIGITAL AUDIO OUTPUT. Disco Menú/Audio/Subtítulo – seleccione un idioma para menú/audio/ subtítulos. [Original]: hace referencia al idioma original en que se grabó el disco.
RH497D-P-BESPLLK- SPA 1/9/09 3:44 PM Page 20 Ajuste de los valores de bloqueo Código de área – selecciona un código para un área geográfica como el nivel de clasificación de reproducción. Determina qué estándares de país se utilizan para clasificar DVDs controlados por el control paterno. Consulte los códigos de país en la página 42. Cód reg. DivX – le proporcionamos el código de registro de DivX® VOD (Video On Demand) que le permitirá alquilar y comprar vídeos usando el servicio DivX® VOD.
RH497D-P-BESPLLK- SPA 1/9/09 3:44 PM Page 21 TV Rec Audio – seleccione un canal de audio para grabar un programa bilingüe. [Princ.+Sub]: idioma principal y subidioma [Princ.]: sólo idioma principal [Sub]: sólo subidioma Auto Capítulo – en la grabación de DVD, los marcadores de canal se agregan automáticamente en cada intervalo especificado (5, 10 ó 15 min.). GRABACION AV2 – selecciona un método de grabación de entrada de señales de vídeo para la toma AV2(DECODER).
RH497D-P-BESPLLK- SPA 1/9/09 3:44 PM Page 22 Ajuste de la configuración de red Actualización S/W – Su grabadora permite que el sintonizador digital incorporado esté al día incluyendo el último software. Podrá revisar las actualizaciones de forma manual o dejar que la unidad lo haga automáticamente con regularidad. Mientras la unidad se está actualizando, la recepción debe interrumpirse durante algunas horas. La recepción volverá a la normalidad tras completar la actualización.
RH497D-P-BESPLLK- SPA 1/9/09 3:44 PM Page 23 Visualización de la información del disco EN EL MANDO A DISTANCIA 1 Reproduzca el disco insertado en la unidad: PLAY 2 Visualice el estado actual de la reproducción: DISPLAY 3 Visualice el menú de reproducción: DISPLAY 4 Seleccione un elemento: vV 5 Ajuste los valores del menú de reproducción: bB 6 Salga del menú de reproducción del disco: DISPLAY Visualización de la información del disco: qué más puede hacer Ajuste de elementos del menú de reprod
RH497D-P-BESPLLK- SPA 1/9/09 3:44 PM Page 24 Visualización de información mientras ve la televisión Cambio de programa de televisión Mientras ve la TV, pulse DISPLAY para visualizar la información que aparece en pantalla. Utilice PR+/PR- en el mando a distancia para cambiar los programas de la memoria o bien, utilice los botones numéricos (1 a 9) para seleccionar el programa directamente.
RH497D-P-BESPLLK- SPA 1/9/09 3:44 PM Page 25 Selección en el menú EPG Uso de EPG digital EN EL MANDO A DISTANCIA 1 Muestra el menú EPG: La pantalla EPG ofrece dos menús de búsqueda. Pulse el botón de color azul cuando se visualice el menú EPG. Ahora/Sigte: la pantalla muestra los programas actuales y los siguientes. EPG 2 Permite seleccionar un programa de televisión: vV 3 Muestra la lista de menú siguiente/anterior: .
RH497D-P-BESPLLK- SPA 1/9/09 3:44 PM Page 26 Visualización del servicio de teletexto El teletexto es un servicio de emisión gratuito en algunos canales de televisión que le ofrece información actualizada sobre noticias, información meteorológica, programación televisiva, precios sobre acciones y otros temas de interés. La grabadora le permite acceder al teletexto, que en gran medida está relacionado con varios aspectos como texto y gráficos.
RH497D-P-BESPLLK- SPA 1/9/09 3:44 PM Page 27 Para pausar la reproducción Repetición de la reproducción HDD Pulse PAUSE/STEP (X) para pausar la reproducción. Pulse PLAY (N) para continuar la reproducción. Pulse REPEAT varias veces para seleccionar el elemento que desea repetir. El título, capítulo, carpeta o pista actual se reproducirá de forma repetida. Para volver a la reproducción normal, pulse REPEAT varias veces para seleccionar [Off].
RH497D-P-BESPLLK- SPA 1/9/09 3:44 PM Page 28 Reproducción de archivos de película DivX® EN EL MANDO A DISTANCIA 1 Visualice el menú HOME: HOME 2 Seleccione una opción de [PELÍCULA]: bB 3 Seleccione una opción que contenga archivos DivX: v V, ENTER 4 Seleccione un archivo de película desde el menú: vV 5 Reproduzca el archivo de película seleccionado: PLAY 6 Detenga la reproducción: STOP Reproducción de un archivo de película DivX - qué más puede hacer Opciones del menú “lista de películas” Se
RH497D-P-BESPLLK- SPA 1/9/09 3:44 PM Page 29 Para seleccionar múltiples archivos o carpetas en la lista Para copiar archivo(s) o carpeta(s) al disco duro Puede seleccionar no sólo un único archivo sino múltiples archivos con el botón MARKER. Pulse MARKER en los archivos que desee para seleccionar múltiples archivos. Puede copiar archivo(s) o carpeta(s) al disco duro.
RH497D-P-BESPLLK- SPA 1/9/09 3:44 PM Page 30 Para visualizar la información del archivo MP3/WMA Cómo escuchar música EN EL MANDO A DISTANCIA 1 Visualice el menú HOME: HOME 2 Seleccione una opción de [MÚSICA]: bB 3 Seleccione una opción que contenga música: v V, ENTER 4 Seleccione un archivo musical del menú: vV 5 Reproduzca la música seleccionada: PLAY 6 Detenga la reproducción: STOP Cómo escuchar música - qué más puede hacer Opciones del menú “Lista de música” Seleccione el archivo/pista q
RH497D-P-BESPLLK- SPA 1/9/09 3:44 PM Page 31 Cómo visualizar archivos de imágenes como una presentación Visualización de una imagen EN EL MANDO A DISTANCIA 1 Visualice el menú HOME: HOME 2 Seleccione una opción de [FOTO]: bB 3 Seleccione una opción que contenga archivos de imágenes: v V, ENTER 4 Seleccione una imagen de la lista: vVbB Para visualizar imágenes de la [lista de fotos] como una presentación, seleccione la opción [Slide Show] en la parte izquierda de la pantalla y, a continuación, p
RH497D-P-BESPLLK- SPA 1/9/09 3:44 PM Page 32 Ajuste de la grabación con temporizador Grabación Siga las siguientes instrucciones para grabar un canal de TV u otra fuente. La grabación continúa hasta que el soporte está lleno, se detiene la grabación o el progreso de la grabación supera las 12 horas. EN EL MANDO A DISTANCIA 1 Seleccione un modo de grabación: Puede seleccionar un modo de grabación en el menú SETUP.
RH497D-P-BESPLLK- SPA 1/9/09 3:44 PM Page 33 Cancelación de una grabación con temporizador Time Slip Puede cancelar una grabación temporizada antes de que comience a grabar. Seleccione una grabación con temporizador que desee cancelar en el menú [Lista de gb. Resv.] y pulse CLEAR. Puede visualizar el título que está grabando en ese momento en el disco duro con esta función. Transcurridos 15 segundos de la grabación, pulse PLAY para reproducir el título que está grabando.
RH497D-P-BESPLLK- SPA 1/9/09 3:44 PM Page 34 Utilización de la función Time shift Esta función le permite pausar o rebobinar TV en directo, de modo que no perderá nada si se producen interrupciones. Presione TIMESHIFT y, a continuación, presione PAUSE/STEP mientras disfruta de una emisión en directo. La función Timeshift grabará la transmisión a partir de ese momento. Antes de utilizar esta función, asegúrese de que la unidad esté en modo HDD.
RH497D-P-BESPLLK- SPA 1/9/09 3:44 PM Page 35 Antes de editar Búsqueda de capítulo Esta unidad ofrece varios tipos de opciones de edición para varios tipos de discos. Antes de editar, compruebe el tipo de disco y seleccione la opción disponible para su disco. Puede disfrutar de unas funciones avanzadas de edición con DVD formateado en modo VR (DVD-RW o DVD-RAM).
RH497D-P-BESPLLK- SPA 1/9/09 3:44 PM Page 36 Búsqueda por tiempo HDD -RWVR -RWVideo División de un título HDD +RW +R -R RAM Puede seleccionar el inicio de un título buscando a través de la duración de tiempo. Seleccione un título que desee buscar y pulse ENTER. Seleccione [Hora] en la opción [Buscar] del menú en la parte izquierda de la pantalla y, a continuación, pulse ENTER para visualizar el menú [Buscar]. Proteger un título -RWVR Utilice b B para buscar el tiempo en que desea iniciar.
RH497D-P-BESPLLK- SPA 1/9/09 3:44 PM Page 37 Nombrar un título Cuando se graba un título con esta unidad, el nombre del título recibirá el nombre de un número. Puede cambiar el nombre de un título si utiliza esta función. Si sólo hay un capítulo en el título. Si se selecciona el primer capítulo. Los capítulos que desea combinar se crean borrando una parte de un título Original. Los capítulos que desea combinar se crean desde diferentes títulos.
RH497D-P-BESPLLK- SPA 1/9/09 3:44 PM Page 38 Acerca del copiado “Rápido” Copia de un título Usando el menú Title List, puede copiar los contenidos del vídeo.
RH497D-P-BESPLLK- SPA 1/9/09 3:44 PM Page 39 Códigos de idioma Utilice esta lista para introducir el idioma deseado según los ajustes iniciales siguientes: Disco Audio, Disco Subtítulo, Disco Menú.
RH497D-P-BESPLLK- SPA 1/9/09 3:44 PM Page 40 Solución de problemas General La unidad no se enciende. b Conecte firmemente el cable de alimentación a la toma de la pared. No hay imagen. b Seleccione el modo de entrada de vídeo apropiado en el televisor para que la imagen de la unidad aparezca en la pantalla del televisor. b Conecte firmemente la conexión de vídeo. b Compruebe si [Salida formato video] en el menú SETUP está ajustado en el elemento adecuado según su conexión de vídeo.
RH497D-P-BESPLLK- SPA 1/9/09 3:44 PM Page 41 Grabación No se puede grabar o no se graba con éxito. b Compruebe el espacio restante del disco. b Compruebe que la fuente que intenta grabar no está protegida contra copia. b La alimentación podría haber fallado durante la grabación. b Utilice un disco formateado en modo VR para material de un solo copiado. La grabación con temporizador no graba correctamente. b El reloj no está ajustado en la hora correcta.
RH497D-P-BESPLLK- SPA 1/9/09 3:44 PM Page 42 Especificaciones General Requisitos de alimentación 200-240 V CA, 50/60 Hz Consumo 30 W Dimensiones (aprox.) 430 x 49 x 275 mm (An. x Al. x Pr.) sin base Peso neto (aprox.) 4 kg Temperatura de funcionamiento 5°C a 35°C Humedad de funcionamiento 5% a 65% Sistema de TV Analógico: sistema de color PAL I, B/G, I/I, SECAM D/K, K1 Digital: compatibilidad estándar DVB-T.