Owner's Manual

19
Installation Instructions
Provide
proper
ventilation for this
projector.
The
projector
is
equipped
with ventilation
holes(intake)
on the bottom and ventilation
holes(exhaust)
on the front. do not block or
place anything
near these
holes,
or internal
heat
build-up may
occur,
causing picture
degradation
or
damage
to the
projector.
Use and
keep
this
projector
in
suitable
temperature
and
humidity
conditions.
Install this
projector only
in
a location where
adequate temperature
and
humidity
are controlled.
(refer p.62)
Do not
place
the
projector
on a
carpet, rug
or other similar surface. It
may prevent
adequate
ventilation to the
projector
bottom. This
product
should be mounted
securely
to a suitable bracket or stand.
*
Don't
place
the
projector
in the
following
conditions. It
may
cause malfunction or
product damage.
Avoid
impact
to the
projector.
Do not
spill liquid
of
any
kind into the
projector.
Leave an
adequate distance(30cm
or
more)
around the
projector.
Don't
place
the
projector
where it can be covered with dust.
This
may
cause
overheating
of the
projector.
Clean the
Air
filter
periodically.
R
NT
ER
AEN
POWER
VOL
PATTERN
POWER
R
SOURCE
ENTER
PATTERN
P
WER
VOL
VOL
R
SOURCE
EN T
ER
PATTERN
POWER
VOL
VOL
R
SOURCE
ENTER
P
POWER
VOL
VOL
R
SOURCE
ENTER
ATERN
POWER
VOL
VOL