PLASMATV MODELS: RU-42PX10/10C/10H/11/11C/11H RU-50PX10/10C/10H/11/110/11 read this manual carefully and completely H before for future reference.
Waming/Caution arning/Caut • iiLJ_......... i on WARNING/CAUTION WARNING/CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead the presence of uninsulated symbol, within an equilateral triangle, is intended to alert the user to "dangerous voltage" within the product's enclosure that may be of suffi- cient magnitude to constitute a risk of electric shock to persons.
Safety Instructions !nstruc|i, ons f IMPORTANT SAFETY INSTRUCTIONS important safety instructions shall be provided with each apparatus. This information shall be given in a separate booklet or sheet, or be located before any operating instructions ratus. in an instruction This information to the country where the apparatus is intended to be used.
Safety Instructions Instructions 13. Unplug this apparatus contin ued during lightning storms or when 14. Refer all servicing to qualified service personnel. in any way, such as power-supply the apparatus, 15. CAUTION concerning Most appliances additional or branch circuits. Check has been damaged have fallen into or has been dropped. circuit; that powers only that appliance and has no the specification page of manual to be certain. Do not overload wall outlets.
Introduction Contents Warning/Caution ................................ Safety instructions ............................. 2 3-4 On/Off Timer Setup ..................... Sleep Timer / Auto Off .................... Special Menu Features Key Lock ............................. ISM (image Sticking Minimization) Method Low Power ............................ XD Demo ............................. introduction Controls ............................... 7 Connection Options ......................
Introduction ntroduc|ion What is a Plasma Display Panel (PDP)? A plasma display panel isthe latest display technology. It is currently the best way to achieve flat panel displays with excellent image quality and large screen sizes, that are easily viewable. The PDP can be thought of as a descendant of the neon lamp and it can be also be viewed as a series of fluorescent lamps.
Introduction - This is a simplified representation of front panel. Here shown may be somewhat different from your TV. - This manual explains the features available on the RU-42PX10 series TVs. ON/OFF Button Remote Control MENU Button Sensor TV/VIDEO Button CHANNEL VOLUME (T, A) Buttons (41,_) Buttons Power Standby Indicator Illuminates red in standby mode, Illuminates green when the TV is turned on.
Introduction Con nection Opt ions S-VIDEO input picture quality than the video input. VIDEO input Connects the video signal from a video device. AUDIO Input Use to connect to hear stereo sound from an external device. Monitor Output Connect a second TV or Monitor. DVD/DTV input (Component 1-2) Connect a component video/audio device to these jacks. Remote Control Port S-Video Input Connect S-Video out from an S-VIDEO device to the S-VIDEO input. Connect your wired remote control here.
Introduction Co n t r o I K e y F Un Ct i On S - When using the remote control, aim it at the remote control sensor on the TV. MUTE _ Switches the sound on or off. POWER Turns your TV on or off. TVVIDEO Selects: TV, Video 1-2, Component 1-2, RGB, and DVI input sources. MTS Selects the MTS sound: Mono, Stereo, or SAP. MULTIMEDIA Selects: Component 1-2, RGB, and MENU DVI input sources._ CAPTION Selects CAPTION mode. Brings up the main menu to the screen. ARC Changes the picture format.
Installation !nstaL!ation Installation Instructions The TV can be installed in various ways such as on a wall, or on a desktop etc. The TV is designed to be mounted horizontally. The speakers shown are optional. It is recommended that RU-42/50PX10/10C/11/11C model only be used at an altitude of less than 3281 feet (lO00m) to get the best quality picture and sound.
Installation Eq Ui p m e nt: C o n n ect i o n s Antenna or Cable Service without a Cable Box Connections For optimum picture quality, adjust antenna direction if needed. f Multi-family Dwellings/Apartments (Connect to wall antenna socket) J¢i_ _ wall _j_-_ J antenna socket _J_ Bronze Wire I RF coaxial wire (75 ohm) I I i VHF antenna UHF antenna _ ....... J Turn clockwise to tighten. ? outdoor antenna Bronze Wire Be careful not to bend the bronze wire when connecting the antenna.
Installation NOTE: All cables shown are not included with the TV - To avoid picture noise (interference), leave an adequate distance between the VCR and TV Use the ISM Method (on the Option menu) feature to avoid having a fixed image remain on the screen for a long period of time. Typically a frozen still picture from a VCR. If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen.
Installation HOW tO connect Connect the audio and video cables from the external equipment's output jacks to the TV input jacks, as shown in the figure. When connecting the TV to external equipment, match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red). HOW tO use 1. Select the input source by using the TV/VIDEO button on the remote control. (If connected to A!V INPUT 1, select Video 1 input source). 2. Operate the corresponding external equipment.
Installation - To watch digitally broadcast programs, purchase and connect a digital set-top box. or or Digital Set-top Box How to connect Use the TV's COMPONENT (Y, PB, PR) INPUT jacks, RGB or DVl port for video connections, depending on your set-top box connections available. Then, make the corresponding audio connections. HOW tO USe Signal 480i 1. Turn on the digital set-top box. (Refer to the owner's manual for the digital set-top box.) 2.
Operation HOW to connect 1. To get the best picture quality, adjust the PC graphics card to 640x 480, 60Hz. 2. Use the TV's RGB INPUT or DVl (Digital Visual Interface) INPUT port for video connections, depending on your PC connector. . If the graphic card on the PC does not output analog and digital RGB simultaneously, connect only one of either RGB INPUT or DVl INPUT to display the PC on the TV. .
Operation Operation Turning the TV On * in this manual, the OSD (On Screen Display) may be different from your TV's because it is just an example to help you with the TV operation. 1. Connect power cord correctly. 2. Press the O ON/OFF button on the TV. At this moment, the TV is switched to standby mode. Press the TV/VIDEO, OH (A / T) button on the TV or press the POWER, TV/VIDEO, MULTiMEDiA, Number (0 ~ 9) button on the remote control and then the TV will turn on. 1.
Operation M e n u 0 p t i0 n S Auto Program should be used to memorize all the active channels in your area before you are able to use the TV. There are two ways of storing channels in the TV's memory. You can use either. One is called AUTO PROGRAM and the other is called MANUAL PROGRAM. In AUTO PROGRAM mode, the TV will memorize the channels in ascending numerical order. If there are additional want to add or delete, you can manually add or delete those channels with Manual Program.
Operation C h a n ne I M e n u 0 p t io ns c o n t in u e d - If TV signal reception is poor because you are in a fringe area, set Booster to On. If the picture condition is good, set Booster to Off. - Adjustments for one channel don't affect the adjustment for other channels. Set booster to on or off for each channel separately. 1. Press the MENU button and then use A/T 2. Press the _ button to select the CHANNEL button and then use A / T button to select Manual menu. program. 3.
Operation Picture Menu Opt:ions - APC adjusts the TV to the best picture appearance. - If adjusting picture options (contrast, brightness, color, sharpness, changes to Off. or tint) manually, APC automatically 1. Press the APe button repeatedly to select the picture appearance setup option as shown below. , You can also adjust APC in the PICTURE menu. , Daylight, Optimum, and Night time settings are preset for good picture quality at the factory and cannot be changed.
Operation Picture Menu Options continued Use Fleshtone to select the desired skin color option. 1. Press the MENU button and then use _,/T button to select the PICTURE menu. 2. Press the I_ button and then use A / T button to select Fleshtone. 3. Press the _ button and then use ",_/ _ button to make appropriate , The adjustment adjustments. range is 0 - 3. 4. Press the ENTER button to save. If the TV is connected to external equipment adjust for the color difference. 1.
Operation So u nd M e n u 0 pt io ns - This function lets you enjoy the best sound without any special adjustment because the TV has the appropriate sound options based on the program content. If you adjust sound options (Treble and Bass) manually, DASP automatically changes to Off. 1. Press the DASP button repeatedly [__D=_[SRSTSXTI._._._._.._[ F,a, to select the appropriate sound setup as shown below. I____.._[ Music I___.
Operation Sound Menu Options continued - You can adjust sound options Balance, Treble, and Bass to the levels you prefer. 1. Press the MENU button and then use _, / _" button to select the SOUND menu. 2. Press the _" button and then use _, / _" button to select the desired sound option (Balance, Treble, Bass). 3. Press the _ button and then use ",_/ _ button to make appropriate adjustments. 4. Press the ENTER button to save.
Operation Ti met Menu Opt ions Set the time automatically through the PBS broadcast signal. ThePBS channel signal includes information for the current time. Set the clock manually, if the current time is set incorrectly programed by the auto clock function. 1. Press the MENU button and then use A / T button to select the TIMER menu. 2. Press the I_ button and then use A / _" button to select Clock. 3. Press the I_ button and then use A / _" button to select Auto. 4.
Operation Ti m e r Me n u 0 Pt io n s co n t in ued - The Sleep -Iqmer turns the TV off at the preset time. Note that this setting is cleared when the TV is turned off. 1. Press the SLEEP button repeatedly to select the number of preset minutes. First the _zz _n option appears on the screen, followed by the following sleep timer turn off times: 10, 20, 30, 60, 90, 120, 180, and 240 minutes. 2. When the number of minutes you want is displayed on the screen, press the ENTER button.
Operation M e n u Opti o ns The TV can be set up so that it can only be used with the remote control. This feature can be used to prevent unauthorized viewing by locking out the front panel controls. This TV is programmed to remember which option it was last set to even if you turn the TV off. 1. Press the MENU button and then use A / T button to select the SPECIAl, menu. 2. Press the I_ button and then use A / _' button to select Key lock. 3.
Operation Special Menu Options continued - Low power reduces the plasma display power consumption. 1. Press the MENU button and then use _,/T button to select the SPECIAL menu. 2. Press the 1_ button and then use _, / V button to select Low power. 3. Press the _ button and then use _, / V button to select On or Off. . When you select On, the screen darkens. 4. Press the ENTER button to save. - Use it to see the difference between XD Demo on and XD Demo off. 1.
Operation Closed Captions Closed captioning is a process which converts the audio portion of a television program into written words which then appear as subtitles on the television screen. Closed captions allow viewers to read the dialogue and narration of television programs. 1. Poor reception conditions are encountered: • iGNiTiON: Picture may flutter, drift, suffer from black spots, or horizontal streaking.
Operation Me nu 0 pt ions RGB (PC) mode only; This function doesn't work for RGB-DTV mode. - Automatically adjusts picture position and minimizes image shaking. - After adjustment, if the image is still not correct, your TV is functioning properly but needs further adjustment. - The Auto con|ig, and Manual con|ig, are not active in DVl mode. 1. Press the MENU button and then use _, / T button to select the SCREEN menu. 2. Press the _ button and then use _, / _" button to select Auto con|ig.. 3.
Operation If the image still isn't clear after auto adjustment still jittery, adjust the picture Phase manually. - To correct the screen size, adjust Clock. and especially if characters are 1. Press the MENU button and then use A / T button to select the SCREEN menu. 2. Press the I_ button and then use A / _" button to select Manual config.. 3. Press the I_ button and then use A / _' button to to select Phase 4. Use the 4/1_ or Clock. button to make appropriate adjustments.
Operation Screen Menu Options continued - Use YNR to reduce the picture noise that may appear on the screen. 1. Press the MENU button and then use _, / T button to select the SCREEN menu. 2. Press the _ button and then use _, / _" button to select YNR. 3. Press the _ button and then use _, / _" button to select On or Off. 4. Press the ENTER button to save. Reset is unique to each function: Manual config., Position, Split zoom, PIP position and sub picture size for double window.
Operation Lo c k M e n u Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broadcasting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by the type of program and by the categories chosen to be blocked. It is also possible to block all program viewing for a time period.
Operation PiP (Pier ure-ln-Piet ure)/Double Window Feature - PIP lets you view 2 different inputs pictures (sources) on your TV screen at the same time. One source will be large, and the other source will show a smaller inset image. - Double Window mode splits the screen into 2, allowing 2 picture sources to be shown on the TV screen at the same time. Each source is given half the screen. Press the PIP/DW button to access the sub picture. Each press of PIP changes the PIP options as shown below.
External Control Device Setup Control Device Setup Connect the RS-232C input jack to an external control device (such as a computer or an AN control system) and control the Monitor's functions externally. Connect the serial port of the control device to the RS-232C jack on the Monitor back panel. RS-232C connection cables are not supplied with the Monitor. PC 1 No.
External Control Device Setup - Use this function to specify a monitor ID number. - Refer to 'Real Data Mapping 1'. See page 35. 1. Press the MENU button and then use A/T button to select the SPECIAl, menu. 2. Press the I_ button and then use A / _" button to select Set ID. 3. Press the I_ button and then use 4 / 1_ button to adjust Set ID to choose the desired monitor ID number. The adjustment range of Set ID is 1 - 99. 4. Press the ENTER button to save. .
External Control Device Setup 05. Volume Mute (Command2:e) 01. Power (Command2:a) To control Power On/Off of the TV. I_ To control volume mute on/off. You can also adjust mute using the MUTE button on remote control. Transmission Transmission [[k][a][ Data ][Set ID][ ][Data][Cr] i 0 • Power Off 1 • Power On I[k][e][ Acknowledgement Data i[a][ ][Set ID][ ][OK][Data][x] Acknowledgement I[e][ ][Set ID][ ][OK][Data][x] 06. Volume 02.
External Control Device Setup 09. Color (Command2:i) 14. PIP / DW To adjust the screen color. You can also adjust color in the Picture menu. (Command2:n) To control the PIP (Picture In picture)/DW (Double Window). You can also control the PIP/DW using the PIP/DW button on the remote control or in the PIP/DW menu. Transmission Transmission [[k][i][ Data ][Set IU][ ][Uata][Cr] Min:O-Max:64 1 I[k][n][ ][Set IU][ ][Uata][Cr] Data O: PIP/DW off 1: PIP ® Refer to 'Real data mapping 1 '. See page 35.
External Control Device Setup 18. Bass (Command2:s) 23. Blue To adjust bass. You can also adjust bass in the Sound menu. Adjustment (Command2:$) To adjust blue in color temperature. Transmission Transmission i[k][s][ Data ][Set IU][ ][Uata][Cr] i Min: 0 - Max: 64 ® Refer to 'Real data mapping 1 '. See page 35. Acknowledgement i[s][ i[k][$][ ][Set IU][ ][Uata][Cr] Data Min: 0 _ Max: 3C ® Refer to 'Real data mapping 3' as shown below.
External Control Device Setup 26. ISM Method (Command2:p) 31. Auto Configure (Command2:u) To avoid having a fixed image remain on screen. I_ To adjust picture position and minimize image shaking automatically. It works only in RGB (PC) mode.
IR Codes IR Cod es Connect your wired remote control to the Remote Control port on the Monitor. Output waveform Single pulse, modulated with 37.917KHz signal at 455KHz Tc Carrier frequency m_--]mjm[m FOAR= lfrc = fOSC/12 Duty ratio = T1/Tc = 1/3 I-,.
IRCodes Code(Hexa) OO 01 02 03 08 C4 C5 09 10 11 12 13 14 15 16 17 18 19 OB 98 D6 5A DO BF D4 C6 D5 OE 43 44 4D 52 60 61 63 64 62 71 72 7B 79 76 77 AF 1E 1A 54 55 0A 39 99 40 Plasma TV Function CH (_,) CH (_') VOL (_) VOL (4) POWER POWER ON POWER OFF MUTE Number Key 0 Number Key 1 Number Key 2 Number Key 3 Number Key 4 Number Key 5 Number Key 6 Number Key 7 Number Key 8 Number Key 9 TV/VlDEO MULTIMEDIA TV VIDE01 VIDE02 COMPONENT1 COMPONENT2 DVl RGB SLEEP MENU ENTER APC DASP PIP/DW PIP INPUT SWAP WIN.
Troubleshooting Checklist Tr ou bIes hoot in g C hec k Iist iiii !i if' i¸! i .o p_ct°ro , Check whether the TV is turned on. , Is the power cord inserted into wall power outlet? • Test the wall power outlet, plug another product's power cord into the outlet .o,ou. where the TV's power cord was plugged in. • Press the VOLUME No sound _i_i i_ i ii _i i i_i ii doesn | / . Sound muted? Press MUTE button.
Maintenance &Specification ...................... 8i n|:enance - Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have your new TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning. 1. Here's a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent.
Your LG Plasma proves TV will be repaired to be defective in material listed below, effective ranty is good only to the original ing Alaska, Hawaii, from PERIOD: LABOR PARTS: and model the date or factory Replacement remaining from the terms use, during of original of the product of Purchase.
THIS LIMITED ® damage WARRANTY caused ® service including or transit as a result of improper incorrect the NOT APPLY in shipping required consult DOES or insufficient owner's manual gence, installation, AC supply for TO: power (please ited verters, repair cable other company caused ® damage caused ® any panel into that any other equipment, con- or or system on the due to INTERACTIVE obtain water or our include power or to acts control.
