User Manual

External Control Device Setup
External Control Device Setup
- Connect the RS-232C input jack to an external control device (such as a computer or an AN control system)
and control the Monitor’s functions externally.
- Connect the serial port of the control device to the RS-232C jack on the Monitor back panel.
- RS-232C connection cables are not supplied with the Monitor.
RS-232C Setup
(T) C - ) 0 )
(Tl O
o o
QPr.-)
OQr.-) (■■■
0
tat-"'. , ..PL*»-,
..J .... ..^
1
lirliMlI o a o
o □
o o
o o
,i< •»
0 a oEiSa
O O O ■ ..
■V '
, ..-1
0
HI"
III |:i
PC
Type of Corirtector; D-Sub 9-Pin Male
No. Pin name
1 No connection
2 RXD (Receive data)
3 TXD (Transmit data)
4 DTR (DTE side ready)
5 GND
6 DSR (DCE side ready)
7 RTS (Ready to send)
8 CTS (Clear to send)
9 No Connection
FiS-232C Configurations
RXD
TXD
GND
DTR
DSR
RTS
CTS
7-Wire Configurations
(Standard RS-232C cable)
PC PDP
TXD
RXD
GND
DSR
DTR
CTS
RTS
RXD
TXD
GND
DTR
DSR
RTS
CTS
3-Wire Configurations
(Not standard)
PC PDP
TXD
RXD
GND
DTR
DSR
RTS
CTS
D-Sub9
D-Sub9
D-Sub9
D-Sub9
Owner’s Manual 33