LCD Colour Television OWNER'S MANUAL BZ03 Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back mation to your dealer when you Model number : Serial number : P/NO : 3828TUL295J Printed in Korea cover and quote this inforrequire service.
Contents Installation 3 Location and function of controls 4 Remote control handset installation / Side Battery panel Basic 9 operation Programme selection Volume adjustment / Quick view On and off / Mute function On On screen language selection (option) 10 screen menus Menu selection up TV stations Auto programme tuning Manual programme tuning 11 Setting Programme edit Favourite programme Calling the programme table Picture 16 adjustment PSM (Picture Status Picture adjustment Pictur
Installation Power - This set operates on an AC mains supply, the voltage is as indicated on the label on the back cover. Never apply DC power to the set. In the event of thunderstorms or powercuts, please pull out the aerial and mains plugs. a. Open the back panel cover. b. After connecting the power cord to the set, connect the power cord to an AC mains. c. Fix cables with the supplyed cable tie after arranging connected cables. d. Pull the cables through the hole on the set. e.
Location and function of controls All the functions can be controlled with the remote control handset. Some functions can also be panel of the set. Only with the buttons adjusted the remote control handset on supplied the side will oper- ate this set. Remote control handset 10 MUTE POWER 1 11 TV/AV MULTIMEDIA I/II Before you use the remote control handset, teries. See the next page. 1. 12 2 LIST MUTE switches the sound 13 2. clears the OK VOL or 3. VOL 4. 5.
Location and function of controls 11. POWER switches the set on from standby or off to standby. 12. I/II selects the language during dual language output (option). broadcast. selects the sound 13. MENU selects a menu. (Picture Status Memory) recalls your preferred picture setting. are * : I/II 12 2 LIST used for teletext. see TV/AV 11 15. TELETEXT BUTTONS For further details, POWER 1 14. PSM These buttons MUTE 13 3 the 'Teletext' section.
Location and function of controls * : The mark consists of blank RZ-23/26/27/30/32LZ50 or alphabet.
Location and function of controls Side RZ-20LA70 panel *** 7 PR VOL 6 OK 9 R 5 MENU TV/AV 4 3 1 /ION/F 10 RZ-20LA66 8 *** 7 PR 6 VOL 5 OK 4 MENU TV 3 AV 9 1 /I ON/OFF 8 10 RZ-23LZ41 *** 7 PR 6 VOL 5 OK 4 2 MENU 9 R TV AV/PC 1 /I ON/OFF 8 10 RZ-20LZ50 *** PR VO L OK MENU 7 6 5 4 TV AV /I ON O 3 1 89 10 RZ-20LA90 *** PR VOL OK MENU TV/AV R 9 ON/OF /I 7 6 5 4 3 1 8 10 7
Location and function of controls RZ-17LZ40 Top panel *** ON/OFF TV/AV/PC MENU OK VOL 1 2 4 5 6 PR 7 9 R 8 10 1. ON/OFF( 6. /I) switches the set on from standby or off to standby. 2. 7. TV/AV/PC 3. clears the or a programme or a menu item. switches the set on from standby. 8. REMOTE CONTROL SENSOR from the 9. POWER/STANDBY INDICATOR on from illuminates red in screen. on. 10. Stand a menu. OK accepts your selection mode. or displays standby ( ) mode.
Basic operation On and off 1. Press the POWER, D / E TV/AV, MULTIMEDIA NUMBER buttons to switch it on fully. 2. Press the POWER button. The set reverts to 3. Pull out mains , Note MUTE POWER If, while the : is set is switched on, the mains standby or on power in the mains power socket. replaced standby or mode. to switch the set off. nected the set will switch to plug TV/AV MULTIMEDIA plugs (option) plug is discon- when the mains I/II Programme selection You a Q.
On screen menus Menu selection 2. Press the MENU button and then D / E button to display each menu. Press the G button and then D / E button to select a menu item. 3. Change 1. the setting of F/G button. You can move to the ton and to move an item in the sub higher level menu to the lower level or pull-down menu with by pressing the OK butby pressing the MENU menu button. Note : In the a. TV/AV, COMPONENT (option) mode, the PC (option) b. is not menu displayed.
Setting Channel up TV stations Up to 100 TV stations can be stored by programme numbers (0 to 99). Once you have preset the stations, you will be able to use the D / E or NUMBER buttons to scan the stations you have programmed. Stations can be tuned using automatic or manual modes. Auto programme Manual programme Programme edit Favourite programme Auto programme DEFG OK tuning All stations that can be received are stored by this method.
up TV stations Setting Manual programme tuning Channel Auto programme Manual programme Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station name 1. 3. Favourite programme with five characters to each programme number. Press the MENU button and then D / E button to select the Channel 2. Programme edit DEFG OK MENU menu. Press the G button and then D / E button to select Manual programme.
Setting Assigning a station name 1. Repeat the 'Manual programme tuning' steps Channel Auto programme Manual programme Programme 2. edit 3. Favourite programme OK MENU 1 to 2. Press the G button and then D / E button to select Name. Press the G button and then +, DEFG up TV stations use the D / E . You can use a blank, -,thenumber0to9andthealphabetAtoZ. 4. With the F button you can select in the opposite direction. Select the position by pressing the F / G button and then make 5.
Setting Programme up TV stations Channel edit Auto programme Manual programme This function enables you to delete or skip the stored programmes. Also you can move some stations to other programme numbers or insert a blank station data into the selected programme number. 1. Press the MENU button and then D / E button to select the Channel menu. 2. Press the G button and then D / E button to select edit. Programme 3. Press the G button to menu. display the 0C0 35S Deleting 1. 2.
up TV stations Setting Favourite programme Channel Auto programme This function lets you select your favourite programmes Manual programme Programme edit Favourite programme directly. 1. Press the MENU button and then D / E button to select the Channel menu. 2. Press the G button and then D / E to select Favourite programme. DEFG OK MENU Favourite programme On -- ----- -- ----- -- ----- -- ----- -- ----- -- ----- -- ----- -- ----- DEFG 3. TV/AV 4. 5. LIST Q.VIEW MENU 6.
Picture PSM 1. Status (Picture Memory) Picture Press the MENU button and then D Picture adjustment / E Brightness Press the G button and then D / E button to select PSM. 3. Press the G button and then D / E button to select ting 4. Contrast menu. 2. on PSM button to select the the PSM a picture Colour Sharpness set- menu. Press the OK button. DEFG OK MENU Picture PSM Dynamic Contrast Standard Brightness Mild Colour Game Sharpness User DEFG 5.
Picture adjustment Picture format (option) You can watch TV in various picture formats; 16:9, 14:9, Zoom, Spectacle, Full, Original, 4:3. Repeatedly press the ARC button to select your desired picture for- mat. 16:9 You enjoy the cinema (the picture format of 16:9) or general TV programme through the 16:9 mode. The screen 16:9 is viewed just like that but the screen 4:3 is magnified to the left and right so that the screen 16:9 is full.
Sound SSM You Sound (Sound Status Memory) SSM select your preferred sound setting; Flat, Music, Movie or and you can also adjust the sound frequency of the equalizer. can Speech 1. adjustment AVL Balance Press the MENU button and then D / E button to select the Sound menu. Sound SSM Flat AVL Music Balance Movie DEFG OK MENU Speech G User DEFG 2. 3. OK MENU Press the G button and then D / E button to select SSM.
Sound adjustment Stereo/Dual reception When a programme is selected, the sound information for the station appears after the programme number and station name disappear. I/II Broadcast On Screen Mono MONO Stereo STEREO Dual DUAL I Display Mono sound selection In stereo reception if the stereo signal is weak, you can switch to by pressing the I/II button twice. In mono reception the depth of sound is improved. To switch back to stereo, press the I/II button twice again.
TIME Menu Clock Time Time You must set the time 1. using Off time on/off time function. Press the MENU button and then D/E TIME 2. before correctly On time button to select the Auto off menu. Press the G button and then D / E button to select TIME. Time DEFG Time OK MENU -i-i:i-i- Off time On time Auto off DEFG OK MENU 3. Press the G 4. Press the G button and then D/E button to 5. Press the MENU button to button and then D/E button to adjust the hour. adjust the minute.
TIME Menu Time Auto off Time Off time If you select On on the Auto off menu, the set will automatically switch itself to standby mode approximately ten minutes after a TV On time Auto off station DEFG OK 1. MENU stops broadcasting. Press the MENU button and then D/E TIME button to select the menu. 2. Press the G button and then D / E button to select Auto off. 3. Press the G button and then D / E button to select On or Off. Time Time Off time On time On Auto off Off MENU DEFG 4.
Other functions TV, AV and PC modes Setup Language Input be set for TV, AV or PC mode. AV mode is used when a Inputs video cassette recorder (VCR), or other equipment is connected to can Child lock the set. Note : When VCR is connected via the aerial socket the set is a used in TV mode. See the 'Connection of external DEFG OK MENU equipment' sec- tion. 1. Press the MENU button and then D / E button to select the Setup 2. 3. menu. Press the G button and then D / E button to select Input.
Other functions Child lock Setup Language Input The TV Child lock can be set that the remote control handset is needed to so control it. This feature can be used to prevent unauthorized view- ing. DEFG OK 1. MENU Press the MENU button and then D / E button to select the Setup 2. 3. menu. Press the G button and then D / E button to select Child lock. Press the G button and then D / E button to select On or Off on the Child lock menu.
Teletext Teletext (or TOP with the teletext Teletext is a is text) system an can grammes, share information prices only a set receive the teletext broadcast. free service broadcast up-to-the-minute therefore optional function, on by most TV stations which news, and many other gives weather, television pro- topics. The teletext decoder of this TV can support the SIMPLE, TOP and systems.
Teletext TOP text The user (option) guide displays the bottom of the four fields-red, green, yellow and blue at The yellow field denotes the next group screen. and the blue field indicates the next block. Block / group / page selection 1. With the blue button you can progress from block to block. 2. Use the yellow button to proceed to the next group with automatic overflow to the next block. 3. With the green button you can proceed to the next page with automatic overflow to the next group.
Teletext Special ? teletext functions REVEAL Press this button to display concealed information, such as puzzles. again to remove the information from the solutions of riddles Press this button or display. SIZE Selects double height text. enlarge the top button again to enlarge Press this button to Press this page. Press this button again half of the page. the bottom half of the to return to the normal display.
Connection of external equipment You can connect additional equipment, such etc. to your set. Examples are shown below. as VCRs, camcorders Aerial socket 1. 2. 3. VCR 4. 5. Connect the RF out socket of the VCR to the aerial socket of the set. Connect the aerial cable to the RF aerial in socket of the VCR. Store the VCR channel on a desired programme number using the 'Manual programme tuning' section. Select the programme number where the VCR channel is stored. Press the PLAY button on the VCR.
Connection of external S-Video/Audio in sockets When connecting picture quality will 1. an equipment (S-Video) (option) S-VIDEO VCR to the S-VIDEO socket, the be further improved. Connect the S-Video socket of the VCR to the S-VIDEO socket of the set. 2. Connect the audio cable from the S-VIDEO VCR to the AUDIO S-VIDEO VCR sockets of the set. 3. Select S-Video 4. Press the PLAY button The VCR DVD 1. by pressing on playback picture the TV/AV button repeatedly. 3 the VCR.
Connection of PC PC in socket (option) Connect the signal cable from the monitor output socket of the PERSONAL COMPUTER to the PC input socket of the set. Connect the audio cable from the PC to the PC SOUND sockets of the set. Press the TV/AV or MULTIMEDIA button to select PC. Switch on the PC, and the PC screen appears on the set. The set can be operated as the PC monitor. 1. 2. 3. 4.
Connection of PC PC (option) PC Setup (only DVI-Analogue mode) (option) H-Position V-Position You can adjust horizontal/vertical position, clock, phase, configure, reset as you prefer. and auto- Clock Phase Auto Configure Reset 1. Press the MENU button and then D / E button to select the Setup 2. 3. 4. DEFG menu. OK MENU Press the G button and then D / E button to select Input. Press the G button and then D / E button to select PC.
External Control Control Device - Connect the RS-232C trol - - system) input jack an external control device and control the TV's functions Connect the serial (such as a (option) (option) computer or an A/V con- externally. port of the control device RS-232C connection cable is not RS-232C to ; RS-232C Setup Setup to the RS-232C jack on the TV back panel. with the TV. supplied Setup Setup PC Type of Connector; 9-Pin Male Connector; D-Sub 9-Pin ype of No.
External Control Control Device ; RS-232C Setup Setup (option) (option) Communication Communication Parameters ? Baud rate ? Data ? : 9600 bps (UART) length : 8 Parity : None bits Use (reverse) * a crossed ?Stopbit:1bit ? Communication code cable. Command Command Reference List COMMAND COMMAND 2 1 01. Power ASCII code : k a T ransmission / DATA (Hexa) Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] 0~1 * [Command 1]: First command.
External Control Control Device 01. Power On 05. Volume Mute (Command:a) You Transmission mute 1 :PowerOn Data [a][ ][Set ID][ ][OK][Data][x] 0 : Volume mute off 1 : Volume mute Acknowledgement Transmission [e][ ][Set ID][ ][OK][Data][x] [k][a][ ][Set ID][ ][FF][Cr] 06. Volume Control Acknowledgement Power Off (Command:f) G To adjust volume. [a][ ][Set ID][ ][OK][Data][x] : on (Volume on) (Volume off) on G To show Power On/Off.
External Control Control Device 09. Color (Command:i) G To adjust the You can also 15. Tune Command color. screen G Tune channel color in the Picture adjust ; RS-232C Setup Setup to (Command:m a) number. following Physical/major/minor menu. Transmission Transmission [k][i][ ][Set ID][ ][Data][Cr] [m][a][ ][Set ID][ ][Data0][ ][Cr] Data Data0: Min:0~Max:64 ? (option) (option) Refer to 'Real data Min 1'. See page 33.
Troubleshooting check list Symptoms No picture, no sound Sound OK, poor picture Picture OK, poor sound Picture blurred Lines or streaks in Poor picture reception on some channels No colour Poor colour Remote control does not work Incorrect position Vertical bars or stripes on background Horizontal noise Signal Cable message appears Check these items and try to adjust these The mains plug-(plugged in and switched on) Is the TV switched Try on another channel (weak signal) Check
