DLP PROJECTION TV OWNER'S MANUAL BZ03 Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back information to your dealer when you Model number : Serial number : and quote this require service.
Contents Installation 3 Location and function of controls Remote control handset Battery installation Front panel / Rear panel 4 Basic Operation On and off / Programme selection Volume adjustment / Quick view / Mute function On screen language selection (option) 8 On Screen Menus Menu selection 9 SETUP Menu Auto programme tuning Manual programme tuning Fine Tuning / Programme edit Calling the programme table 10 PICTURE Menu 15 PSM(Picture Status Memory) Picture adjustment Adjusting Auto Colour C
Installation Power This set operates on an AC mains supply, the voltage is as indicated on the label on the back cover. Never apply DC power to the set. In the event of thunderstorms or powercuts, please pull out the aerial and mains plugs. Warning To prevent fire moisture. The or shock hazard, do not expose the set to rain working life of this set (Russia only) is 7 years since the date of delivery or to consumer.
Location and function of controls All the functions Some functions panel of the set. 1 MULTIMEDIA TV/AV 13 MUTE TEXT 14 5 PR- Before you use the remote control handset, teries. See the next page. 1. SLEEP PIP 2. PR+ SWAP 3. PR CANCEL/EXIT 15 7 4. VOL OK 5. VOL 8 123 456 9 7 8 9 PSM 0 SSM POSITION SIZE 16 10 STILL 6. INDEX TIME MIX MODE REVEAL M / ? 7. LIST 8. ARC 12 REW standby off to or standby.
Location and function of controls 13. TV/AV selects the remote operating mode. switches the set on from standby. 14. TELETEXT BUTTONS (option) POWER 1 These buttons are used for teletext. For further details, see the 'Teletext' section. 15. CANCEL/EXIT Clears all on-screen displays and returns to TV MULTIMEDIA TV/AV LIST ARC 2 viewing from any menu. 13 18 11 MUTE PIP 4 PR- 16. SSM (Sound Status Memory) recalls your preferred sound setting. 6 17.
Location and function of controls Front panel Lamp indicator, operation indicator, and temperature indicator, located side the front panel operating status of the DLP(Digital Light Processing) projection TV. controls reveal the ON/OFF TV/AV TV/AV 1 MENU MENU OK VOL PR OK 234 VOL PR 5 6 789 1. REMOTE CONTROL SENSOR 7. OPERATION INDICATOR (Refer 2. TV/AV 8. LAMP INDICATOR to 9. TEMPERATURE INDICATOR (Refer to p.7) p.7) selects the remote switches the set 3. 10.
Location and function of controls Rear panel (R) AUDIO AV4 INPUT (L)/ SOCKET MONO VIDEO S-VIDEO S-VIDEO INPUT SOCKET R) COMPONENT UPGRADE PORT NPUT 1 INPUT 2 576i480i 576/480i 576p/480p 720p/ 576p480p 720p/ 1080i AUDIO RGBINPUT PC/DTV (XGA/ VI 576p/ 480p/ 720p/ 1 080) 1080i S RGBDVI NPUT AV4 INPUT O AV4 INPUT Y (L) PB AV3 AUDO (R) AV1 AV2 PR PC/DTV (XGA/ 576p/ 480p/ 720p/ VARIABLE AUDIOOUT 1080i) (L) AUDIO (R) D AERIAL SOCKET RGB INPUT SOCKETS RGB INPUT COMPONENT
Basic Operation On and off 1. Before turning the set on, be sure that the main power switch the set is pushed on. When the main switch is pushed on, the LED will be lit up red. This mode is Stand-by. If the set is in stand-by mode, press the POWER, PR Δ / Ε, TV/AV, MULTIMEDIA or NUMBER button on the remote control handset to turn it on fully. The LED will blink orange for a while and then lit up green when the power is successfully on.
On Screen Menus The dialogue between you and your set takes place required for the operating steps are also displayed. on screen with operator an menu. The buttons Menu selection 1. Press the MENU button and then 2. Press the 3. Repeatedly press Note : a. On some Γ button and then the Δ / Δ / Ε button to display button to select Ε each a menu the MENU button to return to normal TV menu. item. viewing. models, the Language will not be display.
SETUP Menu SETUP Γ Auto programme Manual programme PICTURE Programme edit Up to 100 TV stations can be stored in this set by programme numbers (0 to 99). Once you have preset the stations, you will be able to use the PR Δ / Ε or NUMBER buttons to scan the stations you programmed. Stations can be tuned using automatic or manual modes. Auto programme AUDIO tuning All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this set.
SETUP Menu Manual programme tuning SETUP Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station name with five characters to each programme number. 1. 2. 3. Press the MENU button and then Δ / Ε button to select the SETUP menu. Press the Γ button and then Δ / Ε button to select Manual programme. Press the Γ button to select System.
SETUP Menu SETUP Γ Auto programme Manual programme PICTURE Programme edit Assigning a station name 1. Repeat the 'Manual programme tuning' steps 2. 3. AUDIO 4. TIME 5. 6. SPECIAL 1 to 2. Press the Γ button to select Name. Press the Δ button. You can use a blank, +, -, the numeric 0 to 9 and the alphabet A to Z. With the Ε button you can select in the opposite direction. Select the next position by pressing the Γ button and then take your choice of the second character, and so on.
SETUP Menu Programme edit SETUP This function enables you to delete or skip the stored programmes. Also you can move some stations to other programme numbers or copy a blank station data into the selected programme number. 1. 2. 3. Press the MENU button and then Δ / Ε button to select the SETUP menu. Press the Γ button and then Δ button to select / Ε Programme edit. Press the Γ button to display the Programme edit menu. C1 MENU Prev.
SETUP Menu Calling the programme table You can check the programmes stored in the memory the programme table. by displaying table Press the LIST button to display the Programme table The programme table appears on the screen. Displaying programme C1 menu.
PICTURE Menu PSM 1. 2. 3. (Picture Status Memory) SETUP Δ / Ε Press the MENU button and then button to select the PICTURE menu. Press the Γ button and then Δ / Ε button to select PSM. Press the Γ button and then Δ / Ε button to select a picture setting on the PSM pull-down menu.
PICTURE Menu SETUP SETUP Adjusting PSM Auto Colour Control Contrast PICTURE Γ Brightness Colour AUDIO 1. 2. Sharpness / Ε button to select the PIC- button to select Colour temperature. Tint TIME Δ / Ε Press the MENU button and then TURE menu. Press the Γ button and then Δ Colour temperature SETUP PSM Contrast SPECIAL PICTURE Brightness Colour AUDIO AUDIO Sharpness Warm Tint TIME Colour temperature Γ Medium Cool SPECIAL Φ Prev. 3. 4.
PICTURE Menu Picture format You can watch TV in various picture formats; 4:3, 16:9(Wide), 14:9, Zoom and Auto. You can repeatedly press the ARC button to select your desired picture format. 4:3 Following selection will lead you to view a picture with an original 4:3 aspect ratio, with black bars appearing at both the left and right sides. 16:9 Following selection will lead you to adjust the picture horizontally, in linear proportion, to fill the entire screen (useful for viewing 4:3 formatted DVDs).
AUDIO MENU SETUP SETUP SSM SSM (Sound Status Memory) AVL PICTURE TV speaker Balance AUDIO Γ Equalizer You preferred sound setting; Dolby Virtual, Flat, Speech and you can also adjust the sound frequency of equalizer, balance. If you switch AVL to on, the set automatically keeps on an equal volume level even if you change procan select your Music, Movie, or grammes. TIME 1. SPECIAL 2. 3. Press the MENU button and then Δ / Ε button to select the AUDIO menu.
AUDIO MENU AVL (Auto Volume Leveler) SETUP If you select AVL On, the set automatically level even if you change programmes. keeps on an equal vol- ume 1. 2. 3. Press the MENU button and then Δ / Ε button to select the AUDIO menu. Press the Γ button and then Δ / Ε button to select AVL. Press the Γ button and then Δ / Ε button to select On or Off on the AVL pull-down menu.
AUDIO MENU SETUP SETUP PICTURE SSM Balance AVL You TV speaker can 2. Equalizer adjust balance. Press the MENU button and then Δ / Ε button to select the AUDIO menu. Press the Γ button and then Δ / Ε button to select Balance. 1. Balance AUDIO Γ adjustment SETUP SETUP TIME PICTURE PICTURE SPECIAL Balance 0Φ Γ AUDIO AUDIO TIME TIME SPECIAL SPECIAL Press the Γ button. Make desired adjustment with the 3. 4. pull-down / Γ button Φ on the Balance menu. Press the OK button.
AUDIO MENU Stereo/Dual reception When a programme is selected, the sound information for the station appears after the programme number and station name disappear. Broadcast On Screen Mono MONO Stereo STEREO Dual DUAL I Display Mono sound selection In stereo reception if the stereo signal is weak, you can switch to by pressing the I/II button twice. In mono reception the depth of sound is improved. To switch back to stereo, press the I/II button twice again.
TIME MENU SETUP SETUP PICTURE AUDIO TIME Clock Clock Off time You must set the time On time 1. Auto sleep Sleep timer 2. correctly before using on/Off time function. Press the MENU button and then Δ / Ε button to select the TIME menu. Press the Γ button and then Δ / Ε button to select Clock. Clock SETUP SETUP Γ PICTURE SPECIAL 2004 Year Date 9 9 On time Time AM 01 53 Auto AUDIO AUDIO Γ Off time sleep Sleep timer TIME SPECIAL SPECIAL Φ Prev. SLEEP 3. 4. 5.
TIME MENU Auto sleep If there is minutes. 1. 2. no Clock SETUP input signal, the set will turn off automatically after 10 Off time PICTURE On time Ε Press the MENU button and then / button to select the TIME menu. Press the Γ button and then Δ / Ε button to select Auto sleep. Δ AUDIO TIME Auto sleep Sleep timer Γ Clock SETUP SETUP Off time PICTURE sleep Auto AUDIO AUDIO SPECIAL On time Γ Sleep timer Off On TIME SPECIAL SPECIAL Φ Prev. SLEEP 3. 4. 5.
SPECIAL MENU SETUP SETUP Main PIP PICTURE Main Picture Source Selection input input Inputs can be set for TV, AV, Component or RGB-DTV/PC, DVIDTV/PC mode. AV mode is used when a video cassette recorder (VCR), or other equipment is connected to the set. Child lock Language AUDIO Cinema Note : When a VCR is connected via the aerial socket the set is used in TV mode. See the 'Connection of external equipment' section. Demo TIME 1. SPECIAL Γ 2. 3.
SPECIAL MENU Child Lock SETUP The TV can be set so that the remote control handset is needed to control it. This feature can be used to prevent unauthorized viewing. 1. 2. Press the MENU button and then Δ / Ε button to select the SPECIAL menu. Press the Γ button and then Δ / Ε button to select Child lock.
SPECIAL MENU SETUP SETUP Main PIP PICTURE input input Shows you how to Child lock Language AUDIO Demo 1. Cinema Demo 2. TIME navigate the TV's on-screen menus. Press the MENU button and then Δ / Ε button to select the SPECIAL menu. Press the Γ button and then Δ / Ε button to select Demo. SETUP SETUP SPECIAL Γ Main PIP input input PICTURE Child lock AUDIO AUDIO Cinema Language Demo TIME Γ Auto demo demo SPECIAL SPECIAL Φ Prev. 3.
Picture In Picture Option : PIP (Picture In Picture) displays a picture within a (PIP) Function picture. On and off Press the PIP button to switch on the sub picture. Press CANCEL/EXIT button to switch it off. Each press of PIP button button changes the screen shown below. display as PIP Note ture : When the sub picture size is 1/2 of the main picture, the pic- quality might get poor.
Teletext Teletext (option) (or TOP text) is with the teletext system Teletext is a optional function, an can free service broadcast up-to-the-minute grammes, share information prices therefore only a set receive the teletext broadcast. on by most TV stations which news, and many other The teletext decoder of this TV can gives weather, television pro- topics. support the SIMPLE, TOP and FASTEXT systems.
Teletext TOP text The (option) guide displays user (option) the bottom of the four fields-red, green, yellow and blue at The yellow field denotes the next group screen. and the blue field indicates the next block. Block / group / page selection 1. With the blue button you can progress from block to block. 2. Use the yellow button to proceed to the next group with automatic overflow to the next block. 3.
Teletext Special (option) teletext functions REVEAL Press this button to display concealed information, such as solutions of riddles or puzzles. Press this button again to remove the information from the display. SIZE Selects double height text. Press this button to enlarge the top half of the page. Press this button again to enlarge the bottom half of the page. Press this button OK to return to the normal display. UPDATE Displays the TV picture on the screen while waiting for the teletext page.
Connection of PC PC in socket 1. Connect the signal cable from the monitor output socket of the input socket of the set. PERSONAL COMPUTER to the PC 2. Connect the audio cable from the PC to the RGB/DVI INPUT COMPONENT INPUT 1 576i/480i UPGRADE PORT 576p/480p 720p/ INPUT 2 RGB INPUT PC/DTV (XGA/ 576p/ 480p/ 720p/ 1080i) 576i/480i 576p/480p 720p 1080i 1080 RGB/DVI INPUT Y AUDIO sockets on the back of the set. (L) PB (R) 3.
Connection of PC SETUP SETUP Main PIP PICTURE PICTURE RGB-DVI/PC Mode input input 1. Child lock Language AUDIO AUDIO 2. Cinema Press the MENU button and then Δ / Ε button to select the SPECIAL menu. Press the Γ button and then Δ / Ε button to select Main Input. Demo 3. TIME TIME Γ Press the button and then Δ / Ε button to select RGB- DVI/PC. RGB-PC SPECIAL SPECIAL Γ Adjust H-Position 0 V-Position 0 H-Size 0 V-Size 0 Phase -15 0 V-Size 0 ΔΕ ΔΕ 4. 5. 6.
Connection of external You connect additional can equipment, such as equipment VCRs, camcorders etc. to your set. Here shown may be somewhat different from your set. Aerial socket COMPONENT 1. 2. 3. 4. 5. Connect the RF out socket of the VCR to the aerial socket on the back of the set. Connect the aerial cable to the RF aerial in socket of the VCR. Store the VCR channel on a desired programme number using the 'Manual programme tuning' section.
Connection of external S-Video / Audio (R) input equipment sockets (option) AUDIO When connecting an VCR to the S-VIDEO socket, the ity will be further improved. (L)/ MONO VIDEO S-VIDEO AV4 INPUT 1. 2. VCR 3. picture qual Connect the S-video socket of the VCR to the S-VIDEO socket of the set. Connect the audio cable from the VCR to the AUDIO sockets of the AV2 or AV4 INPUT. Select S-Video2 or AV4 by pressing the TV/AV button repeat- edly. 4.
Troubleshooting check list Symptoms No picture, no sound Sound OK, poor picture Picture OK, poor sound Picture blurred Lines or streaks in Poor picture reception on some channels No colour Poor colour Remote control does not work Poor brightness Strange sound from inside the monitor Check these items and try to adjust these The mains plug-(plugged in and switched on) Is the TV switched on? Try another channel (weak signal) Check aerial (plugged into Check aerial (broken lead?)
