OWNER’S MANUAL STYLER Read this owner’s manual thoroughly before operating the appliance and keep it handy for reference at all times S3WERB MFL66101230 www.lg.
TABLE OF CONTENTS TABLE OF CONTENTS 3 4 PRODUCT FEATURES 25 Checking the Water Tanks IMPORTANT SAFETY INSTRUCTIONS 25 Loading the Styler Hangers 4 Safety Instructions for Installation Using the Moving Hanger 5 Safety Instructions for Connecting Electricity Pants Hanger or Pants Crease Care 6 Basic Safety Precautions Shelf 7 Grounding Instructions 29 PRODUCT OVERVIEW 8 8 Parts 9 Accessories 10 The Moving Hanger 10 The Pants Crease Care 11 The Shelf 11
PRODUCT FEATURES 3 PRODUCT FEATURES REMOVE ODORS Use the Styler's Refresh cycle to quickly and easily remove odors from clothes. *Control Lock REFRESH CLOTHING OR ADD AN AROMA Infuse items with the aroma from your favorite dryer fabric softener sheets to keep clothes and accessories looking, feeling, and smelling refreshed. REMOVE WRINKLES The Refresh cycle also uses steam and a moving hanger that vibrates approximately 180 times per minute to remove the wrinkles in clothing.
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE. There are many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol. This symbol alerts you to potential hazards that can result in product damage, property damage, or serious bodily harm or death. The safety alert symbol will be followed by either the hazard signal word WARNING or CAUTION.
IMPORTANT SAFETY INSTRUCTIONS 5 WARNING For your safety, the information in this manual must be followed to minimize the risk of fire, explosion, or electric shock, or to prevent property damage, injury to persons, or death. SAFETY INSTRUCTIONS FOR INSTALLATION • • • • • with all governing codes and ordinances. Follow the details in the installation instructions. Electric shock can result if the appliance is not properly grounded.
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE. WARNING To reduce the risk of fire or explosion, electric shock, property damage, injury to persons or death when using this appliance, follow basic safety precautions, including the following: BASIC SAFETY PRECAUTIONS USE • • • Do not allow children to play on or in the appliance. Close supervision of children is necessary when the appliance is used near children.
IMPORTANT SAFETY INSTRUCTIONS 7 WARNING To reduce the risk of fire or explosion, electric shock, property damage, injury to persons or death when using this appliance, follow basic safety precautions, including the following: • Do not use heat to dry articles containing foam rubber or similarly textured rubber-like materials. • • Do not open door during operation. The performance of the product may be adversely affected. Do not use the product for other than the intended purposes.
PRODUCT OVERVIEW PRODUCT OVERVIEW PARTS interior light hooks for Pants Crease Care moving hanger interior light Pants Crease Care shelf holder door* shelf aroma filter steam nozzle hot air circulation vent water drain tank water supply tank drip tray * The door swing can be reversed by the installer to fit the installation location.
PRODUCT OVERVIEW ACCESSORIES Included Accessories shelf 2 hangers* drip tray pants hanger* 2 non-skid pads anti-tip kit 2 rear cap covers wrench 2 hinge covers *An ordinary metal/plastic hanger can be used if the hook is less than 5/32 in. (4 mm) thick. The hook must fit in the indentation in the moving hanger snugly. If the fit is too loose, it may result in vibration, noise, and damage to clothing.
PRODUCT OVERVIEW THE MOVING HANGER door to the Pants Crease Care. Hang clothes on the moving hanger using the hangers provided with the Styler, or use any plastic or metal hanger that hooks snugly into the indentations in the moving hanger. • Open the door to the Pants Crease Care by pressing the icon on the front. • The Pants Crease Care keeps pants legs creased while removing wrinkles elsewhere.
PRODUCT OVERVIEW 11 THE SHELF Use the shelf when styling clothes or other items that are difficult to hang or that may be damaged by hang drying. • Use the shelf for stuffed toys, pillows, hats, and other accessories. • Use the shelf for sweaters, knits, lingerie, or delicate blouses that can show hanger marks, stretching, or other damage if dried on a hanger. • For best drying performance, do not stack items on the shelf. Dry single items or place items side by side with space between.
INSTALLATION INSTALLATION INSTALLATION OVERVIEW Please read the following installation instructions first after purchasing this product or transporting it to another location. 7 3/4 in. 20cm ov er 2 in. 5cm over 2 in.
INSTALLATION 13 UNPACKING THE STYLER • Remove tape and any temporary labels from the Styler before using. Do not remove any warning labels, the model and serial number label, or the Tech Sheet that is located under the front of the Styler. • To remove any remaining tape or glue, rub the area briskly with your thumb. Tape or glue residue can also be easily removed by rubbing a small amount of liquid dish soap over the adhesive with your fingers. Wipe with warm water and dry.
INSTALLATION INSTALLATION LOCATION REQUIREMENTS WARNING Read all installation instructions completely before installing and operating the Styler. It is important to review this entire manual before installing and using the Styler. The installation requires: yy A grounded electrical outlet located within 2 ft. (61 cm) of either side of the appliance. yy A sturdy floor to support the total appliance weight of 183 lbs (83 kg). The combined weight of any other laundry appliances should also be considered.
INSTALLATION 15 Recommended Installation Spacing The following clearances are recommended for the Styler. Although the Styler has been tested for clearances of 13/16 inch (3 cm) on the sides and rear, recommended clearances should be considered for the following reasons: 7 3/4 in. (20 cm) Additional space should be considered for ease of installation and servicing. Additional space might be required for wall, door and floor moldings. 2 in.
INSTALLATION LEVELING THE STYLER WARNING WARNING yyThe Styler is heavy. Use two or more people if installing the rear leveling feet. Failure to do so can result in back injury or other injury. yyKeep the Styler upright when moving and installing it. If you lay the Styler on its side, refrigerant may leak and cause the appliance to malfunction. yy To reduce the risk of injury to persons, adhere to all industry recommended safety procedures including the use of long-sleeved gloves and safety glasses.
INSTALLATION 17 REVERSING THE DOOR It is possible to reverse the direction of the door swing. This should be done by the installer at the time of installation, if desired. INSTALLING THE ANTI-TIP DEVICE • Appliances can tip, resulting in damage or injuries. Do not operate the unit without the anti-tip device in place and engaged.
INSTALLATION ASSEMBLING THE DRIP TRAY INSTALLING CAP COVERS Before using the Styler, insert the drip tray onto the bottom of the cabinet. 1 Line up the nubs on the cap cover with the holes in the top corner of the cabinet. 2 Snap the cap cover into place. Repeat with the remaining cap cover on the other corner. 1 Hold the tray so the arrow and letter on the front of the tray face up. 2 Insert one side of the tray first, then the other. Push the tray until it slides completely in.
OPERATION 19 OPERATION BEFORE USE Clean the Styler. Clean the Styler thoroughly and wipe off all dust that accumulated during shipping. See Maintenance, page 38. Do not plug in or operate the appliance until the interior and exterior have thoroughly dried. CAUTION yy Do not scratch the Styler with a sharp object or use a detergent that contains alcohol, bleach, a flammable liquid or an abrasive when removing any tape or adhesive from the Styler,.
OPERATION USING THE STYLER 1 PREPARE ITEMS • Wash clothes first, if needed. • No heat-sensitive items or items that can be damaged by exposure to water. See Choosing Styler-Safe Clothing, page 21. • Place items on hangers or the shelf. • Fasten buttons and close zippers to keep items on moving hangers and prevent damage. 2 CLEAN LINT FILTER, CHANGE SHEET IN AROMA FILTER Lift out filter and remove lint from last load for faster and more efficient performance.
OPERATION 21 SORTING LOADS Grouping Similar Items Fabric Care Labels Most articles of clothing feature fabric care labels that include instructions for proper care. Below are some of the symbols that are relevant to choosing appropriate items for the Styler.
OPERATION FABRIC CARE GUIDE = yes § = check label Refresh cycle *Control *Control Lock Lock fabric vegetable fibers cotton linen, hemp, ramie animal fibers natural fibers alpaca, camel hair, cashmere clothes removing wrinkles towels, socks, underwear, jeans, sportswear, t-shirts, blankets summer clothes, tablecloths coats, suits § scarves, knitwear fur, leather coats, scarves silk silk neckties, ribbons, scarves, blouses, silk velvet/plush winter coats, suits, sportswear, unif
OPERATION 23 FABRIC CARE GUIDE (CONTINUED) = yes § = check label Refresh cycle *Control *Control Lock Lock man-made fibers fabric clothes removing wrinkles removing odors Sanitary cycle Gentle Dry cycle *Control Lock comments acetate suit lining, blouses, neckties, pajamas acrylic thermal underwear, knitwear Lay clothes on shelf stockings, lingerie Lay clothes on shelf sportswear, curtains nylon polyurethane stretchable clothing (contai
OPERATION CHECKING THE FILTERS BEFORE EVERY LOAD Checking the Lint Filter Always make sure the lint filter is clean before starting a new load; a clogged lint filter will increase drying times. 1 2 Use a dryer fabric softener sheet to add a refreshing aroma to items. Replace the fabric softener sheet after every use. 1 Remove the aroma filter from the Styler. 2 Open the aroma filter and insert a dryer fabric softener sheet into it. 3 Close the aroma filter and insert it back in the Styler.
OPERATION 25 CHECKING THE WATER TANKS Check the water in the water tanks before use. The water supply tank must be filled with water before using the Styler. The Styler does not work without water. The water drain tank should be emptied before each use. 1 Pull the handle of each tank forward to remove the tank and check the level of water. yy Check all pockets to make sure that they are empty. Items such as clips, pens, coins, and keys can damage both the Styler and your clothes.
OPERATION Hangers The hangers that come with the Styler are for use with the Styler only. Any plastic or metal hanger that has a hook less than 5/32 in. (4 mm) thick and hooks snugly into the indentations in the moving hanger can be used in the Styler. • Do not use hangers with wool, knitwear, or delicate lingerie. The garments may stretch or be left with hanger marks. Using the Moving Hanger 1 Insert hangers into slots and pull down to secure the hook snugly.
OPERATION 27 Opening and Closing the Pants Hanger crochet 1 lames du cintre To open, fold the hook down toward the hanger blades to unlock and separate the blades. Using the Pants Crease Care 1 Open the Pants Crease Care by pressing on the icon on the side. 2 Hang the pants hanger on the hook above the Pants Crease Care that best fits the length of the pants being pressed.
OPERATION Shelf Use the shelf for clothes and items that cannot be placed on hangers. Do not stack items on the shelf. For best drying performance, use the shelf for a single item or smaller items with space between. • Hang the shelf on the shelf holder when treating long clothes such as coats or dresses. Assembling the Shelf 1 Hold the shelf so that the gray trim is toward the front. Front 41.3 in.
OPERATION 29 CONTROL PANEL The control panel responds to touch using static electricity. A light touch is enough to operate it. Use a cloth when cleaning the controls to avoid contacting and activating the keys. Foreign substances on the control, wearing gloves, or touching the keys through cloth may prevent the keys from activating. Control Panel Features Depending on the model, some of the following functions may not be available.
OPERATION Touch and hold the icon for three seconds to activate/deactivate the Control Lock function. See Locking the Controls, page 34. GENTLE DRY CYCLE / *SOUND ON / OFF Touch the icon to select a Gentle Dry cycle, touch repeatedly to toggle through the settings. See the Cycle Guide, page 31. Touch for three seconds to turn the button and alert sounds on/off. See Turning the Alert Sounds On/Off, page 34.
OPERATION 31 CYCLE GUIDE Cycle Processes SPECIAL CARE GENTLE DRY CYCLE SANITARY CYCLE REFRESH CYCLE Cycle Setting Clothing / Fabric Type Prepare Normal Light suit, coat, school uniform, scarf, wool, knitwear, outdoor/performance clothing, towels, underwear, t-shirts, socks, jeans, jean jackets, lingerie, sportswear, tablecloths Heavy 100% wool, polyester, rayon, urethane, gabardine, Gore-Tex, cotton, nylon, ramie, hemp Normal Heavy Normal Delicates Time Dry Heat
OPERATION CHOOSING A CYCLE Special Care Styler cycles are designed to fit a variety of situations. Select the cycle and setting that best match the load contents and desired results for maximum performance and fabric care. For best results, pay attention to garment care labels and choose a cycle that is appropriate for the fabric content of the items. For a guide to the symbols used on fabric care labels, see the chart on page 21 and the Fabric Care Guide on pages 22-23.
OPERATION 33 CYCLE SETTINGS AND OPTIONS Cycle Selector Icons To change the settings during the cycle, touch Start/Pause to pause the cycle, then touch the relevant cycle selector icon to change settings. • Touch the Start/Pause button to activate the control panel. The cycle selected and the Start/Pause button start blinking. Selecting a Cycle • Very thick clothing may not be as uniformly dry at the end of the Gentle Dry cycle.
OPERATION SPECIAL FUNCTIONS Some buttons also activate special functions, including the Control Lock. Locking the Controls Use Control Lock to prevent unwanted use of the Styler or to keep cycle settings from being changed while the Styler is operating. 1 Touch and hold the Sanitary icon for three seconds to activate or deactivate the Control Lock function. 2 The Control Lock icon lights in the display, and all controls are disabled except the Power button.
OPERATION 35 STORAGE FUNCTION The storage function is set. NOTE •• Once completed, a selected course will lead to the storage function. •• During the drying course, no storage function is set. •• After the storage function is entered and the power button pressed, the setting is released. •• The storage function operates for a maximum of 24 hours. •• You can open the door anytime even during the course of the storage function.
SMART FEATURES SMART FEATURES TAG ON 2 Before Using Tag On The Tag On function allows you to conveniently use the LG Smart DiagnosisTM and Smart Download Cycle features to communicate with your appliance right from your own smart phone. To use the Tag On function: 1 Download the LG Smart Styler app to your smart phone. 2 Turn on the NFC (Near Field Communication) function in your smart phone.
SMART FEATURES 37 Downloading Styler Cycles LG Smart Styler’s Smart Download Cycle app allows you to download a cycle for later use. The cycle is available at the Downloaded cycle position on the control panel until another cycle is downloaded. 1 Install the LG Smart Styler application on an NFC-equipped smart phone. Download the application from the Play Store, install it and run it. 5 Touch the Tag On logo.
MAINTENANCE MAINTENANCE REGULAR CLEANING WARNING To reduce the risk of fire, electric shock, or injury to persons when using this appliance, follow basic precautions, including the following: yy Unplug the Styler before cleaning to avoid the risk of electric shock. Failure to follow this warning can cause serious injury, fire, electrical shock, or death. yy Never use harsh chemicals, abrasive cleaners, or solvents to clean the Styler. They will damage the finish.
MAINTENANCE 39 1 Clean the exterior of the tanks with a wet cloth. 2 Use a cleaning brush or detergent made exclusively for water tanks to clean the inside of the water tanks. These can be found online or at a local RV and camping store. Rinse tanks thoroughly after cleaning with detergent to remove any residue. 3 Make sure the drainage nozzle connected to the water drain tank and the water supply hole connected to the water supply tank are not clogged.
TROUBLESHOOTING TROUBLESHOOTING FAQS: FREQUENTLY ASKED QUESTIONS Q: What are aroma sheets and how do I use them? A: You can use your favorite brand of dryer fabric softener sheets in the aroma filter to infuse items with a refreshing aroma. The sheets will not soften garments or reduce static. To use the aroma filter, add a softener sheet before running a cycle. Dispose of the softener sheet at the end of the cycle. For best performance, clean the aroma filter after every 5-7 uses.
TROUBLESHOOTING 41 BEFORE CALLING FOR SERVICE Your appliance is equipped with an automatic error-monitoring system to detect and diagnose problems at an early stage. If your appliance does not function properly or does not function at all, check the following before you call for service. Operation Problem Possible Cause Solutions Smoke comes out when the door is opened Door is opened during operation It is normal for steam or hot air to escape if the door is opened during operation.
TROUBLESHOOTING Operation Problem Control panel won’t respond The cycle won’t start Possible Cause Solutions Control panel or button has dirt on it Dirt or foreign objects on the control panel will interfere with the operation of the buttons. Clean the control panel. Control panel is locked Disable the Control Lock function. See Locking the Controls, page 34. Start/Pause was not touched after the cycle was set. Touch Start.
TROUBLESHOOTING 43 Performance Problem Possible Cause Solutions Wrinkles at back of neck after cycle Item too large for hanger or Use the right size hanger for the item fabric too delicate so the fabric won't bunch up and cause wrinkles. Some fabrics are delicate and will bunch around the hanger no matter what you do. Use the shelf for lingerie and other delicate items.
SMART DIAGNOSIS SMART DIAGNOSIS Should you experience any problems with your appliance, it has the capability of transmitting data to your smart phone using the LG Smart Styler application or via your telephone to the LG Customer Information Center. Smart Diagnosis™ cannot be activated unless your appliance is turned on by pressing the Power button. If your appliance is unable to turn on, then troubleshooting must be done without using Smart Diagnosis™.
WARRANTY 45 WARRANTY NOTE yy When disposing of the appliance, cut off the mains cable, destroy the plug and disable the door lock to prevent children being trapped inside. What Is Not Covered: • Service trips to your home to teach you how to use the product. • If the product is connected to any voltage other than that shown on the rating plate. • If the fault is caused by accident, neglect, misuse or Act of God.
MEMO
MEMO 47
