OWNER’S MANUAL SH7 SMART Hi-Fi AUDIO Wireless Multi-room Sound Bar To view the instructions of advanced features, visit http://www.lg.com and then download Owner’s Manual. Some of the content in this manual may differ from your unit. MODEL SH7 www.lg.com Copyright © 2016-2017 LG Electronics.
Getting Started Safety Information 1 CAUTION Getting Started RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Getting Started 3 This device is equipped with a portable battery or accumulator. 1 Getting Started Safety way to remove the battery from the equipment: Remove the old battery or battery pack, follow the steps in reverse order than the assembly. To prevent contamination of the environment and bring on possible threat to human and animal health, the old battery or the battery put it in the appropriate container at designated collection points.
Table of Contents Table of Contents 27 36 37 37 38 – Connecting the speaker to your Network via the Wi-Fi Setup Method (iOS) Connecting the speakers to your Home Network (Additional) – Connecting the additional speaker to your network with a LAN cable – Connecting the additional speaker to your network via the Wi-Fi Setup Method Using the Bridge – Use as a root device (wired to the home router) – Use as a wireless extender Using Media Server for PC – Music Flow PC Software for windows – Nero MediaHom
Table of Contents 56 57 57 57 58 58 59 59 59 59 59 59 59 60 60 60 – Using your TV remote control – Turn off the sound temporarily – Sleep timer setting – Auto power down – AUTO POWER On/Off – Auto Display Off / Dimmer Sound adjustment – Adjust volume level automatically – Adjust the Treble/Bass/Sub-woofer – Night mode Standby mode – Standby mode – Network standby mode – Bluetooth standby mode Reset the Speaker – Resetting the speaker 4 Troubleshooting 61 61 62 63 63 Troubleshooting – General – Network
Getting Started Main Features 1 Introduction Getting Started Made for iPod/iPhone/iPad or Android device Enjoys music from iPod/iPhone/iPad or Android device with simple connection. Symbol used in this manual ,,Note Indicates special notes and operating features. >>Caution LG Sound Sync Indicates cautions for preventing possible damages from abuse. Controls volume level of this unit by the remote control of your LG TV that is compatible with LG Sound Sync.
Getting Started 7 Front panel 1 Getting Started A LED indicator Shows connection status. D The buttons are located on the rear. B Display window C Remote sensor Rear panel HDMI OUT (TV ARC) A 1/! (Standby/On) HDMI IN LAN D PORTABLE IN connector F (Function): Selects the function and input source. (OPTICAL / HDMI IN / WI-FI / BT READY / LG TV / PORTABLE) E USB (Service only) : S/W download connector -/+ (Volume) G HDMI IN (Wi-Fi): Connects initial MUSICflow product to your network wirelessly.
Getting Started Remote control • • • • • • • • • • • • • • a• • • • • • • • • • • • • • 1 (Power) : Switches the unit ON or OFF. / Switches to the standby mode. F : Selects the function and the input source. 1 SOUND EFFECT : Selects a sound effect mode. Getting Started (Mute) : Mutes the sound. : Set Night mode to On to reduce the sound intensity and improve fineness and softness. : Adjusts sound level of Treble, Bass and Subwoofer. VOL o/p : Adjusts speaker volume.
Getting Started Installing the sound bar You can hear the sound by connecting the unit to the other device : TV, Blu-ray disc player, DVD player, etc. Mounting the main unit on a wall You can mount the main unit on a wall. You can place the wireless subwoofer anywhere in your room. But it is better to place the subwoofer near the main unit. Turn it slightly toward the center of the room to reduce the wall reflections.
Getting Started 1. Match the TV’s BOTTOM EDGE of Wall bracket install guide with the bottom of TV and attach to the position. 5. Put the unit on the brackets to match screw holes on the bottom of the unit. TV 1 Getting Started 6. Fix the unit with the screws firmly. 2. When you mount it on a wall (concrete), use the wall plugs. You should drill some holes. A guide sheet (Wall bracket install guide) is supplied to drill. Use the sheet to check the point to drill.
Connecting 11 Organizing cables Organize the cable with cable holder. 1. Attach and fix the cable holder as shown below. 2. Insert cables to the cable holder. Connect the speaker to the power supply with the supplied AC adapter. 1. Connect the supplied AC power cord to the AC adapter. 2. Connect the AC adapter cable to DC IN adapter input. 3. Plug the AC power cord into an AC outlet. LED indicator of wireless subwoofer LED Color Status Green (Blink) The connection is trying.
Connecting 3. If the LED of the wireless subwoofer already blinks in green continually, you can skip this step. Press and hold PAIRING on the back of the wireless subwoofer for more than 5 seconds. Red Green Connecting to your TV Please connect with this unit and TV using the optical digital cable or HDMI cable considering the state of the TV. Using an OPTICAL cable 1. Connect the OPTICAL IN jack on the back of the unit to OPTICAL OUT jack on the TV using an OPTICAL cable.
Connecting 13 LG Sound Sync With wired connection 1. Connect your LG TV to the unit by using an optical cable. You can control some functions of this unit by your TV’s remote control with LG Sound Sync. It is compatible with the LG TV that is supported LG Sound Sync. Make sure of the LG Sound Sync logo on your TV. Optical cable Refer to the TV’s instruction manual for the details of LG Sound Sync. Make one of the following connections, depending on the capabilities of your equipment.
Connecting Using an HDMI cable HDMI cable Checklist If you connect this unit to a TV that supports HDMI CEC and ARC (Audio Return Channel), you can enjoy the TV audio through the speakers of this unit without connecting the optical cable. Some HDMI cables do not support the ARC function, this can result in no sound output. Connect the HDMI OUT (TV ARC) jack on the back of the unit to ARC jack on the TV using an HDMI cable.
Connecting 15 What is SIMPLINK? ARC (Audio Return Channel) function The ARC function enables an HDMI capable TV to send the audio stream to HDMI OUT of the unit. Some functions of this unit are controlled by the TV’s remote control when this unit and LG TV’s with SIMPLINK are connected through HDMI connection. Controllable functions by LG TV’s remote control : Power on/off, volume up/down, etc. LG TV’s with SIMPLINK function has the logo as shown above.
Connecting Additional information for HDMI yy When you connect an HDMI or DVI compatible device make sure of the following: - Try switching off the HDMI/DVI device and this player. Next, switch on the HDMI/DVI device and leave it for around 30 seconds, then switch on this player. 2 - The connected device’s video input is set correctly for this unit. Connecting - The connected device is compatible with 720 x 576p, 1280 x 720p, 1920 x 1080i or 1920 x 1080p video input.
Connecting 17 For enjoying both sound and picture PORTABLE IN connection You can enjoy both sound and picture from the external device you connect. 2 Connecting HDMI OUT (TV ARC) Listening to music from your portable player The unit can be used to play the music from many types of portable players or external devices. 1. Connect HDMI IN jack on the back of the unit to HDMI OUT jack on the external device such as Blu-ray disc player, DVD player, etc. 2.
Connecting OPTICAL IN connection Connect an optical output jack of external devices to the OPTICAL IN jack. Optical cable 2 Connecting To the optical output jack of external device 1. Connect the OPTICAL IN jack on the back of the unit to optical out jack of your TV (or digital device etc.) 2. Select the input source to OPTICAL by pressing F on the remote control or F on the unit until the function is selected. 3. Listen to sound from the connected device.
Connecting 19 Initial Multi-Room Setup When installing the MUSICflow product for the first time, you can choose two types of connection as below. Wired connection (MUSICflow Mesh Network Connection) Then you can connect the additional MUSICflow products (Optional) to your home network wirelessly. Refer to “Connecting the speakers to your Home Network (Additional)” on page 30. Through Apple “App Store” or Google “Play Store” 1. Tap the Apple “App Store” icon or Google “Play Store” icon. 2.
Connecting ,,Note yy Make sure that your smart device is connected to the internet. 3. Select [Connect product] to install the speaker you’ve purchased. yy Make sure that your smart device has a scanning application. If you don’t have, download it from Apple “App Store” icon or Google “Play Store”. 2 Connecting Starting with Music Flow Player app When you launch Music Flow Player app for the first time, the terms of use and Chromecast Service appear on the screen. 1.
Connecting 21 Connecting the speaker to your Home Network Using a wired network provides the best performance, because the attached devices connect directly to the network without radio frequency interference. Simple Connection (EZ Setup) Preparation yy For Simple Connection, Wi-Fi network condition is needed. yy Make sure that the Bluetooth setting on your smart device in on. yy Simple Connection is supported by Bluetooth Ver 4.0 (or higher).
Connecting Connecting the speaker to your network with a LAN cable Connection overview Broadband service 2 Connecting 4. After typing password, tap [Next]. Router LAN 5. Tap [Finish] to finish making the connection. After finishing, TV connection screen is displayed. Follow the direction on the screen.
Connecting 23 1. Turn on the unit by using 1 on the remote control or 1/! on the unit. The LED indicator starts to blink in white. 2. On your smart device, launch Music Flow Player app. Select [Connect product] to install the speaker. Plug in the desired device, and tap [Next]. 5. Connect one end of the LAN cable to the speaker’s LAN port and connect the other end to your wireless router. Wait a moment until the LED indicator stops blinking and stays white. 2 3.
Connecting (If there is an update) 8. This application is checking the Version of software of your speaker and then shows the version. Connecting the speaker to your Network via the Wi-Fi Setup Method (Android) Connection overview Broadband service 2 Connecting Router Select [Next] after checking the version information. ,,Note yy You cannot use the speaker without a router. When using the wired router, you can control the speaker with Music Flow PC Software.
Connecting 25 1. Turn on the unit by using 1 on the remote control or 1/! on the unit. The LED indicator starts to blink in white. 6. Press the button on the unit. Then the LED indicator blinks in white and red alternately. 2. On your smart device, launch Music Flow Player app. Select [Connect product] to install the speaker. Plug in the desired device, and tap [Next]. 2 3. Select the product you want to connect and tap [Next] on the screen. 8.
Connecting 9. Then select [Next] on the screen. (If there is an update) 11. This application is checking the Version of software of your speaker and then shows the version. 2 Connecting Select [Next] after checking the version information. ,,Note If the speaker fails to connect to your network or its network connection operates abnormally, place the speaker closer to your router and try again. 10. Select [Finish] to complete the connection.
Connecting 27 Connecting the speaker to your Network via the Wi-Fi Setup Method (iOS) Connection overview 1. Turn on the unit by using 1 on the remote control or 1/! on the unit. The LED indicator starts to blink in white. 2. On your smart device, launch Music Flow Player app. Select [Connect product] to install the speaker. Plug in the desired device, and tap [Next]. Broadband service 2 Connecting Router 3. Select the product you want to connect and tap [Next] on the screen. 4.
Connecting 6. Press the button on the unit. Then the LED indicator blinks in white and red alternately. 2 8. On your iOS device, go to iOS setting -> Wi-Fi setting and select “MusicFlow_Setup” to connect. Connecting 7. Then select [Next] on the screen. ,,Note yy If “MusicFlow_Setup” is not on the list, scan for available Wi-Fi networks again. yy When your smart device is connected to “MusicFlow_Setup”, you cannot use the internet. 9.
Connecting 29 10. Then select [Next] on the screen. Notes on Network Connection yy Many network connection problems during set up can often be fixed by re-setting the router. After connecting the speaker to the home network, quickly power off and/or disconnect the power cable of the home network router or cable modem. Then power on and/or connect the power cable again. 11. Then select [Next] on the screen. yy The wireless network operate at 2.
Connecting yy You need to turn the speaker’s power off and on again if you restart the router. yy You need to perform a factory set and setup the network connection for speaker, if you install new router. yy If you use other characters than the english alphabet or digits for the SSID name of your access point or wireless router, it may be displayed differently. 2 Connecting the speakers to your Home Network (Additional) You can enjoy the music with multiple speakers and single smart device you have.
Connecting 31 1. Connect the speaker (Main) to your network. Refer to “Connecting the speaker to your Home network” on page 21. 4. Plug in the desired device, and tap [Next]. 2. On your smart device, select the Music Flow Player app. Tap the button. 2 3. Select the [Add Speaker] on the side menu. 6. Select [Wired connection] on the screen. ,,Note You can also add another speaker by using button on the screen of [Connected Speakers]. Connecting 5.
Connecting 7. Connect one end of the LAN cable to the speaker’s ETHERNET port and connect the other end to your wireless router. Wait a moment until the LED indicator stops blinking and stays white. Connecting the additional speaker to your network via the Wi-Fi Setup Method Connection overview Broadband service 2 Connecting Router LAN cable 8. Then select [Next] on the screen. Speaker (Main) Speaker (Add) 9. Select [Finish] to complete the connection.
Connecting 33 1. Connect the speaker (Main) to your network. Refer to “Connecting the speaker to your Home network” on page 21. 4. Select the product you want to connect and tap [Next] on the screen. 2. On your smart device, select the Music Flow Player app. Tap the button. 2 Connecting 5. Select [Wireless connection] on the screen. 3. Select the [Add Speaker] on the side menu. 6. Press the ADD button on the rear of the speaker Network status LED blinks red. (Add).
Connecting 7. Then select the [Next] on the screen. Using the Bridge Bridge (R1) extends a range of use of speakers. Please purchase it separately if you want to use. Use as a root device (wired to the home router) 2 Connecting If there is no speaker with wired connection to the router 8. Select [Finish] to complete the connection. When your home router is located too far from any speaker location that is to be connected via wired mode, connect the Bridge (R1) to your home router with LAN cable.
Connecting 35 3. Select the [Add Speaker] on the side menu. 6. Select [Finish] to complete the connection. 2 5. Following the instruction on Music Flow Player app, connect the Bridge (R1) and the router with LAN cable. Wait a moment until Network status LED stops blinking and stays white. Bridge (R1) And then select [Next]. 7. Connect the speaker to Bridge (R1). Refer to “Connecting the speakers to your Home Network (Additional)” on page 32. Connecting 4.
Connecting Use as a wireless extender 3. Select the [Add Speaker] on the side menu. If there is at least one speaker with wired connection to the router When you want to expand Music Flow mesh network coverage, add the Bridge (R1) to your home network. 2 Connecting Bridge 4. Select the Bridge and tap [Next] on the screen. 1. Attach the power cord to the power port on the rear of the Bridge (R1) and then plug the power cord into an electrical outlet. 2.
Connecting 37 6. Follow the instruction on Music Flow Player app and tap [Next] on the screen. Using Media Server for PC Media server Software allows users to access audio files stored in media server and enjoy them on this speaker via home networking. Before connecting to PC to play a file, Media server Software should be installed on your PC. Make sure that wireless network environment using a router is installed at your home. 7. Select [Finish] to complete the connection.
Connecting ,,Note yy You might close firewalls and Anti-Virus programs on your PC while installing Music Flow PC Software. yy The Music Flow PC Software is a customized software edition only for sharing files and folders to this speaker. 2 yy If you want a full explanation about Music Flow PC Software, click the question marked icon on home menu. Connecting System requirements (Windows PC) yy CPU : Intel® 2.
Connecting 39 System requirements (Macintosh) yy Mac OS X 10.5 (Leopard) or 10.6 (Snow Leopard) yy Macintosh computer with an Intel x86 processor yy Hard drive space: 200 MB hard drive space for a typical installation of Nero MediaHome standalone yy Memory: 256 MB RAM Sharing music files This parts explains the procedure for selecting the shared folders on your computer. 1. Double-click the “Nero MediaHome 4 Essentials” icon. 2.
Operating Enjoying the Music with Music Flow Player app Overview of Home menu Launch Music Flow Player app on your smart device. The [Home] appears. With Music Flow Player app, you can play music in your smart device. ,,Note yy For more detailed instruction about Music Flow Player app, switch on the [User Guide] in [Settings] > [General] on the side menu. yy Some of the content in this part may differ from Music Flow Player app depending on the application’s version. 3 Operating Preparation 1.
Operating 41 Edit the Online streaming Service list Overview of the side menu 1. Launch Music Flow Player app on your smart device. The [Home] appears. 1. Launch Music Flow Player app on your smart device. The [Home] appears. 2. Tap the [EDIT] menu. 2. Tap the button. 3 yy Select the checkbox of the Online service you want to see on Home. yy Drag upwards or downwards to change the order of the Online service. yy Tap the , add the online services.
Operating Playing a song 5. Select the desired song. Then selected song is displayed and played. 1. Launch Music Flow Player app on your smart device. The [Home] appears. 2. Tap the button. ,,Note 3 Operating 3. Side menu appears. Select the [My Phone] on the side menu. 4. Select the desired album. If the speaker is not selected, the selecting speaker pop-up appears. Select a desired speaker.
Operating 43 Managing a playlist Overview of Playback On an album screen, tap the [ ] of the desired song. The pull down menu appears. You can confirm and adjust various information on the playback screen. 3 Displays current playing music. b - Repeats the desired contents. Every time you click it, the state changed in the (Repeat One) (Repeat All) (Repeat Off) order. - Shuffles the music on the list. Music will be played in random order. Adjusts playback. c a Play next – Selects music to play next.
Operating Selecting Sound effect Sound Effect Description This speaker has a number of pre-set surround sound fields. You can select a desired sound mode by tapping [ ]. ASC The displayed items for the equalizer may be different depending on sound sources and effects. Analyzes the property of input sound and provides the sound optimized for the content in real time. Standard You can enjoy optimized sound. Cinema You can enjoy more immersive and cinematic surround sound. 1.
Operating 45 Different ways of listening to music There are a number of differing ways of listening to music : Group, Surround and Seamless playbacks. ,,Note Group Playback You can group multiple speakers linked to the Music Flow Player app and play the same music through all the connected speakers in the same group. 1. Select [Connected Speakers] on the side menu of Music Flow Player app.
Operating 3. Grouping option appears. Tap the checkbox to select the speaker you want to play with. Then select [OK]. Surround Sound Mode (Home Cinema Mode) Simply add a LG MUSICflow sound bar to your network and synchronize it with your LG MUSICflow speakers to enjoy a home cinema system experience. 1. Select [Connected Speakers] on the side menu of Music Flow Player app. 3 Operating 4. The speakers is ready to group playback. 2. Connected speakers appear. Select the [ ] on the speaker.
Operating 47 3. Surround environment option appears. Select the left and right speakers by tapping connected speakers. Then select [OK]. ,,Note yy It is recommended to set the surround speakers to same models. yy The weak signal because of the long distance between speakers or wireless router and signal interference may cause abnormal playback. yy Depending on your wireless environment, the grouping may be broken.
Operating Seamless playback You can easily change the playing speaker from your smart device or the speaker to the another speaker without pause. Changing playing speaker from a smart device to a speaker To use Seamless playback, you have to set up Auto Music Play to On. (Page 53) ,,Note yy It is not supported when you go out of the house with your smart device. yy Wi-Fi function on smart device must be turned on. 3 yy If the source is Portable In and Bluetooth, seamless play is not supported.
Operating 49 Setting the Speaker with Music Flow Player app With Music Flow Player app, you can set the connected speaker in your smart device. ,,Note yy For more detailed instruction about Music Flow Player app, switch on the [User Guide] in [Settings] > [General] on the side menu. yy Some of the content in this part may differ from Music Flow Player app depending on the application’s version. a General – Sets for easier use of the speaker. b Speakers – Sets connected speaker.
Operating [Speakers] Menu You can adjust speakers connected to your network. a Rename – Renames the speaker. b Speaker LED – Turns on or off speaker’s LED indicator. c IP Info. - Shows the IP address of the speaker. Compressed sound transmission – Adjusts d the compression of audio source according to network status. 3 Operating e DRC – Turns on or off DRC function. (Page 56) f Night – Turns on or off Night Mode function. (Page 59) g Auto Volume On/Off – Turns on or off Auto Volume function.
Operating 51 [Alarms/Sleep Timer] Menu [Account management] Menu Turns on and off the speaker at a designated time. Manages online streaming service. Alarms [Time Zone] Menu Speaker will let you know when it is time. Deletes selected alarm. Adds new alarm. Sleep Timer Sets a time to automatically turn off the speaker. 1. Select the speaker to set timer on [Sleep Timer] in the [Alarms/Sleep Timer] menu. Automatic Time zone It offers to use network provided time.
Operating [Advanced Settings] Menu Mesh Network Channel If normal playback or group playback is not smooth using multiple speakers including wireless speaker connection, changed the mesh network channel to improve network speed. 1. Select the [Settings] -> [Advanced Settings] option. ,,Note yy The speaker is disconnected temporarily during the channel changing. yy If you changed the channel when the speaker turned off, turn on and add it again.
Operating 53 Auto Music Play Sensitivity Settings You can easily change the rendering device from your smart device or a speaker to another speaker by approaching your smart device to the desired speaker. Sets the operating distance of Auto Music Play between the speaker and your smart device to adjust sensitivity of Bluetooth(BLE). yy Your smart device should support bluetooth (BLE). yy This function is subject to the smart device capability and the Wi-Fi network status.
Operating [Chromecast] Menu 2. Starts the software update. Learn how to cast Shows how to use Chromecast. Chromecast enabled apps Shows available apps on Chromecast. Cast Groups Select [Learn about Cast Groups] or [How to cast to a group] to show the selected information. ,,Note 3 Operating To use Cast Groups, install Google Home application. Download the application from Apple “App Store” or Google “Play Store”.
Operating 55 Using a Bluetooth Wireless Technology 1. Select the Bluetooth function by using F on the remote control or F on the unit until the function is selected. Appears “BT” and then “BT READY” in display window. About Bluetooth 2. Operate the Bluetooth device and perform the pairing operation. When searching for this speaker on your Bluetooth device, a list of the devices found may appear in the Bluetooth device display depending on the type of Bluetooth device.
Operating ,,Note Other operations -- When you restart this unit. DRC (Dynamic Range Control) yy This unit supports Bluetooth auto pairing. However it does not operate in the case below: -- When you disconnect this unit by yourself. -- When you disconnect this unit on the connected Bluetooth device. yy The sound may be interrupted when the connection is interfered with by the some other electronic wave. yy You cannot control the Bluetooth device with this unit.
Operating 57 ,,Note Auto power down yy Supported TV brands LG Panasonic Philips Samsung Sharp Sony Toshiba Vizio yy Make sure that the sound output of your TV is set to [External speaker]. yy Depending on the remote control, this function may not work well. yy This function does not operate on LG TV’s magic remote control. yy This function may not work well when some TV control functions such as HDMI CEC, SIMPLINK and LG Sound Sync set to ON.
Operating AUTO POWER On/Off Auto Display Off / Dimmer This unit automatically turns on and off by an input source : Optical. Press and hold AUTO POWER on the remote control for about 3 seconds, “ON - AUTO DISPLAY” appears and Auto Display off function is turned on. (Default: ON) When you turn on your TV or an external device connected to this unit, this unit recognizes the input signal and selects the optical function. You can hear the sound from your device.
Operating 59 Sound adjustment Adjust volume level automatically This unit supports Auto volume function that automatically adjusts the volume level. When the output sound is too loud or too low, press AUTO VOL on the remote control. So you can enjoy the sound with appropriate levels. To cancel this function, press the button again while “ON” is displayed. You can adjust the sound level of Treble, Bass and Subwoofer as your preference. TREBLE/BASS : -5 dB to 5 dB SUBWF (Subwoofer) : -15 dB to 6 dB 1.
Operating Bluetooth standby mode If the Bluetooth standby mode is set to ON, the speaker switches Bluetooth standby mode when is turned off. When you turn on the main unit in the Bluetooth standby mode, Bluetooth and LG TV are able to connect even if network is not connected. ,,Note yy Adjust volume level of the main unit to minimum. And then, press and hold VOL and DRC on the remote control for about 3 seconds. The speaker switches Bluetooth standby mode.
Troubleshooting 61 Troubleshooting General Symptoms Cause & Solution The unit does not work properly. yy Turn off the power of this unit and the connected external device (TV, Woofer, DVD-player, Amplifier, etc.) and turn it on again. yy Disconnect the power cord of this unit and the connected external device (TV, Woofer, DVD-player, Amplifier, etc.) and then try connecting again. yy Previous setting may not be saved when device power is shut off. The power does not turn on.
Troubleshooting Symptoms Cause & Solution When you feel the output sound of the unit is low. Check the details below and adjust the unit according to them. yy Switch [ON] state of DRC function to [OFF] by using remote controller. yy With the sound bar connected with TV, change the AUDIO DIGITAL OUT setting on TV Setup Menu from [PCM] to [AUTO] or [BITSTREAM].
Troubleshooting 63 Application and PC Software Symptoms Cause & Solution Music Flow Player app doesn’t work properly. Does an error occur when accessing the app? yy Make sure that your smart device is compatible with the app. yy Make sure that the Music Flow Player app is the latest version. yy Make sure that the speaker’s front LED turns from red to white. Music Flow PC Software doesn’t work properly.
Appendix File requirement Available File extensions : “.mp3”, “.wma”, “.flac”, “.m4a”, “.aac”, “.ogg”, “.wav” Sampling frequency: within 32 to 48 kHz (mp3, wma), up to 192 kHz/24 bit (flac) Bit rate: up to 320 kbps (mp3, wma) yy The file requirements are not always compatible. There may have some restrictions by file features and media server’s ability. The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc.
Appendix 65 Specifications General Power requirements 25 V 0 1.52 A (AC adapter) Refer to main label. Power consumption Networked standby : 5.8 W (If all network ports are activated.) How to disconnect the wireless network connection or the wireless device Press and hold the button until you hear the beep sound twice. AC adapter Model : DA-38A25 Manufacturer: Asian Power Devices Inc. Input: 100 - 240 V ~ 50 - 60 Hz Output: 25 V 0 1.52 A Dimensions (W x H x D) Approx.
Appendix Wireless subwoofer Power requirements Refer to the main label on the subwoofer. Power consumption 33 W Type 1 Way 1 Speaker Impedance 3Ω Rated Input Power 200 W Max. Input Power 400 W Dimensions (W x H x D) Approx. 171 mm x 320 mm x 252 mm Net Weight Approx. 4.3 kg System LAN port Ethernet jack x 1, 10 BASE-T/100 BASE-TX Wireless LAN (Internal antenna) Integrated IEEE 802.11n (Draft 2.0) wireless networking access, compatible with 802.11a/b/g/n Wi-Fi networks.
Appendix 67 Handling the Speaker When shipping the speaker Please save the original shipping carton and packing materials. If you need to ship the speaker, for maximum protection, re-pack the speaker as it was originally packed at the factory. Keeping the exterior surfaces clean yy Do not use volatile liquids such as insecticide spray near the speaker. yy Wiping with strong pressure may damage the surface. yy Do not leave rubber or plastic products in contact with the speaker for a long period of time.
Appendix TERMS OF USE These Terms of Use apply to those individuals and groups who use LG’s Multiroom Speaker (LG Mutiroom Speaker), any software(s) associated with LG Multiroom Speaker, this application and any services associated this application (collectively “LG Software”). They set out LGE’s responsibilities to you as well as identifying the “dos” and “don’ts” that you should be aware of when you use the LG Software. LG Software is proprietary software owned by LG Electronics Inc.
Appendix 69 services or content provided by third party providers. We may impose limits on the use of or access to certain third party content, application or services, in any case without notice or liability. We expressly disclaims any responsibility or liability for any change, interruption, disabling, removal of or suspension of any content, application or service made available through this LG Software.
Appendix OPEN SOURCE SOFTWARE NOTICE INFORMATION To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.
