User guide

Using Multi-Room10
Using Multi-Room
3
Step 3. Initial Multi-Room Setup
When installing the MUSIC ow product for the rst time, you can choose two types of connection as below.
Option 1. Wired connection (MUSIC flow Mesh Network Connection)
Connect one of MUSIC ow products (sound bar, speaker or bridge) to the home router using LAN cable.
Then you can connect the additional MUSIC ow products (Optional) to your home network wirelessly (MUSIC
ow Mesh Network). Refer to “Step 4. Add Speakers (Optional)” on page 12.
If you have a bridge
Bridge (Wired Connection)
à
Sound bar (Add speaker)
à
Other speakers (Add speaker)
If you do not have a bridge
Sound bar (Wired Connection)
à
Other speakers (Add speaker)
LAN Cable
Simple Setup Guide (Wired Connection)
1. Ensure that your smart device is connected to your Wi-Fi network.
2. Select the product you want to connect.
3. Launch Music Flow Player App and follow “Wired Connection” instructions on set-up wizard.
4. Connect LAN cable from router to any one of the MUSIC flow products (sound bar, speaker or bridge).
5. Power on the MUSIC flow product and wait until you see a white LED become solid.
6. If you install successfully, update speaker software to the latest:
[Home
à
Settings
à
Version Info.]
m Tip
Separated from the router’s Wi-Fi environment, composes wireless network among MUSIC ow products.
Using MUSIC ow mesh network, Wireless coverage is expanded, which offers stable music streaming service.
In the below case, MUSIC ow Mesh Network connection is recommended.
1. When the Wi-Fi coverage cannot reach whole house because home router performance is unstable.
(In case that your home router supports only 802.11 b/g 2.4 GHz.)
2. When you want to enjoy MUSIC flow system in stable wireless network environment.
3. When you want to use in below mode.
1) Multi-Room & Group-play Mode
2) Home Cinema Mode