User guide

Appendix 21
Appendix
6
About Status LED’s Condition
Color Status
(Off) (White)
The unit is waiting for network connection
Network Status
(White) (Red)
The initial unit is being connected to the network
( button is pressed)
(White)
The unit is connected to the network
(Off) (Red)
The additional unit is being connected to the network
( button is pressed)
(Dimmed White)
Network standby mode
Standby Mode Status
(Red)
Standby mode
,
Note for Status LED’s Condition
y
When you set the group at rst, Network status LED turns green.
y
The additional groups are set, the Network status LED color is changed in group order.
(
(Green)
>
(Magenta)
>
(Cyan)
>
(Blue)
>
(Yellow)
)
y
If the grouped speakers switch to the network standby mode, the brightness of Network status LED gets
dark.
Specification
AC adapter
y
Model : DA-38A25
y
Manufacturer: Asian Power Devices Inc.
y
Input: 100 - 240 V ~ 50 - 60 Hz
y
Output: 25 V
0
1.52 A
Power consumption: Refer to main label.
y
Networked standby : 5.8 W
(If all network ports are activated.)
How to disconnect the wireless network
connection or the wireless device
Press and hold the “ (Add)” button until you hear
the beep sound twice.
Dimentions (W x H x D): Approx. 1060 mm x
53 mm x 85 mm
Net Weight: Approx. 2.8 kg
Amplier (Total RMS Output power): 360 W
y
Design and specications are subject to change
without notice.
OPEN SOURCE
SOFTWARE NOTICE
INFORMATION
To obtain the source code under GPL, LGPL, MPL, and
other open source licenses, that is contained in this
product, please visit http://opensource.lge.com.
In addition to the source code, all referred license
terms, warranty disclaimers and copyright notices are
available for download.
LG Electronics will also provide open source code to
you on CD-ROM for a charge covering the cost of
performing such distribution (such as the cost of
media, shipping and handling) upon email request
to [e-mail]. This offer is valid for three
(3) years from the date on which you purchased the
product.