SIMPLE MANUAL 3D Blu-ray™ Home Theater Please read this manual carefully before operating your set and retain it for future reference. HB806TM (HB806TM, SH86TM-S/ C, SH85TM-W) P/NO: MFL67100727 HB806TM-F2_BINDLL_SIM_ENG_0727.
Getting Started Safety Information 1 CAUTION Getting Started RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Getting Started 3 This device is equipped with a portable battery or accumulator. 1 Getting Started Safety way to remove the battery or the battery from the equipment: Remove the old battery or battery pack, follow the steps in reverse order than the assembly. To prevent contamination of the environment and bring on possible threat to human and animal health, the old battery or the battery put it in the appropriate container at designated collection points.
Getting Started Supplied Accesorries Network Software Update 1 Getting Started Network update notification Video cable (1) Speaker cables (6) Remote control (1) Battery (1) From time to time, performance improvements and/or additional features or services may be made available to units that are connected to a broadband home network. If there is new software available and the unit is connected to a broadband home network, the player will inform you about the update as follows. Option 1: 1.
Table of Contents Table of Contents 1 Getting Started 2 4 4 4 6 6 7 8 9 10 Safety Information – Supplied Accesorries Network Software Update – Network update notification Introduction – Playable Discs and symbols used in this manual – File requirement Remote control Front panel Rear panel 2 Connecting 11 12 12 Positioning the system Speaker Connection – Attaching the speakers to the player 3 System Setting 13 13 13 14 Settings – Adjust the Setup Settings – Resolution Setting – Wired Network Setu
Getting Started Introduction 1 Playable Discs and symbols used in this manual Getting Started Media/Term Logo Symbol e Description yy Discs such as movies that can be purchased or rented. yy “Blu-ray 3D” discs and “Blu-ray 3D ONLY” discs. yy BD-R/RE discs that are recorded in BDAV format. Blu-ray y u i r DVD-ROM yy BD-R/RE discs that contain Movie, Music or Photo files. yy ISO 9660+JOLIET, UDF and UDF Bridge format yy Discs such as movies that can be purchased or rented.
Getting Started 7 File requirement Movie files Disc, USB DLNA 1 File Extension Codec Format Audio Format Subtitle “.avi”, “.divx”, “.mpg”, “.mpeg”, “.mkv”, “.mp4”, “.asf”, “.wmv”, “.m4v” (DRM free) DIVX3.xx, DIVX4.xx, DIVX5.xx, DIVX6.xx (standard playback only), XVID, MPEG1 SS, H.264/MPEG-4 AVC, MPEG2 PS, MPEG2 TS, VC-1 SM (WMV3) Dolby Digital, DTS, MP3, WMA, AAC, AC3 SubRip (.srt / .txt), SAMI (.smi), SubStation Alpha (.ssa/.txt), MicroDVD (.sub/.txt), VobSub (.sub), SubViewer 1.0 (.
Getting Started Remote control 1 Getting Started • • • • • • a • • • • • • • • • • • • c • • • • • • RADIO&INPUT (P): Changes input mode. SPEAKER LEVEL: Sets the sound level of desired speaker. MARKER: Marks any point during playback. SOUND EFFECT: Selects a sound effect mode. 1 (POWER): Switches the player ON or OFF. B (OPEN/CLOSE): Opens and closes the disc tray. SEARCH: Displays or exits the search menu. INFO/DISPLAY (m): Displays or exits On-Screen Display.
Getting Started 9 Front panel 1 Getting Started a 1/' (POWER) Button b R (OPEN/CLOSE) T (PLAY/PAUSE) I (STOP) Y/U (SKIP) FUNC. (Function) Changes the input source or function. HB806TM-F2_BINDLL_SIM_ENG_0727.indd 9 c MIC IN1/2 PORT.
Getting Started Rear panel 1 Getting Started a Speakers connectors e AUX (R/L) IN/VIDEO OUT b Cooling Fan f HDMI OUT (Type A, HDMI™ Connector) Connect to TV with HDMI inputs. c Antenna Connector d OPTICAL IN HB806TM-F2_BINDLL_SIM_ENG_0727.
B C A Connecting G F A D A A Positioning the system E A The following illustration shows an example of positioning the system. Note that the illustrations Ain these instructions differ from the actual unit for explanation purposes. For the best possible surround sound, all the speakers other than the subwoofer should be placed at the same distance from the listening position (A).
Connecting 12 Speaker Connection Attaching the speakers to the player Connect the wires hooked up to the speaker to the unit. 2 Connecting -- To connect the cable to the unit, press each plastic finger pad to open the connection terminals on the unit. Insert the wire and release the finger pad. -- Connect the black stripe of each wire to the terminals marked - (minus) and the other end to the terminals marked + (plus).
System Setting Settings Adjust the Setup Settings You can change the settings of the player in the [Setup] menu. 1. Press HOME (n). 13 Resolution Setting The player provides several output resolutions for HDMI OUT jack. You can change the resolution using [Setup] menu. 1. Press HOME (n). 2. Use A/D to select the [Setup] and press ENTER (b). The [Setup] menu appears. 3. Use W/S to select [DISPLAY] option then press D to move to the second level. 4.
System Setting Wired Network Setup If there is a DHCP server on the local area network (LAN) via wired connection, this player will automatically be allocated an IP address. After making the physical connection, a small number of home networks may require the player’s network setting to be adjusted. Adjust the [NETWORK] setting as follow. 5. The player will ask you to test the network connection. Select [OK] and press ENTER (b) to complete the network connection. 6.
Operating 15 General Playback Playing a Disc ert Using [HOME] menu 1. Press B (OPEN/CLOSE), and place a disc on the disc tray. The home menu appears when you press HOME (n). Use A/D to select a category and press ENTER (b). 2. Press B (OPEN/CLOSE) to close the disc tray. a b c d e f For the most Audio CD, BD-ROM and DVD-ROM discs, playback starts automatically. 3. Press HOME (n). 4. Select [Movie] or [Music] using A/D, and press ENTER (b). 5.
Operating Basic operations for video and audio content On-Screen display To stop playback You can display and adjust various information and settings about the content. Press Z (STOP) while playback. eroy To pause playback 1. While playback, press INFO/DISPLAY (m) to show various playback information. Press M (PAUSE) while playback. Press d (PLAY) to resume playback. To play frame-by-frame (Video) Press M (PAUSE) while movie playback. Press M (PAUSE) repeatedly to play Frame-by-Frame playback.
5 Troubleshooting Troubleshooting 17 Troubleshooting Symptom Cause & Solution The Power does not turned on. yy Plug the power cord into the wall outlet securely. The unit does not start playback. yy Insert a playable disc. (Check the disc type, colour system, and regional code.) yy Place the disc with the playback side down. yy Place the disc on the disc tray correctly inside the guide. yy Clean the disc. yy Cancel the Rating function or change the rating level. The angle cannot be changed.
Troubleshooting Symptom Cause & Solution BD-Live feature does not work. yy The connected USB storage may not have enough space. Connect the USB storage with at least 1GB free space. yy Ensure that the unit is correctly connected to the local area network and can access the internet. yy Your broadband speed may not fast enough to use the BD-Live features. Contact your Internet Service Provider (ISP) and increase the broadband speed is recommended.
Appendix 19 Trademarks and Licenses Blu-ray Disc™, Blu-ray™, Blu-ray 3D™, BD-Live™, BONUSVIEW™ and the logos are trademarks of the Blu-ray Disc Association. Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,392,195; 7,272,567; 7,333,929; 7,212,872 & other U.S. and worldwide patents issued & pending.
Appendix Specifications General Power requirements Refer to main label. Power consumption Refer to main label. Dimensions (W x H x D) Approx. 360 x 59 x 307 mm without foot Net Weight (Approx.) 2.8 kg Operating temperature 5 °C to 35 °C (41 °F to 95 °F) Operating humidity 5 % to 90 % Inputs/Outputs VIDEO OUT 1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1 HDMI OUT (video/audio) 19 pin (Type A, HDMI™ Connector) ANALOG AUDIO IN 2.
Appendix 21 System Laser Semiconductor laser Wavelength 405 nm / 650 nm Signal system Standard NTSC color TV system Frequency response 20 Hz to 20 kHz (48 kHz, 96 kHz, 192 kHz sampling) Signal-to-noise ratio More than 80 dB Total harmonic distortion 0.05 % at 1 W Dynamic range More than 85 dB LAN port Ethernet jack x 1, 10BASE-T / 100BASE-TX Bus Power Supply (USB) DC 5 V 0 500 mA Speakers Front speaker (Left/ Right) Type 2 Way 3 speaker Max.
An extended Owner's Manual that contains information on the advanced features is located on the CD-ROM provided in an electronic version. To read these files, you will need to use a Personal Computer (PC) equipped with a CD-ROM drive. HB806TM-F2_BINDLL_SIM_ENG_0727.