User guide

Industry Canada Statement
This device complies with Industry Canada’s applicable
licence-exempt RSSs. Operation is subject to the following
two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including
interference that may cause undesired operation of
the device.
CAN ICES-3 (B)/NMB-3 (B)
IC Radiation Exposure Statement
This equipment complies with IC radiation exposure limits
set forth for an uncontrolled environment.
This equipment should be installed and operated with
minimum distance 20 cm (7.8 inches) between the
antenna & your body.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE
FOR ANY RADIO OR TV INTERFERENCE CAUSED BY
UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT.
SUCH MODIFICATIONS COULD VOID THE USER’S
AUTHORITY TO OPERATE THE EQUIPMENT.
WARNING
[For product having the wireless function using 5 GHz
frequency bands]
(i) the device for operation in the band 5150–5250
MHz is only for indoor use to reduce the potential for
harmful interference to co-channel mobile satellite
systems;
(ii) for devices with detachable antenna(s), the
maximum antenna gain permitted for devices in the
bands 5250-5350 MHz and 5470-5725 MHz shall
be such that the equipment still complies with the
e.i.r.p. limit;
(iii) for devices with detachable antenna(s), the maximum
antenna gain permitted for devices in the band
5725-5850 MHz shall be such that the equipment
still complies with the e.i.r.p. limits specied for
point-to-point and non-point-to-point operation as
appropriate; and
(iv) the worst-case tilt angle(s) necessary to remain
compliant with the e.i.r.p. elevation mask requirement
set forth in Section 6.2.2(3) shall be clearly indicated.
(devices operating in the band 5250-5350 MHz
with a maximum e.i.r.p. greater than 200 mW)
(v) High-power radars are allocated as primary users (i.e.
priority users) of the bands 5250–5350 MHz and
5650–5850 MHz and that these radars could cause
interference and/or damage to LE-LAN devices.
*MFL69868708*
SIMPLE MANUAL
Sound Bar
ENGLISH
Please read this manual carefully before operating your set
and retain it for future reference.
To view the instructions of advanced features,
visit http://www.lg.com and then download Owner's Manual.
Some of the content in this manual may differ from your unit.
SJ1
MODEL
Copyright © 2017 LG Electronics Inc. All Rights Reserved.
www.lg.com
Front Panel TV Connection
Rear Panel
·························Standby/Standby LED
··························Adjusts Volume
······························ Selects Function
PORTABLE IN ········ Connect to a Portable device
OPTICAL IN · · · · · · · · · · · Connect to an Optical device
DC IN ·················· Connect to the AC adapter
a Connect the sound bar to the TV using
Optical cable.
b Set up [External Speaker (Optical)] on
your TV setting menu.
TV
Additional Device Connection
a Connect to the external device as follows.
TV
(Set-top Box,
Player etc.)
b Set the input source by pressing OPTICAL on
the remote control or pressing F on the unit
repeatedly.
STANDARD/BASS BLAST : Selects the sound effect.
DRC ON/OFF : Makes comfortable sound at Dolby Digital.
AUTO POWER ON/OFF: Automatically turns on by an
input source.
Replacement of battery
Remote control
Additional Information
Specication
Power
consumption
Refer to the main label.
AC adapter
y
Model: NU040A220181
y
Manufacturer:
TCL Technoly Electronics
(Houizhou) Co.,Ltd
y
Input:
100 - 240 V ~ 50 / 60 Hz
1.5 A MAX
y
Output: 22 V
0
1.81 A
Dimensions
(W x H x D)
Approx.
900 mm x 55 mm x 36 mm
(35.4 inches x 2.2 inches x
1.4 inches) With foot
Amplier
(Total RMS
Output power)
40 W RMS
Design and specications are subject to change
without notice.
Wall mounting (Optional)
You can mount the main unit on a wall by using holes
on the rear of the unit. For details, download the online
owner’s manual. http://www.lg.com
a b
dc
BUY :
LG Customer Information Center
1-888-542-2623 CANADA
Register your product Online!
www.lg.com