OWNER’S MANUAL Wireless Sound Bar Please read this manual carefully before operating your set and retain it for future reference. MODEL SJ5 (SJ5, SPJ5-W) *MFL69759840* www.lg.com Copyright © 2017 LG Electronics.
Getting Started Safety Information 1 CAUTION Getting Started RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Getting Started CAUTION concerning the Power Cord NOTICE: For safety marking information including product identification and power supply ratings, please refer to the main label on the bottom or the other surface of the product. This device is equipped with a portable battery or accumulator. Safety way to remove the battery from the equipment: Remove the old battery or battery pack, follow the steps in reverse order than the assembly.
Getting Started OPEN SOURCE SOFTWARE NOTICE INFORMATION Symbols ~ 1 0 Refers to alternating current (AC). Refers to direct current (DC). Getting Started Refers to class II equipment. 1 Refers to stand-by. ! Refers to “ON” (power). Refers to dangerous voltage. To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com.
Table of Contents 5 Table of Contents 1 Getting Started 3 Operating 2 6 6 6 7 8 8 9 10 Safety Information Unique features Introduction – Symbols used in this manual Remote control Front panel Rear panel Installing the sound bar Mounting the main unit on a wall 2 Connecting 23 23 24 24 24 24 24 25 25 26 27 27 12 12 14 14 15 16 18 19 19 20 20 21 21 21 22 Connecting the AC Adapter Wireless subwoofer connection Connecting to your TV – Using an OPTICAL cable – LG Sound Sync – Using an HDMI cable – Ad
Getting Started Unique features 1 Auto power down Getting Started This unit will turn off by itself for energy saving consumption. LG Sound Sync Controls volume level of this unit by the remote control of your LG TV that is compatible with LG Sound Sync. BLUETOOTH® Listens to music stored on your Bluetooth device. Introduction Symbols used in this manual ,,Note Indicates special notes and operating features. >>Caution Indicates cautions for preventing possible damages from abuse.
Getting Started Remote control 7 • • • • • • • • • • • • • • a• • • • • • • • • • • • • • 1 (Power) : Switches the unit ON or OFF. F : Selects the function and the input source. Display USB USB Bluetooth BT HDMI IN HDMI Portable PORT. LG Sound Sync (Wireless) LG TV OPT/HDMI ARC SOUND EFFECT : Selects a sound effect mode. VOL o/p : Adjusts speaker volume. (Night mode) : Turns on or off Night mode. (Mute) : Mutes the sound.
Getting Started Front panel 1 Getting Started A Remote sensor C The buttons are located on the rear. B Display window Rear panel A o/p: (Volume) : Adjusts volume level B DC IN : AC adapter input F (Function) : Selects the function and input source.
Getting Started 9 Installing the sound bar You can hear the sound by connecting the unit to the other device : TV, Blu-ray disc player, DVD player, etc. >>Caution yy For best performance of wireless connection such as Bluetooth or wireless subwoofer, do not install the unit on Metallic furniture because wireless connection communicates through a module positioned on the bottom of the unit. yy Be careful not to make scratches on the surface of the Unit / Subwoofer when installing or moving them.
Getting Started Mounting the main unit on a wall 1 1. Match the TV’s BOTTOM EDGE of Wall bracket install guide with the bottom of TV and attach to the position. You can mount the main unit on a wall. Getting Started >>Caution Because it is difficult to make a connection after installing this unit, you should connect the cables before installation. 2. When you mount it on a wall (concrete), use the wall plugs. You should drill some holes.
Getting Started 11 4. Fix the brackets with screws (A) as shown in the illustration below. 6. Fix the unit with the screws firmly. 1 Getting Started ,,Note Screws (A) and Wall Plugs are not supplied for mounting the unit. We recommend the Hilti (HUD-1 6 x 30) for the mounting. 5. Put the unit on the brackets to match screw holes on the bottom of the unit. ,,Note To detach the unit, perform it in reverse order. >>Caution yy Do not install this unit upside down.
Connecting 2 Connecting the AC Adapter Wireless subwoofer connection Connect the speaker to the power supply with the supplied AC adapter. LED indicator of wireless subwoofer Connecting 1. Connect the supplied AC power cord to the AC adapter. LED Color Status 2. Connect the AC adapter cable to DC IN adapter input. Green (Blink) Attempting to make connection. 3. Plug the AC power cord into an AC outlet. Green The connection is completed.
Connecting 13 Manually pairing wireless subwoofer When your connection is not completed, you can check red LED on the wireless subwoofer and the wireless subwoofer does not make sound. To solve the problem, follow the steps below. 1. Press Pairing button on the rear of the wireless subwoofer. ,,Note yy It takes a few seconds (and may take longer) for the main unit and the subwoofer to communicate with each other and make sounds. yy The closer the main unit and the subwoofer, the better sound quality.
Connecting Connecting to your TV Please connect this unit and the TV using the optical digital cable or HDMI cable considering the capability of the TV. Using an OPTICAL cable 2 Connecting 1. Connect the OPTICAL IN jack on the back of the unit to OPTICAL OUT jack on the TV using an Optical cable. ,,Note yy Before connecting the optical cable, be sure to remove the protection plug cover if your cable has the cover. yy You can enjoy the TV audio through the speakers of this unit.
Connecting 15 LG Sound Sync With wired connection 1. Connect your LG TV to the unit by using an optical cable. You can control some functions of this unit by your TV's remote control with LG Sound Sync. It is compatible with an LG TV that supports LG Sound Sync. Make sure there is an LG Sound Sync logo on your TV. Optical cable Refer to the TV's instruction manual for the details of LG Sound Sync. Make one of the following connections, depending on the capabilities of your equipment.
Connecting With wireless connection Using an HDMI cable 1. Turn on the unit by pressing 1 on the remote control or unit. If you connect this unit to a TV that supports HDMI CEC and ARC (Audio Return Channel), you can enjoy the TV audio through the speakers of this unit without connecting the optical cable. Please refer to your TV user manual when you check HDMI CEC/ARC function of your TV. 2. Select the input source to LG TV by pressing F button on the remote control or unit repeatedly. 2 3.
Connecting 17 ,,Note yy You can enjoy the TV audio through the speakers of this unit. In the case of some TV models, you must select the external speaker option from the TV menu. (For details, reference your TV user manual.) yy Set up the sound output of TV to listen to the sound through this unit : TV setting menu [ [Sound] [ [TV Sound output] [ [External speaker (HDMI ARC)] The ARC function enables an HDMI capable TV to send the audio stream to HDMI OUT of the unit.
Connecting Additional information for HDMI HDMI cable Checklist yy When you connect an HDMI or DVI compatible device make sure of the following: Some HDMI cables do not support the ARC function, this can result in no sound output. - Try switching off the HDMI/DVI device and this unit. Next, switch on the HDMI/DVI device and leave it for around 30 seconds, then switch on this unit. 2 - The connected device’s video input is set correctly for this unit.
Connecting 19 Optional equipment connection For enjoying both sound and picture You can enjoy both sound and picture from the external device you connect. HDMI connection You can enjoy the sound and picture from HDMI connection on external device. HDMI cable You can enjoy the sound from the external device you connect. HDMI cable HDMI cable 1. Connect HDMI IN jack on the back of the unit to HDMI OUT jack on the external device such as Blu-ray disc player, DVD player, etc. 2.
Connecting Optical In connection Portable In connection Connect an optical output jack of external devices to the OPTICAL IN jack. 2 Connecting To the optical output jack of external device Optical cable MP3 player, etc... Portable cable 1. Connect the OPTICAL IN jack on the back of the unit to optical out jack of your external device. 2. Select the input source to OPT/HDMI ARC by pressing F button on the remote control or unit repeatedly.
Connecting 21 USB connection USB device requirement Connect USB memory device to the USB port on the back of the unit. yy Devices which require additional program installation connected to a computer, are not supported. yy Do not extract the USB device while in operation. yy For a large capacity USB, it may take longer than a few minutes to be searched. yy To prevent data loss, back up all data. yy This unit recognizes up to 2000 files. yy The exFAT file system is not supported on this unit.
Connecting Playable file Sampling Frequency MP3 : WMA : OGG : FLAC : 2 within 32 to 48 kHz within 32 to 48 kHz within 32 to 48 kHz 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz and 192 kHz (16 bit/ 24 bit) WAV : 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz and 192 kHz (16 bit/ 24 bit) ,,Note yy Folders and files on the USB are recognized as below.
Operating 23 Basic operations USB operation 1. Connect the USB device to the USB port. 2. Select the input source to USB by pressing F button on the remote control or unit repeatedly. Do this Playback Press dM. Pause During playback, press dM. Skip to the next/ previous file During playback, press V on the remote control to go to the next file. Playing less than 2 seconds, press C on the remote control to go to the previous file.
Operating Other operations AV Sync When receiving audio signals from TV, sound and images may not be matched. In the case, this function can adjust the delay time. 1. Press AV SYNC. 2. Use C/V to scroll up and down through the delay amount, which you can set at anything between 0 and 300 ms. 3 Operating ,,Note yy This function does not operate on USB function. yy You can adjust the delay time by 10 ms. Turn off the sound temporarily Press (Mute) to mute your unit.
Operating 25 Auto power down This unit will turn itself off to save electric consumption if the main unit is not connected to an external device and has not been used for 15 minutes. This unit also turns off after six hours if the Main unit has been connected to another device using the analog input. (Ex : Portable, etc..) How to disconnect the wireless network connection or the wireless device Set up the AUTO POWER ON/OFF function to off and turn off the unit.
Operating Auto function change This unit recognizes input signals such as Optical, Bluetooth, LG TV and Portable and then changes to the suitable function automatically. When an Optical signal comes in When you turn on the external device connected to this unit by an optical cable, this unit changes the function to optical. You can hear the sound from your device.
Operating 27 Using BLUETOOTH® technology About BLUETOOTH Bluetooth is wireless communication technology for short range connection. The sound may be interrupted when the connection has interference from other electronic waves or when you connect Bluetooth in the other rooms. yy Available Devices : Smart phone, MP3, Notebook, etc. yy Version : 4.0 yy Codec : SBC BLUETOOTH Profiles In order to use Bluetooth wireless technology, devices must be able to interpret certain profiles.
Operating 3. When this unit is successfully connected with your Bluetooth device, "PAIRED" Your device's name "BT" appears in the display window in this order. ,,Note yy If it is unavailable to display the device's name on the unit, "_" will be displayed. yy To check the connected device's name, press and hold REPEAT on the remote. The connected Bluetooth device is displayed. 3 4. Listen to music. To play a music file stored on your Bluetooth device, refer to your Bluetooth device’s user guide.
Operating 29 Using BLUETOOTH App ,,Note Install “Music Flow Bluetooth” App through “Google Android Market (Google Play Store)” yy Only Android OS is available to use “Music Flow Bluetooth ” app with this unit. 1. Tap the “Google Android Market (Google Play Store)” icon. yy Additional data charges may occur if installed over 3G/4G, according to your device plan. 2. In the search bar, type in “Music Flow Bluetooth” and then tap search. 3.
Operating ,,Note yy “Music Flow Bluetooth” app will be available in the software version as follow; -- Android O/S : Ver 4.0.3 (or later) yy If you use “Music Flow Bluetooth ” app for operation, there would be some differences between “Music Flow Bluetooth” app and the supplied remote control. Use the supplied remote control as necessary. yy Depending on the Bluetooth device, “Music Flow Bluetooth” app may not work.
Operating 31 Sound adjustment Adjust volume level automatically Setting sound effect This unit supports auto volume function that automatically adjusts the volume level. This system has a number of pre-set surround sound fields. You can select a desired sound mode by using SOUND EFFECT. When the output sound is too loud or too low, press AUTO VOL on the remote control. So you can enjoy the sound with appropriate levels.
Troubleshooting Troubleshooting General PROBLEM CAUSE & CORRECTION yy Turn off the power of this unit and the connected external device (TV, Woofer, DVD-player, Amplifier, etc.) and turn them on again. The unit does not work properly. yy Disconnect the power cord of this unit and the connected external device (TV, Woofer, DVD-player, Amplifier, etc.) and then try connecting again. yy Previous setting may not be saved when device power is shut off. yy The power cord is unplugged.
Troubleshooting 33 PROBLEM The unit does not connect with Bluetooth device CAUSE & CORRECTION yy Turn off the Bluetooth connection lock function. (Refer to the page 28.) Check the details below and adjust the unit according to them. yy With the sound bar connected with TV, change the AUDIO DIGITAL OUT setting on TV Setup Menu from [PCM] to [AUTO] or [BITSTREAM]. When you feel the output sound of the unit is low.
Appendix Trademarks and licenses All other trademarks are trademarks of their respective owners. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by LG Electronics is under license. Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories. 5 Appendix For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited.
Appendix 35 Specifications General Refer to the main label. Power consumption Networked standby : 0.5 W (If all network ports are activated.) AC adapter yy yy yy yy Model : DA-38A25 Manufacturer : Asian Power Devices Inc. Input : 100 - 240 V ~ 50 - 60 Hz 1.2 A Output : 25 V 0 1.52 A Dimensions (W x H x D) Approx.
Appendix Wireless subwoofer Power requirements Refer to the main label on the wireless subwoofer. Power consumption Refer to the main label on the wireless subwoofer. Type 1 Way 1 Speaker Impedance 3Ω Rated Input Power 200 W RMS Max. Input Power 400 W RMS Dimensions (W x H x D) Approx. 171 mm x 320 mm x 252 mm yy Designs and specifications are subject to change without prior notice.
Appendix 37 Maintenance Handling the unit When shipping the unit Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory. Keeping the exterior surfaces clean yy Do not use volatile liquids such as insecticide spray near the unit. yy Wiping with strong pressure may damage the surface. yy Do not leave rubber or plastic products in contact with the unit for a long period of time.