User guide

SIMPLE MANUAL
Please read this manual carefully before operating your set and retain it for future reference.
To view the instructions of advanced features, visit http://www.lg.com and then download
Owner’s Manual. Some of the content in this manual may differ from your unit.
MODEL
SJ8
Copyright © 2017 LG Electronics. All Rights Reserved.
www.lg.com
*MFL69727399*
SJ8
SMART Hi-Fi
AUDIO
Wireless Multi-room Sound Bar
ENGLISH
Front Panel
Rear Panel
DC IN ·····················Connect to AC Adapter.
USB (Service only) ······S/W download connector.
LAN·····························Connect to router.
OPTICAL IN ···········Connect to an optical device
HDMI IN ········Connect to device with HDMI OUT.
HDMI OUT (TV ARC) ············· Connect to a TV.
Subwoofer Connection
Place the wireless subwoofer near the sound bar and
follow steps below.
a Connect the power cord of the sound bar and the
wireless subwoofer to the outlet.
b Turn on the sound bar. :
The sound bar and wireless subwoofer will be
automatically connected. The subwoofer's green
LED turns on.
Subwoofer Connection Manually
If the subwoofer does not make sound, try to connect
manually.
a Press Pairing button on the rear of the wireless
subwoofer.
• The green LED on the rear of wireless
subwoofer blinks quickly.
b Turn on the sound bar.
c Pairing is completed.
• The green LED on the rear of wireless
subwoofer turns on.
Keep the sound bar and the subwoofer away
from the device (ex. wireless router, microwave
oven, etc.) over 1 m to prevent wireless
interference.
> 1 m
The buttons are located on the rear.
LED indicator
1 ·······································Standby
F ································Selects function
-/+ ·······························Adjusts volume
····················Connects wireless network.
···· Adds the additional Music Flow product to
your network. (In case that one or more Music Flow
product is connected.)
LED indicator: Shows connection status.
• White (Blinking): Waiting for network connection
• White (Staying on): Network connection is
completed.
• White (Dimmed): Standby mode with network
connection.
• Green(Stayingon):Therstgroupwasset.
• Red (Staying on): Standby mode without network
connection.
LAN
a
b
c
d
a Check network condition. A router connected to
network should be installed.
b Connect your smart device to your home network.
c Connect the sound bar to the power supply.
d Connect the media server to your home network in
order to enjoy music.
All devices should be connected to same router.
• Download LG Music Flow Application
Download “Music Flow Player” on the App Store or
Google Play Store.
• Launch Music Flow Player App
Follow the steps for wired or wireless connection
displayed on the screen.
Network ConnectionTV Connection
Connect the sound bar and TV using Optical ( ) or
HDMI ARC (
).
Optical Connection
a Connect the sound bar to the TV using
Optical cable.
b Set up [External Speaker (Optical)] on your
TV setting menu.
TV
HDMI(ARC) Connection
a Connect the sound bar to the TV using HDMI
cable.
b Set up [External Speaker (HDMI ARC)] on
your TV setting menu.
TV
• HDMI connection is unavailable if your TV
does not support HDMI ARC.
• If this unit is connected by OPTICAL and
ARC at the same time, the ARC signal is a
high priority.
Additional Device Connection
a Connect to the external device like as follow.
(Set-top Box,
Player etc.)
OR
b Set the input source by pressing F on the
remote control or unit repeatedly.
Remote control
Replacement of battery
SOUND EFFECT: Selects a sound effect mode.
F: Selects the function and the input source.
8: Turns down the volume at night.
: Adjusts sound level of Treble, Bass and Sub-woofer.
INFO: Displays the input source information.
AV SYNC: Synchronizes the audio and video.
SLEEP: Setsthesystemtoturnoffautomaticallyataspecied
time.
AUTO VOL:
Adjusts too loud or low output volume level
appropriately.
AUTO POWER: Automatically turns on by an input source.
Additional Information
Specication
Power
consumption
Refer to the main label.
AC adapter
y
Model : DA-38A25
y
Manufacturer : Asian Power Devices Inc.
y
Input : 100 - 240 V ~ 50 - 60 Hz
y
Output : 25 V
0
1.52 A
Dimensions
(W x H x D)
Approx. 1220 mm x 38 mm x 105 mm
Amplier
(Total RMS
Output power)
300 W RMS
Designandspecicationsaresubjecttochangewithoutnotice.
OPEN SOURCE SOFTWARE NOTICE
INFORMATION
To obtain the source code under GPL, LGPL, MPL, and other open
source licenses, that is contained in this product, please visit
http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty
disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-
ROM for a charge covering the cost of performing such distribution
(such as the cost of media, shipping and handling) upon email
request to [e-mail]. This offer is valid for three (3)
years from the date on which you purchased the product.
IMPORTANT SAFETY NOTICE
Thecordgripfortheplugttedtothisproductisbuilt
into the existing power cord as supplied. If, for any reason
you need to shorten the cord,
DO NOT RE-USE THE PLUG
A new plug must be used to ensure your continued safety
by securing the plug to the power cord in accordance with
Plug & Socket Regulations 1994.
Declaration of Conformity
Hereby, LG Electronics European Shared Service Center B.V.,
declares that this Wireless Multi-room Sound Bar is compliant
with the essential requirements and other relevant provisions of
Directive 1999/5/EC. The complete Declaration of Conformity
may be requested through the following postal address:
LG Electronics European Shared Service Center B.V.
Krijgsman 1
1186 DM Amstelveen
The Netherlands
or can be requested at our dedicated DoC website:
http://www.lg.com/global/support/cedoc/cedoc#
This device is a 2.4 GHz and 5 GHz wideband transmission system,
intended for use in all EU member states and EFTA countries, with
indoor use restriction for 5 GHz band. (5150 – 5250 MHz)
For consideration of the user, this device should be installed and
operated with a minimum distance of 20 cm between the device
and the body.