OWNER’S MANUAL SJ9 SMART Hi-Fi AUDIO Wireless Multi-room Sound Bar Please read this manual carefully before operating your set and retain it for future reference. To view the instructions of advanced features, visit http://www.lg.com and then download Owner’s Manual. Some of the content in this manual may differ from your unit. MODEL SJ9 (SJ9, SPJ9B-W) www.lg.com Copyright © 2017 LG Electronics Inc. All Rights Reserved.
Getting Started Safety Information 1 CAUTION Getting Started RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Getting Started This device is equipped with a portable battery or accumulator. Symbols ~ Refers to alternating current (AC). 0 Refers to direct current (DC). 1 Refers to class II equipment. Getting Started Safety way to remove the battery from the equipment: Remove the old battery or battery pack, follow the steps in reverse order than the assembly.
Table of Contents Table of Contents 31 37 38 38 Connecting the speakers to your Home Network (Additional) – Connecting the additional speaker to your network with a LAN cable – Connecting the additional speaker to your network via the Wi-Fi Setup Method Using the Bridge – Use as a root device (wired to the home router) – Use as a wireless extender Using Media Server for PC – Music Flow PC Software for windows 3 Operating 40 40 41 42 43 45 45 46 Enjoying the Music with Music Flow Player app – Over
Table of Contents 58 58 58 58 59 60 60 60 60 61 61 61 61 61 61 – Auto display Dimmer – Displaying input source information – Auto power down – AUTO POWER On/Off – Auto function change Sound adjustment – Adjust volume level automatically – Adjust the Treble/Bass/Subwoofer – Night mode Standby mode – Standby mode – Network standby mode – BLUETOOTH standby mode Reset the Speaker – Resetting the speaker 4 Troubleshooting 62 62 63 64 64 65 Troubleshooting – General – Network – Application and PC Software –
Getting Started Main Features 1 Introduction Getting Started Made for iPod/iPhone/iPad or Android device Enjoys music from iPod/iPhone/iPad or Android device with simple connection. ,,Note Indicates special notes and operating features. >>Caution Indicates cautions for preventing possible damages from abuse. LG Sound Sync Controls volume level of this unit by the remote control of your LG TV that is compatible with LG Sound Sync.
Getting Started Remote control 7 • • • • • • • • • • • • • • a• • • • • • • • • • • • • • 1 (Power) : Switches the unit ON or OFF. F : Selects the function and the input source. Display Wi-Fi WI-FI Optical ARC OPT/HDMI ARC LG Sound Sync (Wired) Bluetooth BT LG Sound Sync (Wireless) LG TV HDMI IN HDMI IN Portable PORTABLE SOUND EFFECT : Selects a sound effect mode. (Mute) : Mutes the sound. : Set Night mode to On to reduce the sound intensity and improve fineness and softness.
Getting Started Front panel 1 Getting Started A LED indicator Shows connection status. D The buttons are located on the rear. B Remote sensor C Display window Rear panel A 1 (Standby) F (Function): Selects the function and input source. (WI-FI, OPT/HDMI ARC, BT, LG TV, HDMI IN, PORTABLE) -/+ (Volume) (Wi-Fi): Connects initial Music Flow product to your network wirelessly. (Add): Adds the additional Music Flow product to your network. (In case that one or more Music Flow product is connected.
Getting Started Installing the sound bar You can hear the sound by connecting the unit to the other device : TV, Blu-ray disc player, DVD player, etc. Mounting the main unit on a wall You can mount the main unit on a wall. You can place the wireless subwoofer anywhere in your room. But it is better to place the subwoofer near the main unit. Turn it slightly toward the center of the room to reduce the wall reflections.
Getting Started 1. Match the TV’s BOTTOM EDGE of Wall bracket install guide with the bottom of TV and attach to the position. 5. Put the unit on the brackets to match screw holes on the bottom of the unit. 1 Getting Started 6. Fix the unit with the screws firmly. 2. When you mount it on a wall (concrete), use the wall plugs. You should drill some holes. A guide sheet (Wall bracket install guide) is supplied to drill. Use the sheet to check the point to drill.
Getting Started 11 Organizing cables You can organize the cable with cable ties. Wireless subwoofer connection 1. Hold the cables together with cable ties as shown below. LED indicator of wireless subwoofer LED Color Status Green (Blink) The connection is trying. Green The connection is completed. Red The wireless subwoofer is in standby mode or the connection is failed. Off (No display) The power cord of wireless subwoofer is disconnected.
Connecting ,,Note yy It takes a few seconds (and may take longer) for the main unit and the subwoofer to communicate with each other and make sounds. yy The closer the main unit and the subwoofer, the better sound quality. It is recommended to install the main unit and the subwoofer as close as possible and avoid the cases below. 2 Connecting -- There is an obstacle between the main unit and the subwoofer.
Connecting 13 LG Sound Sync With wired connection 1. Connect your LG TV to the unit by using an optical cable. You can control some functions of this unit by your TV’s remote control with LG Sound Sync. It is compatible with the LG TV that is supported LG Sound Sync. Make sure of the LG Sound Sync logo on your TV. Optical cable Refer to the TV’s instruction manual for the details of LG Sound Sync. Make one of the following connections, depending on the capabilities of your equipment.
Connecting With wireless connection Using an HDMI cable 1. Turn on the unit by pressing 1 on the remote control or 1 on the unit. If you connect this unit to a TV that supports HDMI CEC and ARC (Audio Return Channel), you can enjoy the TV audio through the speakers of this unit without connecting the optical cable. 2. Select LG TV function by using F on the remote control or F on the unit until the function is selected. 3. Set up LG Sound Sync (Wireless) on the TV.
Connecting 15 ARC (Audio Return Channel) function What is SIMPLINK? The ARC function enables an HDMI capable TV to send the audio stream to HDMI OUT of the unit. To use this function : -- The setting method of HDMI-CEC and ARC may differ depending on the TV. For details about ARC function, refer to your TV manual. -- You must use the HDMI cable (Type A, High Speed HDMI™ cable with Ethernet).
Connecting Additional information for HDMI HDMI cable Checklist yy When you connect an HDMI or DVI compatible device make sure of the following: Some HDMI cables have poor signal transmission, which can cause problems with sound and video transmission. - Try switching off the HDMI/DVI device and this player. Next, switch on the HDMI/DVI device and leave it for around 30 seconds, then switch on this player. 2 - The connected device’s video input is set correctly for this unit.
Connecting 17 Optional equipment connection DOLBY ATMOS® What is DOLBY ATMOS®? 2 Connecting Dolby Atmos gives you amazing experience you’ve never before by overhead sound, and all the richness, clarity, and power of Dolby sound. For using DOLBY ATMOS® yy DOLBY ATMOS® is available only in HDMI IN and ARC mode. -- To use DOLBY ATMOS® in ARC mode, your TV has to support DOLBY ATMOS®. yy It is needed to set up an audio output on external devices (Blu-ray disc player, TV etc.
Connecting HDMI connection OPTICAL IN connection You can enjoy the sound from the external device which is connected to HDMI IN jack on this unit. Connect an optical output jack of external devices to the OPTICAL IN jack. Optical cable 2 Connecting To the optical output jack of external device 1. Connect the OPTICAL IN jack on the back of the unit to optical out jack of your external device. To the Blu-ray disc player, DVD player, etc. 1.
Connecting 19 PORTABLE IN connection Optional equipment connection You can enjoy both sound and picture from the external device you connect. 2 Connecting OR Listening to music from your portable player The unit can be used to play the music from many types of portable players or external devices. 1. Connect the portable player to the PORTABLE IN connector of the unit. 2. Turn the power on by pressing 1 (Power). 3.
Connecting Initial Multi-Room Setup When installing the Music Flow product for the first time, you can choose two types of connection as below. 2 Wired connection (Music Flow Mesh Network Connection) Connecting Connect your speaker to the home router using LAN cable. Then you can connect the additional Music Flow products (Optional) to your home network wirelessly. Refer to “Connecting the speakers to your Home Network (Additional)” on page 31.
Connecting 21 ,,Note yy Make sure that your smart device is connected to the internet. 3. Select [Connect product] to install the speaker you’ve purchased. yy Make sure that your smart device has a scanning application. If you don’t have, download it from Apple “App Store” icon or Google “Play Store”. Starting with Music Flow Player app 1. Check the contents of terms of use and select [Accept].
Connecting Connecting the speaker to your Home Network Using a wired network provides the best performance, because the attached devices connect directly to the network without radio frequency interference. 2 Please refer to the documentation for your network device for further instructions. Connecting Preparation yy Make sure that wireless network environment using a router is installed at your home. ,,Note yy Simple Connection is supported by Bluetooth Ver 4.0 (or higher).
Connecting 23 3. If the network password is set, security screen is displayed. Type the password. Connecting the speaker to your network with a LAN cable Connection overview Broadband service 2 4. After typing password, tap [Next]. LAN 5. Tap [Finish] to finish making the connection. After finishing, TV connection screen is displayed. Follow the direction on the screen.
Connecting 1. Turn on the unit by using 1 on the remote control or 1 on the unit. The LED indicator starts to blink in white. 2. On your smart device, launch Music Flow Player app. Select [Connect product] to install the speaker. Plug in the desired device, and tap [Next]. 5. Connect one end of the LAN cable to the speaker’s LAN port and connect the other end to your wireless router. Wait a moment until the LED indicator stops blinking and stays white. 2 Connecting 6.
Connecting 25 (If there is an update) 8. This application is checking the Version of software of your speaker and then shows the version. Connecting the speaker to your Network via the Wi-Fi Setup Method (Android) Connection overview Broadband service Select [Next] after checking the version information. ,,Note yy You cannot use the speaker without a router. When using the wired router, you can control the speaker with Music Flow PC Software.
Connecting 1. Turn on the unit by using 1 on the remote control or 1 on the unit. The LED indicator starts to blink in white. button on the unit. Then the LED 6. Press the indicator blinks in white and red alternately. 2. On your smart device, launch Music Flow Player app. Select [Connect product] to install the speaker. Plug in the desired device, and tap [Next]. 2 Connecting 7. Then select [Next] on the screen. 3. Select Sound bar and tap [Next] on the screen. 8.
Connecting 27 9. Then select [Next] on the screen. (If there is an update) 11. This application is checking the Version of software of your speaker and then shows the version. 2 Connecting Select [Next] after checking the version information. ,,Note If the speaker fails to connect to your network or its network connection operates abnormally, place the speaker closer to your router and try again. 10. Select [Finish] to complete the connection.
Connecting Connecting the speaker to your Network via the Wi-Fi Setup Method (iOS) Connection overview 2 1. Turn on the unit by using 1 on the remote control or 1 on the unit. The LED indicator starts to blink in white. 2. On your smart device, launch Music Flow Player app. Select [Connect product] to install the speaker. Plug in the desired device, and tap [Next]. Broadband service Connecting Router 3. Select Sound bar and tap [Next] on the screen. 4. Select [Wireless connection] on the screen.
Connecting 29 6. Press the button on the unit. Then the LED indicator blinks in white and red alternately. 8. On your iOS device, go to iOS setting -> Wi-Fi setting and select “MusicFlow_Setup” to connect. 2 ,,Note yy If “MusicFlow_Setup” is not on the list, scan for available Wi-Fi networks again. yy When your smart device is connected to “MusicFlow_Setup”, you cannot use the internet. 9. If you have a password for your network, the security screen appears on your smart device. Enter your password.
Connecting 10. Then select [Next] on the screen. Notes on Network Connection yy Many network connection problems during set up can often be fixed by re-setting the router. After connecting the speaker to the home network, quickly power off and/or disconnect the power cable of the home network router or cable modem. Then power on and/or connect the power cable again.
Connecting 31 yy You need to turn the speaker’s power off and on again if you restart the router. yy You need to perform a factory set and setup the network connection for speaker, if you install new router. yy If you use other characters than the english alphabet or digits for the SSID name of your access point or wireless router, it may be displayed differently. Connecting the speakers to your Home Network (Additional) You can enjoy the music with multiple speakers and single smart device you have.
Connecting 1. Connect the speaker (Main) to your network. Refer to “Connecting the speaker to your Home network” on page 22. 4. Plug in the desired device, and tap [Next]. 2. On your smart device, select the Music Flow Player app. Tap the button. 2 Connecting 5. Select the product you want to connect and tap [Next] on the screen. 3. Select the [Add Speaker] on the side menu. 6. Select [Wired connection] on the screen.
Connecting 33 7. Connect one end of the LAN cable to the speaker’s ETHERNET port and connect the other end to your wireless router. Wait a moment until the LED indicator stops blinking and stays white. Connecting the additional speaker to your network via the Wi-Fi Setup Method Connection overview Broadband service 2 LAN cable 8. Then select [Next] on the screen. Speaker (Main) Speaker (Add) 9. Select [Finish] to complete the connection.
Connecting 1. Connect the speaker (Main) to your network. Refer to “Connecting the speaker to your Home network” on page 22. 4. Select the product you want to connect and tap [Next] on the screen. 2. On your smart device, select the Music Flow Player app. Tap the button. 2 Connecting 5. Select [Wireless connection] on the screen. 3. Select the [Add Speaker] on the side menu. 6. Press the ADD button on the rear of the speaker Network status LED blinks red. (Add).
Connecting 35 7. Then select the [Next] on the screen. Using the Bridge Bridge (R1) extends a range of use of speakers. Please purchase it separately if you want to use. Use as a root device (wired to the home router) 8. Select [Finish] to complete the connection. When your home router is located too far from any speaker location that is to be connected via wired mode, connect the Bridge (R1) to your home router with LAN cable. Bridge (R1) 1.
Connecting 3. Select the [Add Speaker] on the side menu. 6. Select [Finish] to complete the connection. 4. Select the [Bridge] and tap [Next] on the screen. 7. Connect the speaker to Bridge (R1). Refer to “Connecting the speakers to your Home Network (Additional)” on page 31. 2 Connecting 5. Following the instruction on Music Flow Player app, connect the Bridge (R1) and the router with LAN cable. Wait a moment until Network status LED stops blinking and stays white.
Connecting 37 Use as a wireless extender 3. Select the [Add Speaker] on the side menu. If there is at least one speaker with wired connection to the router When you want to expand Music Flow mesh network coverage, add the Bridge (R1) to your home network. 2 4. Select the Bridge and tap [Next] on the screen. 1. Attach the power cord to the power port on the rear of the Bridge (R1) and then plug the power cord into an electrical outlet. 2. The power LED on the front of Bridge (R1) turns on.
Connecting 6. Follow the instruction on Music Flow Player app and tap [Next] on the screen. Using Media Server for PC Media server Software allows users to access audio files stored in media server and enjoy them on this speaker via home networking. Before connecting to PC to play a file, Media server Software should be installed on your PC. 2 Connecting ,,Note Make sure that wireless network environment using a router is installed at your home. 7. Select [Finish] to complete the connection.
Connecting 39 ,,Note yy You might close firewalls and Anti-Virus programs on your PC while installing Music Flow PC Software. yy The Music Flow PC Software is a customized software edition only for sharing files and folders to this speaker. yy If you want a full explanation about Music Flow PC Software, click the question marked icon on home menu. yy CPU : Intel® 2.
Operating Enjoying the Music with Music Flow Player app Overview of Home menu Launch Music Flow Player app on your smart device. The [Home] appears. With Music Flow Player app, you can play music in your smart device. ,,Note yy For more detailed instruction about Music Flow Player app, switch on the [User Guide] in [Settings] > [General] on the side menu. yy Some of the content in this part may differ from Music Flow Player app depending on the application’s version. 3 Operating Preparation 1.
Operating 41 Edit the Online streaming Service list Overview of the side menu 1. Launch Music Flow Player app on your smart device. The [Home] appears. 1. Launch Music Flow Player app on your smart device. The [Home] appears. 2. Tap the [EDIT] menu. 2. Tap the button. 3 yy Select the checkbox of the Online service you want to see on Home. yy Drag upwards or downwards to change the order of the Online service. yy Tap the , add the online services.
Operating Playing a song 5. Select the desired song. Then selected song is displayed and played. 1. Launch Music Flow Player app on your smart device. The [Home] appears. 2. Tap the button. ,,Note 3 Operating 3. Side menu appears. Select the [My Phone] on the side menu. 4. Select the desired album. If the speaker is not selected, the selecting speaker pop-up appears. Select a desired speaker.
Operating 43 Managing a playlist Overview of Playback On an album screen, tap the [ ] of the desired song. The pull down menu appears. You can confirm and adjust various information on the playback screen. 3 Displays current playing music. b - Repeats the desired contents. Every time you click it, the state changed in the (Repeat One) (Repeat All) (Repeat Off) order. - Shuffles the music on the list. Music will be played in random order. Adjusts playback. c a Play next – Selects music to play next.
Operating Selecting Sound effect Sound Effect Description This speaker has a number of pre-set surround sound fields. You can select a desired sound mode by tapping [ ]. ASC Analyzes the property of input sound and provides the sound optimized for the content in real time. Bass Blast Reinforces the bass and powerful sound. Standard You can enjoy optimized sound. Movie You can enjoy more immersive and cinematic surround sound. Music You can enjoy more good sound for music source.
Operating 45 Different ways of listening to music There are a number of differing ways of listening to music : Group, Surround and Seamless playbacks. ,,Note Group Playback You can group multiple speakers linked to the Music Flow Player app and play the same music through all the connected speakers in the same group. 1. Select [Connected Speakers] on the side menu of Music Flow Player app.
Operating 3. Grouping option appears. Tap the checkbox to select the speaker you want to play with. Then select [OK]. Surround Sound Mode (Home Cinema Mode) Simply add a LG Music Flow sound bar to your network and synchronize it with your LG Music Flow speakers to enjoy a home cinema system experience. Preparations yy Sound Bar yy Two speakers of same model (if possible) 1. Select [Connected Speakers] on the side menu of Music Flow Player app. 3 Operating 4. The speakers is ready to group playback.
Operating 47 3. Surround environment option appears. Select the left and right speakers by tapping connected speakers. Then select [OK]. ,,Note yy It is recommended to set the surround speakers to same models. yy The weak signal because of the long distance between speakers or wireless router and signal interference may cause abnormal playback. yy Depending on your wireless environment, the grouping may be broken.
Operating Seamless playback You can easily change the playing speaker from your smart device or the speaker to the another speaker without pause. Changing playing speaker from a smart device to a speaker To use Seamless playback, you have to set up Auto Music Play to On. (Page 53) ,,Note yy It is not supported when you go out of the house with your smart device. yy WI-FI function on smart device must be turned on.
Operating 49 Setting the Speaker with Music Flow Player app With Music Flow Player app, you can set the connected speaker in your smart device. ,,Note yy For more detailed instruction about Music Flow Player app, switch on the [User Guide] in [Settings] > [General] on the side menu. yy Some of the content in this part may differ from Music Flow Player app depending on the application’s version. a General – Sets for easier use of the speaker. b Speakers – Sets connected speaker.
Operating [Speakers] Menu You can adjust speakers connected to your network. a Rename – Renames the speaker. b Speaker LED – Turns on or off speaker’s LED indicator. c IP Info. - Shows the IP address of the speaker. Compressed sound transmission – Adjusts d the compression of audio source according to network status. DRC – It reduce the volume of loud sounds e or amplifies quiet sounds. (Dolby Digital only) Turns on or off DRC function. f Night – Turns on or off Night Mode function.
Operating 51 [Alarms/Sleep Timer] Menu [Account management] Menu Turns on and off the speaker at a designated time. Manages online streaming service. Alarms [Time Zone] Menu Speaker will let you know when it is time. Deletes selected alarm. Adds new alarm. Sleep Timer Sets a time to automatically turn off the speaker. 1. Select the speaker to set timer on [Sleep Timer] in the [Alarms/Sleep Timer] menu. Automatic Time zone It offers to use network provided time.
Operating [Advanced Settings] Menu Mesh Network Channel If normal playback or group playback is not smooth using multiple speakers including wireless speaker connection, changed the mesh network channel to improve network speed. 1. Select the [Settings] -> [Advanced Settings] option. ,,Note yy The speaker is disconnected temporarily during the channel changing. yy If you changed the channel when the speaker turned off, turn on and add it again.
Operating 53 Auto Music Play Sensitivity Settings You can easily change the rendering device from your smart device or a speaker to another speaker by approaching your smart device to the desired speaker. Sets the operating distance of Auto Music Play between the speaker and your smart device to adjust sensitivity of Bluetooth(BLE). yy Your smart device should support Bluetooth (BLE). yy This function is subject to the smart device capability and the Wi-Fi network status.
Operating [Chromecast] Menu 2. Starts the software update. Learn how to cast Shows how to use Chromecast. Chromecast enabled apps Shows available apps on Chromecast. Cast Groups Select [Learn about Cast Groups] or [How to cast to a group] to show the selected information. ,,Note 3 Operating To use Cast Groups, install Google Home application. Download the application from Apple “App Store” or Google “Play Store”.
Operating 55 Using a BLUETOOTH Wireless Technology About BLUETOOTH Bluetooth is wireless communication technology for short range connection. The sound may be interrupted when the connection interfered by the other electronic wave or you connect the Bluetooth in the other rooms. yy Available Devices : Smart phone, MP3, Notebook, etc. yy Version: 4.0 yy Codec: SBC BLUETOOTH profiles In order to use Bluetooth wireless technology, devices must be able to interpret certain profiles.
Operating 4. When this unit is successfully connected with your Bluetooth device, “PAIRED” [ your device’s name [ “BT” appears on the display window. ,,Note yy If it is unavailable to display device name on the unit, “-” will be displayed. yy To check the connected device’s name, press INFO on the remote control. The connected Bluetooth device’s name is displayed. 5. Listen to music. 3 To play music in your Bluetooth device, refer to your Bluetooth device’s user guide.
Operating 57 BLUETOOTH connection lock (BT LOCK) You can limit Bluetooth connection to only BT (Bluetooth) and LG TV function to prevent unintended Bluetooth connection. To turn on this function, press and hold AUTO POWER on the remote control for about 2 seconds in BT (Bluetooth) function and press it once again while “OFF - BT LOCK” is scrolled. Then you can limit Bluetooth connection.
Operating 58 Turn off the sound temporarily Auto power down Press This unit will turn itself off to save electric consumption when the main unit is not connected to an external device and is not used for 15 minutes. (Mute) to mute your unit. You can mute your unit, for example, to answer the telephone, “MUTE” is displayed in the display window. To cancel it, press (Mute) again on the remote control or change the volume level. Sleep timer setting This unit will turn off by itself after the time set.
Operating 59 ,,Note yy After the unit is turned on by AUTO POWER function, it will be automatically turned off if there is no signal for a certain period of time from the TV connected by LG Sound Sync (Optical/Wireless). yy After the unit is turned on by AUTO POWER function, it will be automatically turned off if there is no signal for a certain period of time from the external device. yy If you turned off the unit directly, it cannot be turned on automatically by AUTO POWER function.
Operating ,,Note yy To change to optical function, it needs 5 seconds of no signal. yy This unit does not change the function to optical if SIMPLINK of the connected TV, Bluray disc player, set-top box or etc. device set to on or connected CEC supported device is turned on. yy If you want to use the auto function change, turn off SIMPLINK function on your LG TV. It takes for about 30 seconds to turn off SIMPLINK.
Operating 61 Standby mode BLUETOOTH standby mode The speaker switches to the standby mode if there is no music playback or no button operation. If the Bluetooth standby mode is set to ON, the speaker switches Bluetooth standby mode when is turned off. Standby mode When you turn on the main unit in the Bluetooth standby mode, Bluetooth and LG TV are able to connect even if network is not connected. Option 1.
Troubleshooting Troubleshooting General Symptoms Cause & Solution The unit does not work properly. yy Turn off the power of this unit and the connected external device (TV, Woofer, DVD-player, Amplifier, etc.) and turn them on again. yy Disconnect the power cord of this unit and the connected external device (TV, Woofer, DVD-player, Amplifier, etc.) and then try connecting again. yy Previous setting may not be saved when device power is shut off. The power does not turn on.
Troubleshooting 63 Symptoms Cause & Solution When you feel the output sound of the unit is low. Check the details below and adjust the unit according to them. yy Switch the state of DRC function to [OFF] by using Music Flow Player. yy With the sound bar connected with TV, change the AUDIO DIGITAL OUT setting on TV Setup Menu from [PCM] to [AUTO] or [BITSTREAM].
Troubleshooting Application and PC Software Symptoms Cause & Solution Music Flow Player app doesn’t work properly. Does an error occur when accessing the app? yy Make sure that your smart device is compatible with the app. yy Make sure that the Music Flow Player app is the latest version. yy Make sure that the speaker’s front LED turns from red to white. Music Flow PC Software doesn’t work properly. Does the firewall on your PC set to enable? yy Disable all your firewalls and try to connect again.
Troubleshooting 65 NOTES to release Demo mode Symptoms Cause & Solution Can not change input source with F button such as BT (Bluetooth), HDMI etc. and only [DEMO] indication is showing in the front display. Unplug the power cord and plug it in again. If that doesn’t work, press and hold F button (About 15 seconds) on the main unit until the display indicates current selected function. Remote Control does not work.
Appendix File requirement Available File extensions : “.mp3”, “.wma”, “.flac”, “.aac”, “.ogg”, “.wav” Sampling frequency: within 32 to 48 kHz (mp3, wma), up to 192 kHz/24 bit (flac) Bit rate: up to 320 kbps (mp3, wma) yy The file requirements are not always compatible. There may have some restrictions by file features and media server’s ability. The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by LG Electronics is under license.
Appendix 67 Specifications General Power requirements Refer to the main label on the unit. Power consumption Refer to the main label on the unit. Dimensions (W x H x D) Approx. 1200 mm x 58 mm x 145 mm (with foot) Operating temperature 5 °C to 35 °C Operating humidity 5 % to 90 % Available Digital Input Audio Sampling Frequency 32 kHz, 44.1 kHz, 48 kHz, 88.
Appendix Wireless subwoofer Power requirements Refer to the main label on the subwoofer. Power consumption Refer to the main label on the subwoofer. Type 1 Way 1 Speaker Impedance 3Ω Rated Input Power 200 W RMS Max. Input Power 400 W RMS Dimensions (W x H x D) Approx. 296 mm x 332 mm x 296 mm System LAN port Ethernet jack x 1, 10 BASE-T/100 BASE-TX Wireless LAN (Internal antenna) Integrated IEEE 802.11n (Draft 2.0) wireless networking access, compatible with 802.
Appendix 69 Handling the Speaker When shipping the speaker Please save the original shipping carton and packing materials. If you need to ship the speaker, for maximum protection, re-pack the speaker as it was originally packed at the factory. Keeping the exterior surfaces clean yy Do not use volatile liquids such as insecticide spray near the speaker. yy Wiping with strong pressure may damage the surface. yy Do not leave rubber or plastic products in contact with the speaker for a long period of time.
Appendix TERMS OF USE These Terms of Use apply to those individuals and groups who use LG’s Multiroom Speaker (LG Mutiroom Speaker), any software(s) associated with LG Multiroom Speaker, this application and any services associated this application (collectively “LG Software”). They set out LGE’s responsibilities to you as well as identifying the “dos” and “don’ts” that you should be aware of when you use the LG Software. LG Software is proprietary software owned by LG Electronics Inc.
Appendix 71 services or content provided by third party providers. We may impose limits on the use of or access to certain third party content, application or services, in any case without notice or liability. We expressly disclaims any responsibility or liability for any change, interruption, disabling, removal of or suspension of any content, application or service made available through this LG Software.
Appendix OPEN SOURCE SOFTWARE NOTICE INFORMATION To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.
