Operation Manual

Operating 27
Operating
3
Radio Operations
Be sure that FM aerials are connected.
(Page 21)
Listening to the radio
1. Press F on the remote control until FM appears
in the display window.
The last received station is tuned in.
2. Auto tuning :
Press and hold TUNING -/+ on the remote
control until the frequency indication starts to
change, then release. Scanning stops when the
unit tunes in a station.
Or
Manual tuning :
press TUNING -/+ on the remote control
repeatedly.
3. Adjust the volume by pressing
VOL (Volume)
o
/
p
on the remote control
or pressing
p
/
o
(Volume) on the unit.
Improving poor FM reception
Press and hold INFO/RDS on the remote control.
Then press INFO/RDS again to select stereo or
mono. This will change the tuner from stereo to
mono and usually improve the reception.
Presetting the Radio Stations
You can preset 10 stations for FM.
Before tuning, make sure to turn down the volume.
1. Press F until the FM appears in the display
window.
2. Select the desired frequency by pressing
TUNING -/+ on the remote control.
3. Press MEMORY on the remote control.
A preset number will blink in the display window.
4. Press MEMORY on the remote control once
again. The station is stored.
5. Repeat the steps 2 to 4 to store other stations.
6. To listen a preset station, press PRESET on the
remote control.
Deleting a saved station
1. Press PRESET on the remote control to select a
preset number you want to delete.
2. Press DELETE on the remote control,
“DEL P(number)?” will appear in the display
window.
3. Press DELETE on the remote control again to
delete the selected preset number.
Deleting all the saved stations
1. Press and hold DELETE on the remote control for
about two seconds. “DEL ALL?” will flash up on
the unit display.
2. Press DELETE on the remote control to erase all
the saved radio stations.
“DELETED ALL” will flash up on the unit display.