Owner’s Manual

3
a Connect the rear speakers to the wireless receiver via a speaker cable. When connecting the rear speakers
to the wireless receiver, connect the black striped cable to the negative terminal of each speaker and the
remaining cable to the positive terminal of each speaker.
b Connect to power in the following order: wireless receiver [ sound bar. Then, turn on the sound bar. When
the connection is automatically established with the sound bar, the LEDs on the wireless receiver will light up
in green.
If you see a red LED on the front of the wireless receiver, it means that the sound bar is not
connected to the speakers. If this is the case, connect them in the following order.
A Press the Power
button on the sound bar to turn it off.
B Press the PAIRING button on the back of the disconnected wireless receiver. Check if each LED blinks
green.
C Press the Power
button on the sound bar to turn it on.
D When the connection is established, you will see a green LED light on the front of the wireless receiver
light up in green.