Color Monitor USER GUIDE MANUEL D'UTILISATION MODEL : 57M
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Introduction........................................................................................A1 Monitor Registration ..........................................................................A2 Important Precautions .......................................................................A3 Installing the Tilt/Swivel Base ............................................................A5 Installation ..................................................................................
Introduction Thank you for purchasing an LG color monitor. This monitor supports OSD, DDC2B and Sound. It will give you high resolution performance and operation in a variety of video operating modes. It is compatible with standard PC type personal computers. The 15-inch (13.8 inches viewable) flat Square Tube design is excellent for use in a Windows or desktop publishing environment, where smaller screen sizes result in images difficult to see easily. The anti-glare treatment is easy on the eyes.
Monitor Registration The model and serial numbers These numbers You as a are found on the rear of this unit. unique to this unit and not available to others. should record requested information here and retain this guide permanent record of your purchase. Staple your receipt here. are Date of Purchase : Dealer Purchased From : Dealer Address : Dealer Phone No. : Model No. : Serial No. : Notice All rights reserved.
Important This unit has Precautions been engineered and manufactured to assure your improper use can result in potential electrical shock or fire hazard. In order not to defeat the safeguards incorporated in this monitor, observe the following basic rules for its installation, use, and servicing. Also follow all warnings and instructions marked directly on your monitor. personal safety, On but safety 1. Use only the power cord supplied with the unit.
Keep children from monitor's cabinet dropping or pushing objects into the openings. Some internal parts carry hazardous voltages. Do not add accessories that have not been designed for this monitor. During a lightning unattended for an storm or when the monitor is to be left extended period of time, it from the wall unplug outlet. Do not the bring magnetic picture tube. devices such as magnets or motors near On installation 1. Do not allow do not place 2.
Installing the Tilt/Swivel Base Turn off the Carefully equipment and all attached options. set the monitor face-down with the underside facing you. Installation 1.Align base the hooks on the tilt/swivel stand with the matching slot on the The open hooks of the stand should face the front of the monitor. The matching slots are on the first of the (underside row of slots monitor). showing 2 pairs of slots. 2.Insert the hooks into the front and rear slots.
Installation supply voltage is marked on the ID label located on the rear panel of the monitor. If your local voltage is different, do not use the monitor and contact your supplier before using the display. The Connections To connect your monitor after the video 1. Turn OFF the power to your get 3. Connect the board 4. on panel signal your PC is properly installed: computer and all its attached options. 2.
Location and Function of Controls Front View Power ON/OFF Button Headphone Jack Built-in Microphone Microphone Jack Control Panel Function Power (DPMS) Indicator Contrast Brightness Rear View ID Label AC Power Socket D-Sub Audio IN MIC OUT A7 Signal Cable
Control Panel Function OSD Select /Adjustment Power Indicator Control Sound Mute Power ON/OFF MIC Button Brightness Contrast Sound Menu Increase OSD ON/OFF Enter Button Decrease Buttons the front of the monitor allow you to adjust the image easily through an OSD menu. As you choose controls, the selected icon shows you what the chosen control will do. These pictures give you immediate understanding of the controls. The following is a description of use for each button.
OSD Select/Adjustment Control Use these buttons for selecting (highlighting) an OSD icon to be adjusted. It is also used for selecting the level of the selected item to be adjusted. Sound Menu: To adjust Sound Mute Used to select mute sound on). on sound (means menu. sound off) and mute off (means AUDIO 1024X768/85Hz MIC : Built-in On Screen microphone (Electret Condenser Microphone).
On Screen You item were using introduced to the the OSD system. Listed below items that are are OSD procedure Adjustment of selection and the icons, icon names, and icon on the Menu. adjusting descriptions Adjust of the Description To POSITION 1024X768/85Hz move picture image Moves the screen Moves the screen left and right. image left. image right. ADJ: MENU: Horizontal Size H To adjust image width.
OSD Adjust Description Trapezoid To correct geometric Makes the TRAPEZOID the 1024X768/85Hz distortion. screen image narrower at top. Moves the screen image wider at the top. ADJ: MENU: Rotate Screen ROTATE To correct SCREEN 1024X768/85Hz image rotation. Tilts the screen Tilts the screen image left. image right. ADJ: MENU: Zoom To adjust Horizontal simultaneously.
OSD Adjust Description Color To select color 7200K/ temperature, 9300K/ user. COLOR 9300K USER 7200K MENU: SEL: OSD Decreases the amount of color in the image. Increases the amount of color in the image. COLOR R 47% G 50% B 50% OSD SEL: OSD ADJ: OSD Position OSD OSD To correct OSD POSITION position image's Horizontal position. and Vertical 1024X768/85Hz H POSITION: V POSITION: OSD ADJ: SEL: OSD Time To select OSD display (5~120seconds) time.
OSD Adjust Description Information To inform users of preset and user mode data. INFORMATION 1024X768/85Hz MENU USER MODE: 5 PRESET MODE: 6 SEL: : MENU : 31.4kHz / 70Hz 2 37.5kHz / 75Hz 3 46.8kHz / 75Hz 4 53.6kHz / 85Hz 5 63.9kHz / 6 68.6kHz / 85Hz END USER 1 60Hz PRESETTHE MENU : 1 68.7kHz / 85Hz 67.5kHz / 75Hz 3 60.0kHz / 60Hz 4 46.5kHz / 87Hz 5 64.
Sound Selection and You item were using introduced to the the OSD system. Listed below items that Adjustment ( are are OSD of procedure ) selection and the icons, icon names, and icon on the main Menu. adjusting descriptions an of the shown Adjust Description Volume Raises or lowers audio level. Raises or lowers treble level. Raises or lowers Bass level.
Power Management System This monitor incorporates new circuitry for lowering energy usage during idle time, following the Display Power Management Signalling (DPMS) guide lines of the Video Electronics Standards Association (VESA), and is certified as exceeding the EPA's Energy Star program for reduced power usage. For the power savings feature to operate, the monitor must be used with either a PC having power saving circuitry.
Video Modes Memory This multi-synchronous auto-scanning monitor can automatically detect and display several video modes falling within the monitor's scanning range of 30-70kHz Horizontal and 50-120Hz Vertical. In the PC area, this relates to a maximum flicker free usable resolution of 1280 x 1024 at a non-interlaced refresh rate of 60Hz Vertical. For convenience, the monitor has a 37 mode memory, of which 6 modes come from the factory preset to popular video modes as described below.
A note about the video memory modes: There is a total of 37 video memory modes, generally more modes than you will use at any one time. Of these 37 modes, 6 are permanent, factory fixed modes that cannot be changed, and another 6 are set at the but may be overwritten to make more room. The remaining 25 left blank (empty). If you use up the 25 blank modes and still have more new video modes, the monitor will store information in the other 6 soft preset modes for the new mode storage.
Microphone Operation On the left side there is MIC (Microphone) jack. By plugging a long length of cable needed to use this MIC jack, you need to use the cable (supplied) to plug into the rear of the monitor (MIC OUT) and into the MIC input jack of your sound card (if available). If you lost the supplied cable, consult with your dealer or buy a stereo a in here, it may reduce the reach the PC's sound card. In order to microphone cable.
Low Radiation Compliance (MPR II) This monitor meets of the strictest one guidelines available today for low radiation emissions, offering the user extra shielding and an antistatic screen coating. These guidelines, set forth by a government agency in Sweden, limit the amount of emission allowed in the Extremely Low Frequency (ELF) and Very Low Frequency (VLF) electromagnetic range.
Troubleshooting Symptom: Possible The causes: signal Symptom: Possible The SELF DIAGNOSTICS message. cable is not connected. OUT OF FREQUENCY message appears. causes: frequency of the sync input is outside the operating range of the monitor. HF:120.8kHz VF:110.
Service 1. the monitor from the wall outlet and refer servicing to personnel when : The power cord or plug is damaged or frayed. Liquid has been spilled into the monitor. The monitor has been exposed to rain or water. The monitor does not operate normally following the operating instructions. Adjust only those controls that are covered in the operating instructions.
Specifications Sync Signal type Type Separate Signal sync Connector Pin H. sync V. sync H. sync V. sync Assignment Pin 1 5 6 11 Separate Sync 10 15 1 Red 2 Green 3 Blue 4 Ground 5 Self-Test 6 Red Ground 7 Green Ground 8 Blue Ground 9NC 10 Ground 11 Ground 12 SDA 13 14 Horiz.Sync Vert.
Specifications Picture tube 15 inch inches (13.8 Darkface, 0.28 mm viewable) FST, Non-glare, pitch 90 degree deflection, dot Sync Input Horizontal Freq. : 30kHz 70kHz (Automatic) : 50Hz Vertical Freq. 120Hz (Automatic) : Separate, TTL, positive/negative Input Form : 15 pin D-Sub connector Signal input - - Video Input Display Area : 10.2 x7.5inch / 260 x 190mm (H x V) Input Form : Separate, RGB Analog, 0.
Monitor Limited Warranty for the United States and Canada LG Electronics U.S.A., Inc. will repair or at its option replace, without charge, your product which proves workmanship under normal use, during the warranty period listed below from the date of original purchase. This warranty is good only to the original purchaser of the product during the warranty period as long as it is in the U.S. including Alaska, Hawaii, U.S. Territories and to be defective in material or all Canadian Provinces.
