Owner's Manual

A16
Video
Memory
Modes
This
multi-synchronous auto-scanning
monitor can
automatically
detect and
display
several video modes
falling
within the monitor's
scanning range
of 30-70kHz Horizontal and 50-120Hz Vertical.
In
the
PC
area,
this relates to a maximum flicker free usable resolution of
1280
x
1024 at a non-interlaced refresh rate of 60Hz Vertical.
For
convenience,
the monitor has a 37 mode
memory,
of which 6
modes come from the
factory preset
to
popular
video modes as
described below.
Modes 13-37 are
empty
and can
accept
new video data.
If
the monitor detects one of the above
signals
from
your computer's
video
card,
it
will
recall that mode and
any
stored
image adjustments
you may
have made before.
If
the monitor detects a new video mode
that had not been
present
before or is not one of the above listed
factory presets,
it
will
store a new mode
automatically
in
one of the
blank
(empty) memory
modes
(in
this
example,
mode
13).
When
you
now
adjust
the OSD controls to
your preference,
these
image settings
will
also be stored
in
mode 13. Whenever
your
video card or PC
switches to the mode that the monitor
recognizes
as mode
13,
your
personal image settings
will
also be recalled.
Horizontal
Frequency
31.47 kHz
37.50 kHz
46.88 kHz
53.67 kHz
63.98 kHz
68.68 kHz
Vertical
Frequency
70 Hz
75 Hz
75 Hz
85 Hz
60 Hz
85 Hz
Horiz
sync
-
-
+
+
+
+
Verti
sync
+
-
+
+
+
+
Mode
1
2
3
4
5
6
Comments
Factory
fixed,
but
may
be
updated
by
user's
setting.
Polarity
Display
Mode
VGA2 720 x 400
VGA VESA75 640 x 480
SVGA VESA75 800 x 600
SVGA VESA85 800 x 600
VESA 1280 x 1024
VESA85 1024 x 768