Owner's Manual

Take time to read this OWNER S MANUAL
thoroughly. Familiarity
with
installation and
operating procedures
will
help you
obtain the
best
performance
from
your
CAR Receiver.
Detachable Front
Panel Car Receiver
OWNER'S MANUAL
MODEL:TCC-9210
P/N:
3828R-F016C
Location of Controls
Setting
the Clock Time
POWER/MUTE
( )Button
MODE/LOUD(MD/LD)
Button
TUNE/AMS
UP/DOWN(+/-)
Button
(FF/REW,
CLOCK
Adjust)
LCD
Display
RELEASE( )
Button
CLCOK Button
EQUALIZER(EQ)
Button
PRESET Button
AS/PS,
AMS ON/OFF Button
BAND,
DIRECTION( )
Button
FUNCTION(FUNC)
Button
CONTROL UP/DOWN
( )Button
EJECT( )
Button
CASSETTE slot
Press CLOCK button once
momentarily
to
display
the time.
Press the CLOCK button for
more than
2
seconds,
and
clock indication
will
be
displayed
for 5 seconds.
Adjust
the clock
within
5
seconds.
Pressing
TUNE/AMS
+
button
adjusts
the hour.
Pressing
TUNE/AMS
-
button
adjusts
the minute.
Press the CLOCK
button,
the
display
returns to the
previous display
after 5
seconds.
MUTE
VOL
FUNC BAND
CLOCK
EQ
123456
AMS
AS/PS
MD/LD
13 4
8 9 12 10 11
5
6
7
2
13
14
MINUTE
HOUR
MUTE
VOL
FUNC BAND
A
AS/PS
CLOCK
Power ON and OFF
Press
POWER/MUTE( )
button or
any
other button to
turn the unit on.
Press
POWER/MUTE( )
button for more than
2
seconds to turn
it
off.
Note:
Whenever
you
turn on the
unit,
it
will
operate
at the volume level
memorized.
Loudness Function
Press the
MODE/LOUD(MD/LD)
button for more than
2
seconds,
activates the loudness circuit
which boosts to
compensate
the
human ear's lack of
sensitivity
to
bass at low levels.
Mute Function
POWER/MUTE( )
button
is
operated
as muted state
on/off.
The
releasing
mode mute
state is when
any
button is
pressed again.
MODE/LOUD(MD/LD)
Button
Press the
MODE/LOUD(MD/LD)
button to
change
the control of
volume, bass, treble,
balance and
fader.
Note:
The unit cannot
adjust
the bass
and treble
in
the
EQ
on mode.
CONTROL UP/DOWN
Button( )
After
you
have selected the
proper
mode
by using
the
MODE/LOUD(MD/LD)
button,
control the desired function
by
pressing
this buttons
within
5
seconds. After
you
finish
selecting
modes,
the unit
returns to the initial mode.
Operating display
in
all modes:
A
numeric
display
is converted
by pressing
this buttons.
FUNCTION(FUNC)
Button
This button serves to switch over
between the audio sources at
cassette
operation(cassette
radio)
EQUALIZER(EQ)
Button
Each
press
of the
EQ
button
switches the unit to the other
equalizer
mode,
as follows.
POP CLASSIC ROCK
Release POP
?POP
:
Optimized
for
R&B,
Soul
and
Country
music.
?CLASSIC
:
Optimized
for
orchestral music.
?ROCK
:
Optimized
for Hard Rock
and
Heavy
Metal music.
Sound
Adjustment
Tape Playback
Basic
Operation
Open
the front
panel.
If
more than 30 seconds have
elapsed
after
opening
the front
panel,
unit was turned off
automatically.
nsert a cassette.
The cassette is
automatically
loaded and
play begins.
The
tape
direction can be
reversed
by pressing
DIRECTION
( )
button.
The
tape
direction
automatically
reverses when the
tape
end
has been reached.
To
stop playback, press
the
EJECT()
button and remove
the cassette
tape.
Fast
forwarding
and
rewinding
the
tape
*
Fast
forwarding tapes
:
Press
the TUNE/AMS
+
button.
*
Rewinding tapes
:
Press the TUNE/AMS
-
button.
Switching
between
audio sources
Using
the button FUNCTION
(FUNC).
This button serves to
switch over between cassette and
radio
operation
even
if
the
cassette remains inserted.
If
you
switch over to radio
operation
the
cassette
tape
is
stopped.
Auto Music Search
(AMS)
Your car receiver has the
ability (by searching
track
gaps)
to
quickly
find the
beginning
of next or before
tracks on a cassette.
While the
playing, press
the
AMS
UP/DOWN(+/-)
button.
The cassette deck
will
search for and
play
the
next(before)
track.
During searching
"AMS"
will
show
in
the
display.
Music search
may
not
function
properly
for the
following types
of
recordings.
This is due to the
recording
and is not a malfunction of
the unit.
-
There are noises
in
the
spaces
between tracks.
-
A
blank
space
is less than
4
seconds
long.
-
A
track includes a
long
pause
or continues at low
volume for several seconds.
Ejecting
a Cassette
Open
the front
panel.
Press the
EJECT()
button.
MUTE
FUNC BAND AS
MUTE
VOL
C BAND AS
TRACK 1 TRACK 2
Tape
Direction
10sec
TRACK 1 TRACK 2
Tape
Direction
CLOCK
EQ
56
RELEASE Button
Front Panel
CLOCK
EQ
56
exposed
side
The cassette
ejects.
Radio
Operation
Basic
Operation
Turn the
power
ON.
For Radio source selection
press
the FUNCTION
(FUNC)
button
shortly
Press the
BAND
button to
select the desired
frequency
band.
Select the desired stations.
AUTO
Tuning
Press the TUNE
UP/DOWN(+/-)
buttons
for more than 1seconds.
MANUAL
Tuning
Press the TUNE
UP/DOWN(+/-)
buttons
repeatedly
until the
desired station
appears.
Adjust
the Volume and Tone
using
MODE/LOUD
(MD/LD)
and CONTROL
UP/DOWN( )
button.
Memorizing
Stations
24
stations
[18FM,
6AM(MW)]
can be
preset using
PRESET
(1-6)
buttons. Stations often
listened to can be
quickly
recalled.
Select the desired band
using
the
BAND
button.
Tune
in
the desired station
using
the TUNE
UP/DOWN(+/-)
buttons.
Press one of the
PRESET(1-6)
button for more than
2
seconds. The station has now
been stored at one of the
preset
buttons.
Repeat steps
and for
each of the
remaining
5
PRESET buttons.
Auto Store
(AS)
6 stations
in
the selected band
can be stored
automatically.
Turn the
power
ON.
Select the desired band of
stations to be received.
Press the AS/PS button for
more than
2
seconds,
and
then this function
implements.
The selected band is
automatically
scanned and
the 6
strongest
stations are
stored. Then the
preset
stations are
displayed
repeatedly.
Press the AS/PS button to
stop scanning
the
preset
stations.
Preset
Scanning
(PS)
Store a station for each one
of PRESET
(1-6)
buttons.
When the AS/PS button is
pressed,
the
preset
stations
are monitored
in
sequence
for 5 seconds
each,
The
station number is shown
in
the
preset
station indicator.
When the desired station is
received,
press
the AS/PS
button
again
to
stop scanning.