TCD-100R.JA3RMLR_ENG_7P Car DVD Receiver OWNER'S MANUAL MODEL : TCD-100R TCD-101R Before please read this The working life chase. adjusting this product, instruction booklet carefully and completely.
Table of Contents Introduction Operation TableofContents.................................2-4 BasicOperation................................19-21 SafetyPrecautions.................................5 Turningtheuniton...................................19 BeforeUse.....................................6-10 Turningtheunitoff...................................19 SymbolusedinthisManual..............................6 Selectingasource....................................19 AbouttheSymbolDisplay...............
Table of Contents SpecialFeatures.....................................40 Operation OperationwithDISPLAYMENU......................30 GeneralExplanation..................................30 On-ScreenDisplay...................................30 ?On-screendisplayoperation.........................30 ?PlaybackStatus/Restrictions........................30 OperationwithSETUPMENU.....................31-35 InitialSettings.....................................31-35 ?GeneralOperation................................
Table of Contents of your old Operation Disposal OperationwithCDchanger..........................44 1. When this crossed-out wheeled bin ?PlaybackSetup...................................44 product it means the appliance product is symbol is attached to covered by the European a Directive 2002/96/EC. ?Pause..........................................44 2. All electrical and electronic ?Search.........................................44 ?MovingtoanotherTrack............................
Safety NOTES CAUTION ? Keep this manual handy as a procedures and precautions. ? Always keep RISK OF ELECTRIC SHOCK DO NOT OPEN Warning: cover or To reduce the risk of electric Warning: shock, do back of this parts inside. Refer product. There are servicing to qualified To reduce the risk of fire no not the remove the service personnel.
Before Use To ensure manual proper carefully use of this product, please read this owner's Notes Handling lightning flash symbol alerts you to the presence of dangerous voltage within the product enclosure that may a other material likely damage. to cause harm to the unit itself so paper or that tape on disc by the Never stick the disc. or Storing Discs After playing, store the disc in its direct sunlight or sources of heat car exposed to direct sunlight.
Before Use Types of Playable code Regional Discs This unit is and manufactured for designed DVD encoded DVD software. This unit (8cm/12cmdisc) "5" Video CD (VCD) (8cm/12cmdisc) or Notes ? Regional on Most DVD discs have visible the a globe (8cm/12cmdisc) DVD Receiver's regional If you a try player, (8cm/12cmdisc) region "5" discs labeled Codes clearly Audio CD with CD TEXT function of "ALL".
Before Use Features DVD video It is playback possible to play back DVD video, DVD±R and DVD±RW. Video CDs featuring PBC compatibility It is possible to play back Video CDs featuring control). PBC (Playback Dolby Digital/DTS compatibility When using this unit with a multi channel processor, you the atmosphere and excitement provided by DVD movie music software featuring 5.1 channel recordings.
Before Use Use and Installing Pull the pencil minus of the remote control care the Using Point the remote control in the direction of the front battery tray outward on the back of the remote control with point pen and insert the battery with (-) poles pointing in the proper direction. or the remote control ball the a plus (+) panel to operate.
Before Use Protecting your unit from theft Attaching The front the panel can be detached from the head unit protective case provided to discourage theft. 1. Press RELEASE RELEASE 2. Grip ( to open the front and stored in panel panel. and pull it gently outward. Take care not to 3. Put the front grip panel it tightly or into the to drop it. protective case provided keeping.
Front Panel 1 2 3 4 5 6 7 8 9 INTRODUC 10 1 2 3 4 5 11 12 14 13 10 RELEASE 11 TILT button POWER/SOURCE button 12 CLOCK/INFORMATION BAND 13 ? MUTE button ? EQ/XDSS button (BND) button VOLUME KNOB/ Sound mode selection ? PAUSE button/ TV ? INTRO (Auto /// 7 8 9 Store/Preset Scan), (left/right/up/down) PTY button, ? buttons ? ? FUNCTION (FUN) button (1-6) (CLK/INFO) System (Auto, NTSC, or PAL) Selection (INT) button REPEAT (RPT) button RANDOM (RDM) button
Display Window 1 2 3 4 5 6 OU NRDM 7 D ONRG DISC 8 9 10 11 12 13 14 15 16 1 INTRO PLAY indicator 11 REG 2 RANDOM PLAY indicator 12 PTY 3 REPEAT PLAY indicator 13 AF(Alternative Frequencies) 4 EQUALIZER indicator 14 TP (Traffic Program) 5 LOUDNESS indicator 15 TA (Traffic Announcement) 6 STEREO indicator 16 XDSS 7 CDC 8 DISC OPERATING STATUS indicator 9 DISC IN indicator 10 (CD Changer) EON indicator 12 CONNECTION indicator (REGION) indicator (Progr
Remote Control 1 1 ? 6 Accesses and OFF. DVD disc. SOURCE Selects a source. BAND ? 3 4 Selects three FM and 7 MW (AM) bands. 5 4 2 ? - 10 search - 11 5 Backward Reverse/ Forward slow playback. ?SKIP(./>) Go to next chapter or track. Returns to beginning of current chapter or track or go to previous chapter or track. PAUSE (X) Pauses playback temporarily. Press repeatedly for frame-by-frame playback. PLAY (B) Starts playback. STOP (x) Stops playback. (DVD) ? SET UP display.
Installation Basic Installation Before and 1. make installing, remove sure that the the terminal of the Remove the existing car ignition-switch is set to OFF battery to avoid short-circuiting. 3. Install the installation sleeve. 4. Install the unit in to the installation sleeve. already dashboard, it When installation sleeve for the receiver unit in the an must be removed. removing Remove the the unit from the installation sleeve A rear 2. Remove the front 3.
Installation ISO-DIN Installation 1. Slide the unit into ISO-DIN frame. 2. Install 3. Slide the unit and frame into dash 4. Install dash 5. Install trim ring The notch on positioned at the bottom. 6. Install screws removed from old unit. panel or opening. PREATION adapter plate. to the unit. trim ring must be faceplate by fitting right edge pushing left edge closed.
Connections Connecting Before to Car connecting, make sure that ignition switch is set to OFF, and remove the terminal of the battery to avoid short circuits. A C 1 GND B (BLACK) 2 H.BRK (WHITE) 3 DIMMER PARKING BRAKE (ORANGE) 4 TO IGNITION DIMMER SWITCH (RED) CD CHANGER (Optional) IGNITION SWITCH 5 TO BATTERY.
Connections to Car Connecting Connecting wiring 1 BLACK 2 WHITE This lead is for connection to the : 3 ORANGE 4 RED of vehicle Colors of leads This lead is for connection to the Ground. : : parking brake. This lead is for connection to the Dimmer line which the power is supplied when the switch is set to ACC. 5 YELLOW : This lead is for connection to the (back-up) terminal always supplied.
Connections Connecting - - - to Auxiliary Equipment Connect the AUDIO INPUT connector of this unit to the AUDIO OUTPUT connector of Connect the AUDIO OUTPUT connector of this unit to Auxiliary Equipment. the AUDIO INPUT connector of Auxiliary Equipment. the VIDEO INPUT connector of Auxiliary Equipment.
Basic Turning the unit Press POWER/SOURCE POWER Adjusting on any other button on the front the remote control to turn the unit on. on panel or or Operation the volume Use VOLUME to the sound level. adjust Rotate VOLUME KNOB on the front panel to increase or decrease the volume. Turning ? the unit off Press VOLUME Press POWER/SOURCE Press POWER on the front panel for more Selecting on Adjusting the remote control to turn the unit off.
Basic About FUNCTION 1. Select a Operation (FUN) mode you want Colour mode button pressing FUN repeatedly on Colour mode the front panel during operating. - Beep mode mode → → Woofer mode Display mode → → Beep Colour mode → Contrast mode... Color WH White Color BL Blue Color GR Green Color SB 2.
Basic SOUND SOUND MODE Adjustment 1. Select the sound mode you want to adjust KNOB repeatedly on the front panel. MUTE 1. Press MUTE to cut the sound. - - "Mute" indicator will be shown in the 2. To cancel it press MUTE the EQ Using The display window. again. (equalizer) five stored equalizer curves which you can car interior easily recall ? ? ? ? ? list of the equalizer : Reproduces the acoustics of pop music. Pop Classic : Reproduces the acoustics of orchestral music.
Radio Listening the radio stations 1. Press POWER to turn the unit - Operation (POWER/SOURCE Storing on the front panel) button on. When you select 2. Press SOURCE a source the unit is turned (POWER/SOURCE on panel) Press SOURCE button until you 3. Press BAND - (BND on the front see panel) "Tuner" displayed.
Radio Auto Search To Memory (POWER/SOURCE the front on The on the front starts from the preset stations preset station is tuned in for about 7 seconds in order. To stop the scanning, press AS/PS button again or any of the PRESET panel) (1-6) To tune in the panel briefly. Each button to select the tuner. 2. Press AS/PS button the Press AS/PS button This function lets you automatically store the six strongest broadcast frequencies under PRESET (1-6) buttons. 1.
Radio RDS (Radio Data Operation System) Function - RDS (Radio Data System) is a method for sending information signals together with the transmitter signals. Your tuner is capable of translating these signals and putting the information on the display. These codes contain the following information.
Radio RDS Data (Radio System) Function - STATION NAME DISPLAY The station name is displayed automatically when RDS station is a received. - AF (Alternative Frequency)/ REG (Regional) Function ? The list of alternative frequencies give information on the various transmitters broadcasting the same program in the same or adjacent reception areas, and enable receivers equipped with a memory to store the list, to reduce the time for switching to - ? ? When the REG function is 2.
Radio RDS Data (Radio If AF functions When the are System) the whole FM the tuner automatically changes network, broadcasting a better reception the PI and AF codes. This can continue to listen to the to interruptions. (Refer wherever you programme without mean: same broadcasting frequency C. ? The AF function may not station can be received.
Radio RDS PTY (Radio Data FUNCTION (Program Type) To select following Music Preset 1 button certain program procedure can be type a 1. Press PTY repeatedly Group → 2. Press PRESET out of the reception band, operated. on the front Speech Group (1-6) Speech Group Function System) buttons → on panel the FM mode. on Frequency the front → Music panel Preset 2 button Group... in the PTY Preset 3 button mode.
Radio RDS (Radio RDS User Data System) Mode Option 2. selecting After, pressing ing -TASeek mode Function When Adjustment 1. Press the RDS/TA button for activated Operation more than 2 one seconds, it is by one activated as When TP information select- each mode. 3. Press the (right) on time which is set (90 sec), same (left)/ (right) on the front panel or b (left) / B the remote control to select the indicator.
Radio RDS (Radio -P I Sound While AF or Data System) Function - selected. When PI information is not implemented in C201 station, AF can switch to 100MHz, which is non genuine AF (where, Different with same AF) in short "DIP". If a car is cruises that critical phenomenon be can area back and forth, an radio start to retune to next PI When oscillation occurred, because the different PI code be received from 100MHz with "XXX" PI.
with DISPLAY MENU Operation General You Example: Explanation On-Screen Display during playing DVD Video display the general playback status on the TV screen. Some can be changed using the menu. To use the on-screen display. can items 1/3 Display playback Some items Selection Method Title Number On-Screen General Items status be can Numbers be can changed on displayed the on the TV Chapter screen. Number 1/12 menu. Time search On-screen display operation 1.
Operation Initial with SET UP MENU LANGUAGE Settings the By using Setup menu, you can make various adjustments to items such as picture and sound. You can also set a language for the subtitles and the on To each Setup display Setup menu item, menu, among other see pages 31 to 35. things. Menu For details English Language Disc Audio Original Disc Subtitle Off Disc Menu Original OPERATION and exit the Menu: Press SET UP to the display menu.
Operation with SET UP MENU DISPLAY AUDIO DISPLAY TV Each DVD disc has Display er's AUDIO 16:9 Type Mode variety of audio output options. Set the playoptions according to the type of audio system you use. a Widescreen AUDIO Move TV 4:3: Select when Display Display Bitstream MPEG PCM DRC On Select a Mode Mode Dolby Digital standard 4:3 TV is connected. equipment DVD setting works only when the TV Letterbox: a lower screen.
with SET UP MENU Operation LOCK (Parental Control) 1. Select B LOCK Rating Unlock Password New Country Code "Rating" (right). 2. To on the LOCK menu then press the (right) or Rating, Password and Country Code features, you must input the 4-digit security code you created. If you have not yet entered a security code you are prompted to do RU access the so. code and press ENTER or ENT. Enter it again and press ENTER or ENT to verify.
Operation Password You (Security Code) enter can Country change password. or 1. Select Password or B with SET UP MENU on the LOCK Enter the code of the menu then press the (right) (right). 2. Follow step "New" is again to rate the DVD video 2 shown as on page 33 (Rating). "Change" or new 4-digit code, then press ENTER or ENT. Input step verify.
with SET UP MENU Operation OTHERS The Auto PBC, Auto Play and B.L.E. settings can be changed. OTHERS PBC On Auto Off Play B.L.E Off You Play can DVD set up the Car DVD receiver so a DVD disc automatically playing whenever the DVD is inserted. If Auto Play mode is set to On, this Car DVD receiver will search for title that has the longest playback time and then play back the title automatically. starts On: Auto Play function is active. Off: Auto Play function is not active.
Operation Playing a DVD and Video CD 1. Press Z OPEN/CLOSE button 2. Insert a with DVD and Video CD on VCD the front Use the number buttons to select the track you want to view. Press RETURN to return to the menu screen. Menu settings and panel. disc in the unit. may differ. Follow the instructions on the You also may set PBC to On under setup. See operating procedures "Reading" appears on the display window, and playback starts automatically. If playback does not start, press PLAY (2).
Operation Still Picture and General Features Pre-Stop DVD 1. Press STOP "Pre-Stop" with DVD and Video CD DVD VCD appears in the display VCD 1. Press PAUSE (x) during playback. The unit will window. 2. To return to playback, if you press PLAY it will be played from this point you stop. (2) on Pre-Stop mode, 2. You can PAUSE (X) during playback. now DVD (x) on the Pre-Stop Slow Motion mode. 2To return to Pause playback, if you press first point of the disc.
with DVD and Video CD Operation Moving When as a to another TITLE disc has more than one DVD Moving VCD title, you can move to another title follows: When more title than disc has on a one track, you more than can move DVD VCD chapter or a disc has another chapter/track as one to follows: 1. Press DISPLAY. 2. Press the a to another CHAPTER/TRACK appropriate numbered button (0-9) to select a title Press SKIP ./> chapter/track number.
Operation Repeat DVD 1. To Repeat Chapter/Title/Off Repeat "Chapter" icon appears the TV on The Repeat Repeat - the TV on press RPT "Off" icon appears Repeat 2To exit The REPEAT for Repeat on or REPEAT the TV again. 2. Within 10 screen. 4(down) display. "Track" icon appears the TV on press RPT "OFF" icon appears or REPEAT. On a the repeat function. (See "PBC" Random again. screen. on on the setup to menu use 35.
Operation with DVD and Video CD Features Special Changing Press AUDIO the contents of DVD Video Checking language discs: Menus DVDs may offer menus that allow you to access special features. To use the disc menu, press DVD MENU. Then, press the appropriate number button to select an option. Or, use the b (up)/ or a the the Subtitles DVD 1. Press TRACK SKIP MENU on The disc button (-5) on the front panel or DVD menu is displayed.
Operation Playing CD an Audio CD and MP3/WMA Disc MP3 can CD-R CD-RW discs. play Before playing MP3/WMA recordings, MP3/WMA Recordings on page 43. Press Z OPEN/CLOSE on recordings on read the notes CD-ROM, or the front display window, MP3/WMA AUDIOCD menu 2. To return to panel and and then Insert playback starts as (X) MP3 WMA a (left), b (left) previous track. SKIP . twice or briefly to to step below. 1:40 Track1/11 Moving Track1/6 ROOT MUSIC1.
with Audio CD and MP3/WMA Disc Operation Repeat CD Intro MP3 Audio CD : MP3/WMA 2. To cancel Audio CD : MP3/WMA 1. Press INT WMA 1. Press RPT or REPEAT The "RPT FILE" appears on on the screen. the TV screen. The "INT" press RPT or REPEAT again. The "RPT TRACK" disappears on the screen. The "RPT FILE" disappears the on INTRO 2. To return to normal Repeat mode, : or during playback. The "INT" appears on the screen.
Operation Notes on MP3/WMA with Audio CD and MP3/WMA Disc 5. A Recordings audio layer-3 file-coding The unit than compressed by using the MPEG1 scheme. We call files that have the can not read an MP3 file that has a 6. Folder or (Window An WMA file is technology. WMA(Windows a Media file extension other Microsoft audio File Title, Artist Audio) CD TEXT: compression should have or Album cannot playback files, format maximum 27 letters a names should have a or less.
Operation Playback Setup Connect the CD this CD with CD Moving CDC Changer connector of this unit to connector of page 16. Audio system: Turn on the audio system and select the source connected to the Car DVD Receiver. Changer changer Press to another Disc (up)/ input Intro scan CDC 1. Press INT 2. Select the CD changer repeatedly. SOURCE 3. Insert a function disc you want to Playback Pause POWER to turn the unit or starts pressing play into automatically.
Troubleshooting Cause Symptom Power doesn't turn on. The unit doesn't Leads and connector are Correction incorrectly connected. The fuse is blown. Confirm Rectify the reason the fuse. Be very the same rate. operate. Noise and other factors microprocessor The unit does not operate correctly when the causing the operate incorrectly. to are built-in power is low. even appropriate Battery Some operations are with certain for the fuse sure battery.
Troubleshooting Cause Symptom The icon The is displayed, and operation is not possible. The and the unit cannot es) be picture stops (paus- operation The operation organization. Reading of playback. is is Correction prohibited for the disc. not compatible with the data has become This disc's impossible during is not This operation operation After pressing x once, start is not possible. possible. playback once more. operated. There's no sound.
Language Enter the appropriate (See page 31).
Country Enter the appropriate Code Code List code number for the initial Country setting "Country Code Country Code" (See page Code 34).
Code Country Code Country Country Code List Country Code Code Country LK Sri Lanka NF Norfolk Island SD Sudan TW Taiwan LR Liberia NG SE Sweden TZ Tanzania LS Lesotho NI Nigeria Nicaragua SG Singapore UA Ukraine LT Lithuania NL Netherlands SH Saint Helena UG LU Luxembourg NO SI Slovenia UK LV Latvia NP Norway Nepal SJ Svalbard and Jan UM Uganda United Kingdom USA Minor Outlying LY Libya NR Nauru SK Slovak US United States MA Morocco NU Niue S
Specifications General OutputPower..............................................................................50Wx4CH(Max.) PowerSource......................................................................................DC12V Speakerimpedance.....................................................................................4Ω GroundSystem.................................................................................Negativetype Dimensions(WxHxD)....................................................
P/NO : 3834RR0007P
