MFL63749073 OWNER’S MANUAL LG HEAT PUMP DRYER Please read this manual carefully before operating your dryer and retain it for future reference.
MFL63749073 F eatures Ultra big Capacity Drum The ultra big capacity drum on this LG dryer allows you to dry more washing at once, saving time! Lower Energy Consumption Energy LG Heat pump dryers use less energy than conventional dryers due to optimized heat exchanger and self cleaning technology. This LG Heat pump dryer has been designed to save your money. Reduced Drying Times save Drying times are now shorter due to Hybrid heating system and optimized heat exchanger on this LG dryer.
MFL63749073 S afety Instructions WARNING • Serious injury or death may occur when not observing the following rules. • This product must only be used for its intended purpose. The instructions provided in this manual must be adhered in order to minimise the risk of damage to the unit and serious injury. • Repairs or internal maintenance required by the dryer must only be carried out by a qualified technical person.
MFL63749073 S afety Instructions Safety Instructions • Do not remove the top plate when installing the dryer. • Do not modify this product. No doing so may cause a malfunction, fire or electric shock. • Keep the dryer away from ovens, naked flames, or any other flammable objects. They may cause a fire or parts of the dryer to melt. • Do not use a damaged power cord or place heavy objects on the cord. A damaged power cord may cause fire or electric shock. • Do not touch the plug or switch with wet hands.
MFL63749073 S afety Instructions • Items made of foam, rubber, plastic, or other heat-sensitive fabrics (such as bathroom rugs, nonslip mats or raincoats) must not be dried in a tumble dryer on a heat setting. • Items such as foam rubber (latex foam), shower caps, waterproof nappy covers, and textiles, rubber backed articles and clothes or pillows fitted with foam rubber pads should not be dried in the tumble dryer. Doing so may cause spontaneous combustion leading to an explosion and fire.
MFL63749073 Installation Instructions I nstallation Instructions The following instructions will guide you through the initial steps of setting up your dryer. Please note that every section of this manual provides important information regarding the preparation and use of your dryer, and it is important that you review this entire manual before proceeding with any installation or use. Be sure to observe all listed warnings and cautions.
MFL63749073 I nstallation Instructions Stacking Kit In order to stack this dryer an LG stacking kit is required. Washer This dryer may only be stacked on top of an LG washer. DO NOT attempt to stack this dryer on any other washer, as damage, injury or property damage could result. • Incorrect installation can cause serious accidents. • The weight of the dryer and the height of installation makes the stacking procedure too risky for one person.
MFL63749073 I nstallation Instructions Installation Instructions Earthing Instructions This appliance must be earthed. In the event of malfunction or breakdown, earthing will reduce the risk of electric shock by providing a path of least resistance for the electric current. This appliance is equipped with a earthed cord and an earthing plug. The plug must be plugged into an appropriate outlet that is properly installed and earthed in accordance with Standard.
MFL63749073 I nstallation Instructions Level the Dryer 1. Leveling the dryer prevents unnecessary noise and vibration. Place your dryer on a solid, level floor. 2. If the dryer is not properly level, adjust the front levelling feet as necessary. Turn them clockwise to raise and counter-clockwise to lower until the dryer no longer wobbles, both front-to-back and side-to-side and corner-to-corner.
MFL63749073 I nstallation Instructions Connecting water supply hose Installation Instructions The dryer must be connected to the cold water tap using the new water supply hose. Do not use old hoses. Note • • • • Water supply pressure must be between 100 kPa and 1000 kPa (1.0 - 10.0 kgf / cm2). Do not strip or cross-thread when connecting inlet hose to the valve. If the water supply pressure is more than 1000 kPa, a decompression device should be installed.
MFL63749073 I nstallation Instructions Step4 : Turn on cold water tap. Check for leaks. Check that the water taps are turned on. Check for leaks around “Y” connector, tap, and hoses. Note • After completing connection, if water leaks from the hose, repeat the same steps. 11 Installation Instructions Step3: Connect hose to dryer. • Connect the water supply hoses to the COLD water tap tightly by hand and then tighten another 2/3 turn with plier.
MFL63749073 A ppearance & Design Product Layout Control Panel Appearance & Design Water Container Door Air Ventilation Grille Control Panel SmartDiagnosis™ function is available only for the products with a SmartDiagnosis™ mark.
MFL63749073 O perating Your Dryer Cycle Selection Table Sensor Dry Cycle Cycle Cotton Easy care Bulky Item Jeans Detail For thick and quilted fabrics Extra For thick and quilted fabrics that do not need to be ironed Very For fabrics that do not need to be ironed Cupboard For fabrics that do not need to be ironed Light For fabrics that do need to be ironed Iron For thick and quilted fabrics that do not need to be ironed For fabrics that do not need to be ironed Very For fabrics that do need t
MFL63749073 O perating Your Dryer Please read before using your LG dryer for the first time After removing the packaging, please carry out the following checks to ensure the LG dryer is correctly installed and ready for use. (See installation instructions) 1. Check the dryer is well balanced by using a spirit level. If not, adjust the feet of the LG dryer until the machine is balanced. 2. Check the water container, filter, control panel and drum to make sure everything is in place. 3.
MFL63749073 O perating Your Dryer Select the desired cycle. 5. Close the door. Before you close the door, make sure fabrics are well placed inside and that foreign objects, especially flammable ones, are not caught around door. CAUTION - Be careful not to trap laundry between the loading door and rubber seal. 6. Select the drying cycle you want. You can choose a cycle by turning the cycle selector knob until the required cycle is indicated.
MFL63749073 O perating your dryer Rack Dry The dryer rack is placed inside the dryer like the picture. Remove and discard packing material before use. The Rack Dry is designed for use with items that must be dried flat, without tumbling, including sweaters and delicate fabrics. Note Check the filter and remove any lint accumulated from items dried on the Rack. If preferred, set up Eco by pressing Eco Hybrid button. Operating Your Dryer To use the Rack Dry : 1. Open the door. 1.
MFL63749073 A dditional Functions Option buttons High 1% 1:00 Time Left Dry - Cycle selector Start/Pause Power • Press the Power button to turn power on and off. • To cancel the Time Delay function, the power button should be pressed. Cycle selector • Cycles are available according to the laundry type. • The lamp will light up to indicate selected cycle. Start/Pause • This Start/Pause button is used to start dry cycle or pause the dry cycle.
MFL63749073 A dditional Functions Time Delay You can use the Time Delay option to delay the finishing time of drying cycle. Maximum Time Delay is 19 hours. Minimum Time Delay is 3 hours. 1. Turn the dryer on. 2. Select a cycle. 3. Set time delay hour by press the “ ”, “ ” button. 4. Press Start/Pause button. Additional Functions Anti-Crease The Anti-Crease option prevents creases that are formed when the laundry is not unloaded promptly at the end of the drying cycle.
MFL63749073 C aring for Your Dryer Care and Cleaning is very Important Empty Water Container It’s not difficult to care for your dryer but it is important that you do care for it. Follow the instructions below. Condensed water is collected in the water container. Empty the water container after every use. Not doing so will affect the drying performance. If the water container is full, the “Empty Water” lamp glows and the buzzer sounds while the dryer is operating.
MFL63749073 C aring for Your Dryer Ventilation Grille and Cool Air Inlet Grille Vacuum the front ventilation grille 3-4 times a year to make sure there is no build up of lint or dirt that may cause improper air flow. 3. Connect drain hose to the kit. Moisture Sensor? Caring for Your Dryer Note - Warm air is exhausted through the ventilation grille. - Adequate ventilation should be provided to avoid the back flow of gases into the room from units burning other fuels, such as open fires.
MFL63749073 C aring for Your Dryer Before cleaning the dryer's interior, unplug the power cord to avoid electric shock hazards. • Turn off the stopcock if the machine is to be left for any length of time (e.g. holiday), especially if there is no floor drain (gully) in the immediate vicinity. The water inlet filter •" " icon will be displayed on the control panel when water does not enter the dryer. • If water is very hard or contains traces of lime deposit, the water inlet filter may become clogged.
MFL63749073 A dditional Tips for Smart Use Additional Tips for Smart Use Drying Guide CYCLE Capacity of dryer Extra Very Cupboard Cotton Light Iron Very Mixed Cupboard Fabric Iron Cupboard Easy Care Iron Bulky Item Jeans Steam Hygiene Steam Refresh Sports Wear Quick Dry Delicate Wool 9 kg 9 kg 9 kg 9 kg 9 kg 4.5 kg 4.5 kg 4.5 kg 4 kg 4 kg 2 kg 3 kg 3 kg Dress Shirts Max.5EA 2 kg 3 kg 1.5 kg 1 kg Woollens Dry woollens on ‘’wool’’ cycle. Be sure to follow fabric care label "symbols“ first.
MFL63749073 A dditional Tips for Smart Use Spare Parts Accessory Parts Spare parts that are required under the terms of warranty are provided free of charge. If the warranty has expired then spare parts must be purchased from the service center. • Your dryer comes with accessories such as: 1. Condensing Drain Hose and Hose Holder (Purchased Separately) Disposal of the Dryer 2.
MFL63749073 T roubleshooting Guide Troubleshooting Tips To save you time and money, the following page will help answer your questions before service call. Troubleshooting Guide Questions What to do Dryer won’t run 1. 2. 3. 4. 5. Check dryer is plugged in. Check "Start/Pause" button is pressed. Check door is properly closed. Check room temperature is below 5°C. Check a fuse is blown or the circuit breaker is tripped and replace them.
MFL63749073 T roubleshooting Guide Error Mode • ERROR The door is open. Please close the door completely. : The door must be closed and Start/Pause button must be pressed for re-operation.If error message continues to occur, unplug the power cord and call the service center for advice.
MFL63749073 T roubleshooting Guide Note SmartDiagnosis™ function is available only for the products with a SmartDiagnosis™ mark. In case of a mobile phone with static option, the smart diagnosis function may not operate. Using SmartDiagnosis™ • Only use this feature when instructed to do so by the call center. The transmission sounds similar to a fax machine, and so has no meaning except to the call center. • SmartDiagnosis™ cannot be activated if the dryer does not power up.
MFL63749073 T echnical Data 850 mm 640 mm 600 mm Ventilation Requirement Electrical Requirements Australia, New Zealand 230-240 V Hertz Watts Alcove or under counter Closet 50 Hz 1800 Ensure air flow of 112 cu.ft./min through dryer Closet door must have 2(louvered) openings, each having a minimum area of 60 sq. inches (387 sq.cm), located 3 inches (8 cm) from bottom and top of door. Ensure you connect the dryer to the correct electricity voltage.
MFL63749073 D isposal notice Disposal of your old appliance 1. All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. 2. The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health. 3.
MFL63749073 M emo 29
MFL63749073 M emo 30
MFL63749073 M emo 31
MFL63749073
