OWNER’S MANUAL DRYER Before beginning installation, read these instructions carefully. This will simplify installation and ensure that the product is installed correctly and safely. Leave these instructions near the product after installation for future reference. TD-C80NPW TD-C90NPE MFL67653085 Rev.01_062717 www.lg.
TABLE OF CONTENTS This manual may contain images or content different from the model you purchased. This manual is subject to revision by the manufacturer. SAFETY INSTRUCTIONS........................................................03 IMPORTANT SAFETY INSTRUCTIONS................................................... 03 INSTALLATION.........................................................................09 Specifications.......................................................................................
SAFETY INSTRUCTIONS The following safety guidelines are intended to prevent unforeseen risks or damage from unsafe or incorrect operation of the appliance. The guidelines are separated into ‘WARNING’ and ‘CAUTION’ as described below. This symbol is displayed to the indicate matters and operations that can cause risk. Read the part with this symbol carefully and follow the instructions in order to avoid risk.
Installation ••Make sure the appliance is properly installed, grounded, and adjusted by qualified service personnel according to the installation instructions. ••Never attempt to operate this appliance if it is damaged, malfunctioning, partially disassembled, or has missing or broken parts, including a damaged cord or plug. ••This appliance should only be transported by two or more people holding the appliance securely. ••Do not install the appliance in a damp and dusty place.
••Improper connection of the equipment-grounding conductor can result in risk of electric shock. Check with a qualified electrician or service person if you are in doubt as to whether the appliance is properly grounded. ••Do not modify the plug provided with the appliance. If it does not fit the outlet, have a proper outlet installed by a qualified electrician. Operation ••Do not attempt to separate any panels or disassemble the appliance.
••In case of flood, disconnect the power plug and contact the LG Electronics customer information centre. ••Do not push down on the door excessively, when the appliance door is open. ••Use new hose or hose-set supplied with the appliance. Reusing old hoses can cause a water leak and subsequent property damage. ••Do not touch the door during steam or drying programmes.
••Never unplug the appliance by pulling on the power cable. Always grip the power plug firmly and pull straight out from the socket outlet. Technical Safety for Using the Appliance ••Do not dry unwashed items in the appliance. ••Fabric softeners, or similar products, should be used as specified by the fabric softener instructions. ••Remove all objects from pockets such as lighters and matches.
••Remove clothes from the product immediately when drying is complete or the power is turned off during the drying process. Leaving clothes that has been dried in the appliance unattended could result in fire. Clothes removed from the appliance after drying could result in fire. Remove clothes immediately after drying, and then hang or lay the clothes flat to cool. ••Oil-affected items can ignite spontaneously, especially when exposed to heat sources such as in a tumble dryer.
INSTALLATION Specifications Water container Control panel Glass door Opaque door Condenser cover Air ventilation grill Model Power supply Size Product weight Allowable temperature Max. capacity TD-C80NPW TD-C90NPE 220 - 240 V~, 50 Hz 600 mm (W) X 640 mm (D) X 850 mm(H) 43 - 46 kg 5 - 35 °C 8 kg 9 kg •• Appearance and specifications may vary without notice to improve the quality of the appliance. Accessories (Optional) Please contact the LG Electronics Customer Information Centre for purchase.
Installation Place Requirements Positioning Location •• Install the appliance on a flat hard floor. •• Make sure that air circulation around the appliance is not impeded by carpets, rugs, etc. •• Never try to correct any unevenness in the floor with pieces of wood, cardboard or similar materials under the appliance. •• Do not install the appliance in rooms where freezing temperatures may occur. Frozen hoses may burst under pressure.
WARNING •• Avoid installing the appliance around a heat source.The rear side of the appliance must be well ventilated. Failure to follow these instructions may result in problems. •• The appliance should not be installed next to a refrigeration appliance. •• The appliance is not designed for maritime use or for use in mobile installations such as caravans, aircraft etc. Electrical Connection •• Do not use an extension cord or double adapter. •• Always unplug the appliance after use.
Installation Procedure 1 Place the LG dryer on the LG washing machine. 2 Remove the two screws from the bottom of the rear cover on each side as illustrated below. 3 Align the stacking kit holes and the rear cover holes. 3-1) 600 mm 3-2) 550 mm 4 Fasten the two screws that were removed earlier from the dryer to the stacking kit. 5 Use the four screws in the accessory box (16 mm) to assemble the washing machine rear cover and stacking kit. 6 The procedure for the opposite side will be the same.
Condensed Water Drain-out Leveling the Appliance Normally, condensed water is pumped up to the water container where water is collected until manually emptied. Water can also be drained out directly to a mains drain, especially when the dryer is stacked on top of a washing machine. With a connecting kit for the mains drain hose, simply change the water path and re-route to the drainage facility as below: Leveling the appliance prevents unnecessary noise and vibration.
OPERATION Using the Appliance Before the first cycle, set the appliance to dry for five minutes to warm up the drum. Open the door between loads the first few times you use the appliance to allow any odours from the interior of the appliance to disperse. 1 CAUTION •• Be careful not to trap laundry between the door and rubber seal. 3 Turn the power on. •• Press the Power button. The indicator icon above the button will become illuminated, indicating that the appliance is all set to run.
CAUTION •• Be careful! The drum inside may still be hot. •• The appliance must not be used for purposes other than those for which it was designed. NOTE •• The final part of a tumble dryer cycle occurs without heat (cool down cycle) to ensure that laundry is left at a temperature that ensures the laundry will not be damaged. •• A high atmospheric temperature and a small room may both increase drying time as well as energy consumption.
Control Panel Power button •• Press the Power button to turn power on and off. •• Press the Power button to cancel the Time Delay function. Programme Selector •• Programmes are available according to the laundry type. •• The lamp will light up to indicate the selected programme. Display •• : This icon indicates that the lint filter should be cleaned or is clogged. –– Cleaning notice: When you press the Power button, the icon will become displayed.
Programme Table Drying Programme Sensor Dry Programmes Programme Cotton Mixed Fabric Easy Care Bulky Item Jeans Laundry Type Detail Drying Level Towels, dressing gowns and bed linen For thick and quilted fabrics Extra Terry towels, tea towels, towels and bed linen For thick and quilted fabrics that do not need to be ironed Very Bath towels, tea towels, underwear and cotton socks For fabrics that do not need to be ironed Cupboard Sheets, pillowcase and towels For fabrics that do not need to
Sensor Dry Programmes Programme Laundry Type Detail Drying Level T-shirts, pillowcase, and towels For cotton fabrics which do not need to be ironed - Sports Wear Soccer kit and training wear For polyester material - Quick Dry Linen and towels (excluding delicate fabrics) sports wear, bulky Item cycle.
Option Cycle Drum Light Time Delay You can use the Time Delay option to delay the finishing time of the drying cycle. Maximum Time Delay is 19 hours. Minimum Time Delay is 3 hours. Whilst the appliance is running it is possible to see inside the drum if you select the Drum Light function. •• Light on : Door is opened. •• Light off : Door is closed. The light is turned off automatically. 1 Turn the appliance on. 2 Select a programme. 3 Press the Time Delay button.
Damp Dry Beep Child Lock ( With this option, the appliance will beep when the load is ready for ironing. This allows you to remove faster-drying lightweight items or items that you would like to iron or hang while still slightly damp. Select this function to lock the buttons on the control panel to prevent tampering. 1 Turn the appliance on. 1 2 Select a programme. 3 Press the Dry level button and select a level. 4 Press the Option button and select Damp Dry Beep.
Rack Dry (Optional) The dryer rack is placed inside the appliance, as in the picture below. Remove and discard packing material before use. The Rack Dry is designed for use with laundry that must be dried flat, without tumbling, including sweaters and delicate fabrics. 1 Open the door. 2 Insert the hook to the drum centre. 3 Place the dryer rack on the structure above the lint filter and press it to complete assembly. 4 Place wet items on top of the rack.
SMART FUNCTION Using Smart Function (Optional) Using the Tag On Function The Tag On function allows you to conveniently use the LG Smart Diagnosis™ and Cycle Download features to communicate with your appliance right from your own smart phone. •• The Tag On function can only be used with most smart phones equipped with the NFC function and based on the Android operating system (OS). Installation of the application •• Search LG Smart Laundry&DW Global on the Google Play Store from your smart phone.
Using the Smart Diagnosis™ Function Use this function if you need an accurate diagnosis by an LG Electronics Customer Information Centre when the product malfunctions or fails. Use this function only to contact the service representative, not during normal operation. 1 Press the Power button to turn on the appliance. Do not press any other buttons or turn the programme selector knob.
MAINTENANCE WARNING •• Remove the power plug when you clean the appliance. Not removing the plug may result in electric shock. 5 Dry the lint filter completely, close and reinsert the lint filter. Cleaning the Lint Filter Clean the lint filter before each drying cycle. It should also be cleaned if the icon becomes illuminated and the buzzer sounds while the appliance is in operation. Cleaning the lint filter will reduce drying time and energy consumption. 1 Open the door. 2 Remove the lint filter.
Emptying the Water Container Cleaning the Cool Air Inlet Grill Condensed water is collected in the water container. Empty the water container after every use. Not doing so will affect the drying performance. Vacuum the Cool Air Inlet grill 3 - 4 times a year to make sure there is no build up of lint or dirt that may cause improper air flow. If the water container is full, the icon glows and the buzzer sounds while the appliance is operating.
Cleaning the Condenser The condenser is also a very important part for efficient drying performance result, so it needs special care from you. It is recommended that the condenser be cleaned three or four times a year or when the icon blinks. 1 Push the cap and open the condensing cover. 2 Open the seal by turning the locking lever. 3 4 Clean the condenser thoroughly under a tap, letting the water flow through. 5 Put everything back together by following the instructions in reverse order.
TROUBLESHOOTING The appliance is equipped with an automatic error-monitoring system to detect and diagnose problems at an early stage. If the appliance does not function properly or does not function at all, check the following before you call for service: Diagnosing Problems Symptoms Appliance will not turn on Appliance does not heat Reason Solution Power cord is not properly plugged in. •• Make sure that the plug is securely plugged into a grounded outlet matching the appliance’s rating plate.
Symptoms Reason House fuse is blown, circuit breaker has tripped, or power outage has occurred. •• Reset circuit breaker or replace fuse. Do not increase fuse capacity. If the problem is a circuit overload, have it corrected by a qualified electrician. Appliance is overloaded. •• Divide extra large loads into smaller loads for better drying performance and efficiency. Appliance is underloaded. •• If you are drying a very small load, add a few extra items to ensure proper tumbling action.
Symptoms Clothes are wrinkled Clothes are shrinking Lint is left on clothes Reason Solution Clothes have dried too long (overdried). •• Over drying a load of laundry can lead to wrinkled clothes. Try a shorter drying time. Clothes have been left in the appliance for too long after cycle ends. •• Use the Anti crease option. Garment care instructions are not being followed. •• To avoid shrinking your clothes, always consult and follow fabric care instructions.
Symptoms Water leaks Clothes have damp spots after a Sensor Dry programme 30 Reason Solution The water container hose or the drain hose is not connected correctly. •• Connect the water container hose or the drain hose correctly. The door is closed while laundry or foreign substance is caught in the door. •• Check if laundry or foreign substance is caught in the door before using the appliance. If water leaks continuously, contact the LG Electronics Customer Information Centre.
Error Codes Symptoms dE tE1 tE3 Reason Solution The door has been opened while the appliance is in operation or the appliance is being operated without the door being closed properly. •• Close the door completely. •• If dE is not released, call for service. Temperature Sensor has malfunctioned. •• Unplug the power plug and call for service.