Owner’s Manual
Table Of Contents
- Quick Guide
- Exploring the Product
- Connecting with Bluetooth for Use
- Listening to Sound with Earbuds
- Connecting to an External Device for Use (Plug and Wireless Mode)
- Charging
- Connecting to the Bluetooth App
- Safety Precautions
- Things to Check before Reporting Malfunction
- Appendix
- Safety Information
- Cleaning Guide
5
4. Charging ([ Please refer to “Charging by Wire”, “ Charging
Wirelessly” and “Description on UVnano” on pages 19, and 20.)
Wired charging
Connect the charging cable to charge the charging case with earbuds. The earbuds and charging case are charged
at the same time.
• If you charge the device with the earbuds attached and the cover closed, the UVnano LED operates for 10
minutes.
Wireless charging
Place the charging case on the center of the wireless charger.
• If you charge wirelessly, UVnano sterilization is performed for 10 minutes and charging starts.
> Caution
• Please note that the temperature of the earbuds may become higher while the UVnano LED is operating.
5. Connecting the LG TONE Free app ([ Please refer to “Connecting
the LG TONE Free App” on page 22.)
a Search for “LG TONE Free” on Google Play Store or App Store on your smartphone or scan the QR code below
to install the LG TONE Free app.
b Runtheapptousevariousfunctions(checkingtheearbudsbattery,voicenotication,changingtheequalizer
mode, checking the information on the last connected location, searching for my wireless earbuds, etc.) Only
Android 7.0 or iOS 13 or higher is supported.
<Android>
<iOS>