RADIO CASSETTE RECORDER Owner's Manual MODEL: TW-880T Please read this manual carefully before operating P/N : your set.
To reduce the risk of fire expose this appliance or electric shock, do not To avoid electrical shock; do not open the to rain or moisture. cabinet. Refer servicing to qualified personnel only. Shock hazard RISK OF ELECTRIC SHOCK, DO NOT OPEN - CAUTION Use of controls or other than those adjustments or performance specified herein may result of procedures in hazardous radiation exposure.
Front View 1 2345 67 8 9 10 12 Back View 13 11 16 14 15 19 18 17 1. SPEAKER (L) 11. DECK B controls 2. Microphone input socket 12. DECK A controls 3. VOLUME knob 13. SPEAKER release lever 4. CD/LINE IN input socket TUNING control knob 14. 6. FUNCTION switch 16. RIF/FM 7. BAND switch 17. 8. SPEAKER (R) FM STEREO indicator 18. 5. 9. Telescopic antenna 15. SPEAKER 19. 10.
Power Source A The AC Power cord Connection Set (see fig. A ) connecting the AC power cord, check that the operating voltage of your unit is identical with the voltage of your local power supplied. 1. Before 2. Connect one end of the AC power cord(supplied) to the AC IN socket located at to mains the backside of your set. (wall outlet) B 3. Plug the other end into the wall outlet. Unplug the AC power cord from the wall outlet if you do not to use for an extended period of time.
Speaker Set 1. Lead Connection (see fig. D Sound ) VOLUME: Plug the right speaker lead into the "R" speaker socket located at the backside of Turn VOLUME clockwise to increase the sound level, your set. 2. Adjustment Plug the left speaker lead into the "L". or anti-clockwise to decrease it. Bass UBB(Ultra Booster) Additional bass accentation. Speaker Set 1. Detachment (see fig. E ) Unplug the speaker leads. 2. Press the speaker release lever and slide the speaker up.
Cassette Operation Auxiliary Equipment You may connect additional 1. Set FUNCTION to TAPE. 2. Open the cassette door ST/EJ. (Deck A 3. Insert a or 5. Press again 6. Press by pressing PLAY or ) player Use RCA phono type connectors when connecting any additional appliance. push close the door. PLAY PLAY( playback. to PAUSE() to pause. Press PAUSE play. to resume F.FWD( forward or ) or REW( ) to fast rewind the tape. ST/EJ to stop play. 7.
Cassette Specifications Operation NOTE: 1. RADIO SECTION Recording levels have been preset at the factory under optimum conditions and cannot be Frequency range(optional) MW(AM) ...................................515~1650kHz changed. FM .....................................87.35~108.25MHz 2. Your set can record onto Normal; SW1 ............................................2.2~7.3MHz CrO2 tapes and metal tapes cannot be used. Basic SW2 Recording 6.8~22.5MHz frequencies MW(AM)/SW.............
