Owner's Manual

IMPORTANT SAFETY INSTRUCTIONS
7
ENGLISH
• Wear adequate personal protection equipment (PPE) when installing,
maintaining or servicing the product.
• If the supply cord is damaged, it must be replaced by a special cord or assembly
available from the manufacturer of its service agent.
• Pipe-work shall be protected from physical damage.
• Keep Level parallel in installing the product. Otherwise, it may cause vibration or
water leakage. It may cause injury or an accident.
Operation
• Do not use the product for special purposes, such as preserving foods, works of
art, etc. It is a consumer air conditioner, not a precision refrigeration system.
There is risk of damage or loss of property.
• Do not block the inlet or outlet of air flow. It may cause product failure.
• Use a soft cloth to clean. Do not use harsh detergents, solvents or splashing
water etc. There is risk of fire, electric shock, or damage to the plastic parts of
the product.
• Do not touch the metal parts of the product when removing the air filter. There
is risk of personal injury.
• Do not step on or put anyting on the product. (outdoor units) There is risk of
personal injury and failure of product.
• Always insert the filter securely after cleaning. Clean the filter every two weeks
or more often if necessary. A dirty filter reduces the efficiency.
• Do not insert hands or other objects through the air inlet or outlet while the
product is operating. There are sharp and moving parts that could cause
personal injury.
• Be cautious when unpacking and installing the product. Sharp edges could
cause injury.
• If the refrigerant gas leaks during the repair, do not touch the leakaing
refrigerant gas. The refrigernat gas can cause frostbite (cold burn).
• Do not tilt the unit when removing or uninstalling it. The condensed water inside
can spill.
• Do not mix air or gas other than the specified refrigerant used in the system. If
air enters the refrigerant system, an excessively high pressure results, causing
equipment damage or injury.
• If the refrigerant gas leaks during the installation, ventilate the area immediately.
Otherwise it can be harmfull for your health.
• Dismantling the unit, treatment of the refrigerant oil and eventual parts should
be done in accordance with local and national standards.
• Replace the all batteries in the remote control with new ones of the same type.
Do not mix old and new batteries or different types of batteries. There is risk of
fire or product failure.