LED TV UV34** AAA a 65UV34** c X4 (M5 X L20) 65UV34** d X4 (M4 X L20) 65UV34** g X4 (M5 X L12) 75UV34** h X4 (M4 X L20) 75UV34** b e f 75UV34** www.lg.
65UV34** 1 2 3 c b a 4 5 6 d a + b
75UV34** 1 2 3 f e 5 4 6 h g e + f
75UV34** 7 8
ANTENNA/ CABLE IN HDMI IN HDMI IN/ARC USB IN H/P OUT CLOCK
Satellite IN PCMCIA CARD SLOT OPTICAL DIGITAL AUDIO OUT
1 2 3 4
0 1 A 2 E D B G F C A B C D E F F G 65UV341C-ZC 1456 902 335.9 841 64.8 27.6 26.0 75UV341C-ZC 1697 1038 367.5 981 65.3 44.3 41.
OWNER’S MANUAL Safety and Reference LED TV* * LG LED TV applies LCD screen with LED backlights. Please read this manual carefully before operating your set and retain it for future reference. www.lg.
Safety instructions ENGLISH Please read these safety precautions carefully before using the product.
Des ENGLISH Do not drop the product or let it fall over when connecting external devices. Otherwise, this may result in injury or damage to the product. Do not drop metallic objects such as coins, hair pins, chopsticks or wire into the product, or inflammable objects such as paper and matches. Children must pay particular attention. Electrical shock, fire or injury can occur. If a foreign object is dropped into the product, unplug the power cord and contact the service centre.
ENGLISH If any of the following occur, unplug the product immediately and contact your local service centre. • The product has been impacted by shock • The product has been damaged • Foreign objects have entered the product • The product produced smoke or a strange smell This may result in fire or electric shock. Be careful in handling the adapter to prevent any external shocks to it. An external shock may cause damage to the adapter.
When connecting external devices such as video game consoles, make sure the connecting cables are long enough. Otherwise, the product may fall over, which may cause injury or damage the product. We recommend that you maintain a distance of at least 2 to 7 times the diagonal screen size when watching TV. If you watch TV for a long period of time, this may cause blurred vision. Do not turn the product On/Off by plugging-in or unplugging the power plug to the wall outlet.
ENGLISH Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. When moving the product, make sure you turn the power off first. Then, unplug the power cables, antenna cables and all connecting cables. The TV set or power cord may be damaged, which may create a fire hazard or cause electric shock.
Viewing 3D imaging (Only 3D models) CAUTION Displaying a still image for a prolonged period of time may cause image sticking. Avoid displaying a fixed image on the TV screen for a long period of time. Generated Sound “Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required.
Preparing CAUTION ENGLISH NOTE • If the TV is turned on for the first time after it was shipped from the factory, initialization of the TV may take a few minutes. • Image shown may differ from your TV. • Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual. • The available menus and options may differ from the input source or product model that you are using. • New features may be added to this TV in the future.
Using the button Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. (Depending on model) You can simply operate the TV functions, using the button. • It is recommended to move the TV in the box or packing material that the TV originally came in. • Before moving or lifting the TV, disconnect the power cord and all cables. • When holding the TV, the screen should face away from you to avoid damage.
ENGLISH Attaching the TV to a desk Power On (Press) Power Off 1 (Press and Hold) Menu Control (Press 2) Menu Selection (Press and Hold 3) 1 All running apps will close, and any recording in progress will stop. (This feature is not available for all models.) 2 You can access and adjust the menu by pressing the button when TV is on. The TV should be attached to a desk so it cannot be pulled in a forward/ backward direction, potentially causing injury or damaging the product.
Adjusting the angle of the TV to suit view (This feature is not available for all models.) (This feature is not available for all models.) The Kensington security system connector is located at the rear of the TV. For more information of installation and using, refer to the manual provided with the Kensington security system or visit http://www. kensington.com. Connect the Kensington security system cable between the TV and a table.
Separate purchase(Wall Mounting Bracket) 43UW76** 32/43LW64** 43UW95** VESA (A x B) (mm) 200 x 200 Standard screw M6 Number of screws 4 Wall mount LSW240B bracket MSW240 65UW96** Model 65UV34** 300 x 300 M6 4 LSW350B MSW240 75UW34** 75UV34** VESA (A x B) (mm) 300 x 300 600 x 400 Standard screw M6 Model ENGLISH M6 49/55UW76** 49/55UW96** Number of screws 4 4 Wall mount bracket LSW640B LSW350B A NOTE • When installing the wall mounting bracket, use the adhesive label or protective cover provid
Connections (notifications) Antenna connection Connect the TV to a wall antenna socket with an RF cable (75 Ω). Available external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices. NOTE • The external device connection may differ from the model. • Connect external devices to the TV regardless of the order of the TV port.
Speaker Output Setup Network Setup (Depending on model) Wired network connection ENGLISH (Depending on model) This TV can be connected to a Pro:Centric server via the LAN port. After making the physical connection, the TV needs to be set up for network communication. Connect the LAN port of the Modem or Router from Pro:Centric server to the LAN port on the TV.
Other connections Connect your TV to external devices. For the best picture and audio quality, connect the external device and the TV with the HDMI cable. Some separate cable is not provided. General A HDMI ULTRA HD Deep Colour -- On : Support 4K @ 50/60 Hz (4:4:4, 4:2:2, 4:2:0) -- Off : Support 4K @ 50/60 Hz 8 bit (4:2:0) If the device connected to Input Port also supports ULTRA HD Deep Colour, your picture may be clearer. However, if the device doesn’t support it, it may not work properly.
Licenses ENGLISH C D Supported licenses may differ by model. For more information about licenses, visit www.lg.com. Manufactured under license from Dolby Laboratories. Dolby, Dolby Vision, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories. The terms HDMI and HDMI High-Definition Multimedia interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. C Shows programme guide.
Specifications The software version can be updated for improvement in performance. Customer needs to ensure the compatibility of customer’s equipment with LGE software. If needed, please consult with LGE and upload revised software version according to the guidance provided by LGE. Wireless module specification Cannot control the TV with the remote control. • Check the remote control sensor on the product and try again. • Check if there is any obstacle between the product and the remote control.
CI Module (W x H x D) ENGLISH Environment condition 100.0 mm x 55.0 mm x 5.
HDMI-DTV supported mode HDMI-PC supported Mode • PC audio is not supported • Use HDMI IN 1 for PC mode (Depending on model) Horizontal Frequency (kHz) Vertical Frequency (Hz) 720 x 480 31.47 31.50 59.94 60.00 Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) 720 x 576 31.25 50.00 640 x 350 31.46 70.09 1280 x 720 44.96 45.00 37.50 59.94 60.00 50.00 720 x 400 31.46 70.08 640 x 480 31.46 59.94 50.00 59.94 60.00 23.97 24.00 29.97 30.00 50.00 59.94 60.00 800 x 600 37.
3D supported mode (Only 3D models) ENGLISH • Video, which is input as below media contents is switched into the 3D screen automatically. The method for 3D digital broadcast may differ depending on the signal environment. If video is not switched automatically into 3D, manually convert the settings to view 3D images. For models supporting Miracast / Intel® WiDi, you can set the 3D mode. 3D supported mode automatically Input RF Signal Horizontal Frequency (kHz) Vertical Frequency (Hz) 1280 x 720 37.
3D supported mode manually Signal Input Horizontal Frequency (kHz) 1024 x 768 48.36 1920 x 1080 67.50 54.00 24.00 3840 x 2160 56.25 25.00 67.50 30.00 54.00 24.00 4096 x 2160 Vertical Frequency (Hz) 60.00 Others - - 720 x 480 31.50 60.00 720 x 576 31.25 50.00 45.00 60.00 37.50 50.00 33.75 60.00 28.13 50.00 27.00 24.00 28.12 25.00 33.75 30.00 67.50 60.00 56.25 50.00 53.95 23.98 54.00 24.00 56.25 25.00 61.43 29.97 67.50 30.00 112.50 50.00 135.00 60.
3D supported mode manually Signal Input ENGLISH Vertical Frequency (Hz) 37.50 50.00 45.00 60.00 44.96 59.94 33.75 60.00 33.72 59.94 28.12 50.00 67.50 60.00 67.43 59.94 27.00 24.00 28.12 25.00 56.25 50.00 26.97 23.98 33.75 30.00 33.71 29.
Photo format File Format Format Resolution .jpeg, .jpg, .jpe JPEG Minimum: 64 (W) x 64 (H) Maximum: 15,360 (W) x 8,640 (H) / Progressive Type: 1,920 (W) x 1,440 (H) .png PNG .bmp BMP .jps JPS .mpo MPO Extension Video VC-1 Advanced Profile (WMVA excluded), VC-1 Simple and Main Profiles Minimum: 64 (W) x 64 (H) Maximum: 5,760 (W) x 5,760 (H) Audio WMA Standard (WMA v1/WMA Speech excluded) Minimum: 64 (W) x 64 (H) Maximum: 1,920 (W) x 1,080 (H) Video XViD(except 3 warp-point GMC), H.
IR CODES • This feature is not available for all models.
EXTERNAL CONTROL DEVICE SETUP Type of Connector : D-Sub 9-Pin Male 1 5 ENGLISH RS-232C Setup • Image shown may differ from your TV. Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. Connect the serial port of the control device to the RS-232C jack on the product back panel. • RS-232C connection cables are not supplied with the product.
RS-232C Configurations Command Reference List (Depending on model) 7-Wire Configurations (Standard RS-232C cable) RXD TXD GND DTR DSR RTS CTS PC 2 3 5 4 6 7 8 TV 3 2 5 6 4 8 7 D-Sub 9 D-Sub 9 TXD RXD GND DSR DTR CTS RTS 3-Wire Configurations (Not standard) RXD TXD GND DTR DSR RTS CTS PC 2 3 5 4 6 7 8 TV 3 2 5 6 4 7 8 D-Sub 9 D-Sub 9 Communication Parameters • • • • • • Baud rate: 9600 bps (UART) Data length: 8 bits Parity : None Stop bit: 1 bit Communication
Transmission / Receiving Protocol (Depending on Model) ENGLISH Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the set ID to choose desired monitor ID number in option menu. Adjustment range is 1 to 99. When selecting Set ID ‘0’, every connected set is controlled.
03. Screen Mute (Command: k d) ►To ► select screen mute on/off. Data 00 : Screen mute off (Picture on) Video mute off 01 : Screen mute on (Picture off) 10 : Video mute on Ack [d][ ][Set ID][ ][OK/NG][Data][x] * In case of video mute on only, TV will display On Screen Display(OSD). But, in case of Screen mute on, TV will not display OSD. 04. Volume Mute (Command: k e) ►To ► control volume mute on/off. You can also adjust mute using the MUTE button on remote control.
08. Colour (Command: k i) ►To ► adjust the screen Colour. You can also adjust colour in the PICTURE menu. ENGLISH Transmission [k][i][ ][Set ID][ ][Data][Cr] 12. Remote Control Lock Mode (Command: k m) ►To ► lock the front panel controls on the monitor and remote control. Transmission [k][m][ ][Set ID][ ][Data][Cr] Data 00 : Lock off Data Min : 00 to Max : 64 * Refer to Real data mapping 01 : Lock on Ack [m][ ][Set ID][ ][OK/NG][Data][x] Ack [i][ ][Set ID][ ][OK/NG][Data][x] 09.
15. Energy Saving (Command: j q) ►To ► reduce the power consumption of the TV. You can also adjust Energy Saving in PICTURE menu.
Channel data range Min : 00 Max : 270F (0 to 9999) ENGLISH Ack [a][ ][Set ID][ ][OK/NG][Data][x] 19. Programme Add/Skip (Command: m b) ►To ► set skip status for the current Programme. Data Structure MSB LSB 0 01 : Add 20. Key (Command: m c) ►To ► send IR remote key code. Transmission [m][c][ ][Set ID][ ][Data][Cr] 0 0 IR CODES 21.
* Real data mapping 00 : Step 0 Step 10 (Set ID 10) F: 10 : Step 15 (Set ID 15) Step 16 (Set ID 16) 64 : Step 100 6E : Step 110 73 : 74 : Step 115 Step 116 CF : Step 199 FE : FF : Step 254 Step 255 ENGLISH A: 9
