Owner's Manual

9. Pass the nozzle
lightly
over the floor.
Do not exert excessive
pressure
on the
floor
nozzle,
as this
may damage
the
floor,
particularly parquet
floors. Best
results will be obtained
by applying only
light pressure
to the nozzle. If the noz-
zle feels
sluggish,
raise the front end
slightly
to decrease the suction
power
as shown in the illustration.
10. To use the
attachment,
pull
out the
attachment at the rear.
11. When not in
use,
attach the holder of
pipe
to the
body
hole while the
body
is
in
upright position.
12. The dust indicator shows the amount of
dust that has collected in the dust
bag.
The
way
to check the dust indicator is
as follows.
Look at the dust indicator after
sepa-
rating
the nozzle 10cm from the floor.
If the
sign
is
red,
bag
is full. Clean the
cloth filter
bag.
If the
sign
isn't
red,
continue to use.
--8--
Crevice Tool
Dust Indicator