Owner's Manual

6
English
Getting
the vacuum cleaner
ready
for use
?
Connecting
nozzle,
extension
pipes
and hose handle one other:
Insert the narrow
part
into the wide
part. (Fig. 1)
*
If
you
have a
telescopic
extension
pipe, you
can
adjust
the
length
of the
pipe easily: (Reference
of
fig.3)
?
Connecting
hose to
body:
Insert the hose into the
body
of the vacuum
cleaner until a
clicking
sound is
heard.(Fig. 2)
?
Pull the main
plug
out of the vacuum cleaner and connect it to the
socket outlet: When
you
can see a red mark on the
power
cord,
you
must
stop pulling
out the cord
immediately. (Fig. 4)
?
Press the ON/OFF switch.
(Fig. 5)
Power indicator
will
extinguish slowly
when
press
switch button
in
off
position.(V-5060CT,
V-5166CT/CTV,
V-5000CT)
Adjusting
the suction
power
1)
For model
V-5060CT, V-5166CT/CTV,
V-5000CT
(Fig.
6)
Adjust
the suction
power
with the
power
control switch on the handle
grip.
?
Automatic
:
This mode is recommendable for normal situation. When
you
operate
the
appliance
in
this
mode,
the dust sensor
in
the
appliance
automatically
controls the suction
power.
If
you put
the nozzle on
dusty
area,
the
power
will
go up:
vice versa.
?
Booster
:
This mode is suitable for
removing
dirt which is
deeply
embedded
in
a
carpet
or on the
floor,
and also recommendable when the
hose,
the
pipes
or the nozzle is
clogged
with
any bulky
obstacles. The
Power
in
this mode is much
higher
than
MAX
mode
power.
Booster
operates
for 10 seconds and the mode returns to the
previous
one
automatically. (V-5060CT, V-5166CT/CTV)
OPERATING INSTRUCTIONS