V-CA504CEU V-CA504CT
Table of contents Information for Your How to Use cleaner the and How to use Operation How to Nozzles ........................................................................ elbow tube, Air turbine brush............................................................... Bag ........................................................................................... ........................................................................................................ in and Plug Adjusting ...
Information for Your Safety Please read all the following information, which contains important instructions for the safety, appliance. This appliance complies with the following EC Directives: -73/23/EEC, 93/68/EEC-Low Voltage Directive-89/336EEC -EMC Directive. Never allow children to use the appliance unsupervised. Do not use the appliance If the power cord is damaged or faulty.
How to Use Fit the large cleaning Spring Assembling Cleaner head onto the end of the tube. latch 2 Elbow (V-CA504CEU) Telescopic tube 1 (V-CA504CEU) 1 The 2 Push position telescopic nozzle outlet. 4 head tube into 2 Telescopic tube ? Press the ? Pull out the tube to the desired ? Release ? Push spring latch to release. length. spring latch to lock the tube inposition. telescopic tube into hose handle firmly.
Head Flexible Hose Button 3 Attachment Point 3 Connecting ? the flexible hose Push the end of the head into the attachment ? To remove point the flexible hose on on the vacuum cleaner. the flexible hose from the press on the button situated then pull the head out of the on vacuumcleaner, the head, vacuum cleaner.
How to Use Using the Accessory Nozzles Crevice tool Dusting Upholstery 2 1 1 Upholstery Nozzle Upholstery Nozzle is for vacuuming upholstery, mattresses, etc.The thread collectors help to pick the threads and fluff. up 2 Dusting brush nozzle 3 Brush Dusting Brush is for vacuuming picture frames, furniture frames, books and other irregular surfaces.
2 1 3 4 5 6 7 (V-CA504CEU) 4 5 Pedal Pedal 4 5 The 2 ? ? head The 2 position cleaning head equipped with a pedal which allows you to alter its position according to the ? position type of floor to be cleaned. Hard floor position (tiles, parquets floor) Press the pedal to lower brush. Carpet or rug position Press the pedal to lift the brush up.
How to use 6 elbow tube, Air turbine brush (V-CA504CEU) 7 Pile Adjustment Long Spring Pile latch (V-CA504CEU) Short Pile Spring 6 ? Air Turbine Brush Slide the Pile long pile Adjustment to the and to the left for short latch 7 right pile for Elbow tube Elbow tube is for table and bed ? cleaning easily. under the sofa, Connect the elbow tube to the flexible hose and, connect the the elbow tube.
How to use Changing dust bag Motor Filter Changing dust The dust needs bag changing when the cleaner is set to maximum power and the cleaner completely coloured red. Even if the dust bag does not appear to be full at this stage, it should be changed. It could be that a great deal of very fine dust has clogged up the pores of the dust bag. Turn off the appliance and unplug it. bag head is off the floor but the "bag full" indicator window is ? ? Push the button and open the cover.
Operation Cord reel button Suction control switch 2 1 Plug 4 3 1 How to Plug 2 ? Adjusting the Pull out the power cord to the desired length and plug into ? the socket. Push the suction control switch When you press the button that you desire, of the hose handle in the the direction of the ? you want. To stop it, position what push down the switch in the direction of OFF. Press the cord reel button to retract the power cord after 10 ? light comes on.
Cleaning the Exhaust Filter Filter cover ? The exhaust filter is ? To ? Pull out the exhaust filter. ? change Clean it with Do Not -Using use a washable reusable HEPA filter. the exhaust filter, removethe filter cold, running cover on the body by release hook. water. the brush the brush will cause Allow exhaust filter to ? The exhaust filter should be cleaned at least dry in permanent damage and allowdust ? a shaded location for a once a dry or to bypass the filter.
What to Do if Your Vacuum Cleaner Does Not Work: Check that the vacuum is plugged in correctly and that the electrical socket is working. What to Do When Suction Performance Decreases: 12 ? Turn off the ? Check the vacuum cleaner and unplug it. telescopic tube, flexible hose and cleaning tool that the dust bag is not full. Empty if necessary. ? Check ? Check that the exhaust filter is not blocked. Clean the exhaust for blockages or obstructions. filter, if necessary.
Note 13
Note 14
P/No.
