V-C7066NTU/HE/HEU/NTV/HTV V-C7062NTU/HE/HEU/NTV/HTV V-C7056NTU/HE/HEU/NTV/HTV V-C7051NTU/HE/HEU/NTV/HTV V-C7041NTU/HE/HEU/NTV/HTV BZ03
Table of contents Information for your How to use safety ............................................................................... ....................................................................................................... Assembling cleaner How to elbow tube, turbo brush use aOOOI¸AO'‡IEA Using the ...................................................................... ?‡ IE I‡fl head and the dust chamber Operation How to O˚IAOOO‡ cleaning Emptying Adjusting ......
Information for your safety Please read all the following information, which contains important instructions for the safety, the use and the maintenance of the appliance. appliance complies with the following EC Directives: -73/23/EEC, 93/68/EEC-Low Voltage Directive-89/336EEC -EMC Directive. Never allow children to use the appliance unsupervised. Do not use the appliance If the mains lead is damaged or faulty.
Fit the large cleaning head onto the end of the tube. 2 1-2 1 Nozzle outlet 1 The 2 Push position telescopic tube nozzle outlet. 4 head into (V-C7066NTU/HEU (V-C7066NTU/NTV (V-C7066HE/HEU/HTV V-C7062NTU/HEU V-C7062NTU/NTV V-C7062HE/HEU/HTV V-C7056NTU/HEU V-C7056NTU/NTV V-C7056HE/HEU/HTV V-C7051NTU/HEU V-C7051NTU/NTV V-C7051HE/HEU/HTV V-C7041NTU/HEU) V-C7041NTU/NTV) V-C7041HE/HEU/HTV) 1-2 Powerful Turbine Brush Push telescopic nozzle outlet.
How to use elbow tube, turbine brush aOOOI¸AO'‡IEA 1 O˚IAOOO‡ (a‡'EOEU OU (Depending on models) IO‰AIE) 2 Cleaning powerful Turbine brush e?EOUI‡ IO˘I‡fl iU ・O˘AUI‡ Top CE‰ O'A iU Spring latch 2 Open eUI OEUA e UEEII‡fl A‡˘AII‡ (V-C7066HE/HEU 1 V-C7062HE/HEU V-C7056HE/HEU V-C7051HE/HEU V-C7041HE/HEU) Open eUI OEUA Bottom CE‰ OIEAU Spring latch e UEEII‡fl A‡˘AII‡ 1 How to 2 use aOOOI¸AO'‡IEA Easy &Powerful celaning through adjusting the air-control lever.
How to Open use Using the cleaning the accessory Fit the cleaning cover and pull head and Accessory Nozzles out accessory you want. head onto the end of the tube. 2 1 3 1 Upholstery Nozzle 2 Dusting brush & Crevice Tool Upholstery Nozzle is for vacuuming upholstery, frames, furniture outlines, books and other mattresses, etc. uneven The thread collectors Crevice Tool is for help to pick up the threads and fluff.
1 2 3 4 4-1 5 4-2 6 Spring Head 4 4-1 4-2 latch 6 5 Pedal 4 4-1 4-2 ? Large cleaning head(depending on model) position heads equipped pedal which allows you to position according to the type its a Hard floor ? 8 Page 12~14. 6 Adjusting the telescopic tube length Telescopic tube ? Pull out tube to required length. of ? Release latch. position(tiles, parquets floor) pedal to lower brush. Carpet or rug position Press the pedal to lift the brush up.
How to use Emptying the dust chamber Button Dust chamber The dust chamber needs emptying MAX, which is marked the dust chamber. on when the dust reaches ? Turn off the ? Your appliance and unplug it. appliance is equipped with both the dust chamber and the motor filter. Press the button of the ? cover and pull the dust chamber forward. Remove the dust chamber cap and empty the dust chamber.
Operation Hose handle Switch button (V-C7066NTU/NTV, V-C7062NTU/NTV,V-C7056NTU/NTV, V-C7051NTU/NTV, V-C7041NTU/NTV Only) (V-C7066NTU/NTV, V-C7062NTU/NTV,V-C7056NTU/NTV, V-C7051NTU/NTV,V-C7041NTU/NTV iOI ¸IO ) 2 1 3 Regulator Cord reel button FLOOR CARPET SOFA CURTAIN OFF 1 Adjusting the power level(depending on model) ? ? The flexible hose handle has a manual air flow regulator which allows you to reduce the suction level briefly.
How to use Cleaning the motor filter/Air cleaner The motor filter is situated under the tank cap and does not need WARNING! to be changed. light comes on, clean the motor filter with water and brush and then replace it in the vacuum cleaner. Press the button of cover and pull the dust chamber forward. Open the tank cap. Separate the motor filter by rotaing it counter-clockwise. Clean the motor filter with the brush under a running tap. ?Dryitinshadeforaday.
Cleaning Cleaning the dust chamber the exhaust filters Plate dust chamber Filter cover 2 1 Wheel 3 Tank cap 1 Open the tank cap. 2 Remove two plates from ? the dust chamber. ? The exhaust filter is so you can use To change cover on Gently under 12 parts with soft material. parts cold running tap. rinse both a washable HEPA filter. the filter cover the filter, counter-clockwise. Pull out the exhaust filter. ? Clean it with water. use a brush.
User's guide for sani punch nozzle vacuum (Optional) Features How to This nozzle Follow the directions below for proper picks up even dust inside through beating. The bottom part can be separated to be cleaned. Since the bottom does not stick to the surface, vacuuming is easy. use Assembly Connect the nozzle to the use. telescopic tube. Use Set the suction power control switch to MAX POWER before vacuuming.
This Sani Punch nozzle is for effective cleaning of beds and blankets to remove mites and dust. Sani Punch Effective cleaning Bed & blanket Bulky When using on Lay out the blanket and vacuum it on the bed the bed & heavy When blanket Light using It is easier to clean by pushing lay on a the floor light blanket or sheet the nozzle in the direction of the To increase 14 on blanket & sheet arrow.
User's For guide for sani punch vacuum nozzle Cleaning Vacuum Nozzle for Bedding(Optional) simple cleaning of the vacuum and attach the crevice tool to Top nozzle, detach the Sani Punch nozzle from the telescopic tube vacuum dust. Bottom Since the vibrator inside is composed of precision parts, never disassemble the body. foreign objects clog the air sunction part on top of the vacuum nozzle. Since removal of the punch bar may cause performance problems, do not warp or remove it.
Follow the instruction below for (Do not soak the entire body through washing. of the vacuum nozzle in water, it may cause the vibrator to malfunction) Bottom 2 1 plate 3 Punch bar Bottom 4 plate 6 5 Punch bar 1 Press the button rear side of the nozzle to botto p on 2 the all the soiled Wipe of the vacuum separate the body vacuum with a parts Wash the removed bottom plate with water and dry it. cloth. ate 4 Straighten on the punch the lower section.
What to do if your Check that the appliance is appliance correctly plugged in and that the electrical socket is What to do when the suction the appliance and working. performance reduces? it. ? Stop ? Check that the ? Check that the dust chamber is not full. ? Check that the ? Check that the exhaust filter is not blocked. unplug does not work tubes, flexible hose and cleaning tool. light is not on Empty if necessary. because of motor filter's blockage. Clean the filter.
P/No.
