V-C7770CT V-C7770CE
Table of contents Information for Your Safety......................................................................................3 How to Use.................................................................................................................4 Assembling Using the Emptying the Cleaner ........................................................................................................4 cleaning head and Accessories...................................................................
Information for Your Safety Please read all the following information, which contains important instructions for the safety, appliance. This appliance complies with the following EC Directives: -73/23/EEC, 93/68/EEC-Low Voltage Directive-89/336EEC -EMC Directive. Never allow children to use the appliance unsupervised. Do not use the appliance If the power cable is damaged or faulty.
Assembling the Cleaner Fit the large cleaning Spring head onto the end of the tube. 2 latch 1 Nozzle outlet Large cleaning head Push the head onto the telescopic Telescopic ? tube. Press the tube spring latch to release. ? Pull out the tube to the desired length. ? Release spring latch to lock position. telescopic tube into hose the tube in ? Push handle until catch clicks.
Head Flexible Hose Attachment Point Button 3 Connecting the hole to the cleaner Push the end of the head into the attachment To remove pull on on the flexible hose the vacuum the flexible hose from the cleaner, press then point on the button situated the head out of the vacuum cleaner. vacuum on the head, cleaner.
the cleaning head and Accessories Tear the vinyl bag and Using pull out accessories. Attach the accessory holder into the side hole of And then, Fit the Dusting body. Brush & Crevice Tool and Upholstery Nozzle onto the accessory holder. Fit the accessory onto the end of the tube. Upholstery nozzle Dusting brush & Crevice tool Brush 2 1 Upholstery Nozzle The upholstery Nozzle vacuuming upholstery, is for 3 Dusting The dusting Brush is for mattresses, etc. hard surfaces.
1 2 3 4 5 6 7 CE (Refer to Page 12~14) (Refer to Page 10) 6 4 Pedal Head Spring latch (V-C7770CE) Spring latch Large cleaning head Elbow tube (V-C7770CE) ? The 2 position cleaning head is equipped with a pedal which allows you to alter the brush position according to the type of floor to be Elbow tube is for ? ? under the Connect the elbow tube to the flexible hose cleaned. ? cleaning sofa, table and bed easily. and, connect the Hard floor telescopic tube to the elbow tube.
How to Use Emptying the dust chamber Button Dust chamber cap Button Dust chamber The dust chamber needs emptying reaches the MAX indicator the dust chamber. on when dust ? Turn off the ? Press the button of the ? cleaner and cover and unplug it. pull the dust chamber forward. Remove the dust chamber cap and empty the dust chamber. To reinstall the dust chamber, replace the dust chamber cap and push 8 vacuum the dust chamber into the tank mount as far as it will go.
Operation Key pad Cable reel button 2 1 3 POWER CONTROL STOP AUTO MIN MAX BOOSTER Hose handle Min Auto Max Booster Operation ? Adjusting Pull out the power cable to the length and put plug into the ? socket. ? When you press the button that you desire, the light comes on. ? If you press the Auto button, the power is automatically adjusted by the amount of dust. desired ? the Suction power Press the cable reel button to retract the power cable after use.
Cleaning the Motor Filter/Air cleaner Button The permanent cap. When the filter Light motor filter is situated under the dust chamber light comes on, Motor Filter ? Press the button of ? Open ? Remove the motor filter ? Clean the motor filter with the brush under cold cover and required cleaning. pull the dust chamber forward. the dust chamber cap. ? Allow the motor filter to it counter-clockwise. 10 dry naturally, running the motor filter should be cleaned every 6 months.
Cleaning the Dust Chamber Cleaning the Exhaust Filters Dust chamber cap 3 1 Filter cover Plate Dust chamber 2 Open the dust chamber cap. Wash both parts with soft cloth. Gently rinse cold running both parts under ? The exhaust filter is ? To clean the exhaust filter, the filter cover on body by rotating the filter cover water. ? Clean it with ? use from ? a as water. this will damage. the filter.
User's Guide for the Ultra Punch Vacuum head Features How to This nozzle Assembly picks up even dust inside through beating. The bottom part can be separated to be cleaned. Since the bottom does not stick to the surface, vacuuming is easy. use Connect the head to the telescopic tube. Use Set the suction power control switch to MAX POWER before vacuuming.
This Ultra Punch nozzle is for effective Effective cleaning of beds and blankets to remove mites and dust. cleaning Beds and blankets Heavy blankets Light When using on Lay out the blanket and vacuum it on the bed the bed When using on It is easier to clean by pushing a blankets and sheets the floor light blanket or sheet the head in the direction of the arrow. To increase lay on cleaning efficiency for light blankets, top of a bulky blanket and then clean.
User's Guide for the Ultra Punch Vacuum head For simple cleaning of the Ultra Cleaning Vacuum Nozzle for Bedding Punch, detach the Ultra Punch head from the telescopic tube and attach the crevice tool. Bottom Top Since the mechanism is composed of precision parts, never disassemble the body. foreign objects clog the air suction part on top of the vacuum nozzle.
Follow the instruction below for (Do not soak the entire body through washing. of the vacuum head in water, it may damage the mechanism) Bottom 2 1 plate 3 Bottom plate Punch bar 4 6 5 Punch bar Press the button rear side of the nozzle to bottom on the Wipe of the vacuum remove the all the soiled vacuum body with a Wash the removed bottom parts nozzle plate with water and dry it. cloth. plate. Straighten on the punch the lower section.
What to Do if Your Vacuum Cleaner Does Not Work Check that the vacuum cleaner is plugged in correctly and that the electrical socket is working. What to Do When Suction Performance Decreases ? Turn off the ? Check the ? Check that the dust chamber is not full. ? Check that the motor filter ? Check that the exhaust filter is not blocked. Clean the exhaust vacuum cleaner and telecsopic tube, it. unplug flexible hose and light is not cleaning tool for blockages Empty if necessary.
Notes 17
Notes 18
P/No.