Model Language Page Material Date Part No. ＣＫ３ ＥＮＧＬＩＳＨ １６ ＰＡＧＥ Weight １００Ｇ ２００６．０９．０４ ＭＦＬ３２９３０８０１ Color(cover/body) Size(W*H) Designer Description ２／２ １９０＊２６０ Ｗａｎｇｚｈｅｎｚｈｏｎｇ ＭＡＮＵＡＬ，ＯＷＮＥＲＳ Chage Record No. 1 2 3 4 5 6 7 8 9 Change content drawing realization drawing realization Date Designer Confirm ECO No. ACTT702608 2007.04.14 SONG1 CUIYT ACTT703604 2007.06.
V-CD201H* V-CD201N* V-CD281H* V-CD281N* V-CD261H* V-CD261N* V-CD241H* V-CD241N* V-CD211H* V-CD211N*
Table of contents Safety Information.....................................................................................................3 How to Use.................................................................................................................4 Assembling cleaner ...............................................................................................................4 Using the cleaning head and Accessory Nozzles..................................................................
Safety Information Please read the following information, which contains important instructions for the use and maintenance of the appliance. This appliance complies with the following EC Directives: -73/23/EEC, 93/68/EEC-Low Voltage Directive-89/336EEC -EMC Directive. The appliance is not intended for use by young children or infirm persons without supervision. Young Children should be supervised to ensure that they do not play with appliance.
Assembling Cleaner 2 Fit the large cleaning head into the end of the tube. NT** NE** Spring latch Elbow Telescopic tube HT** HE** 1 1 The 2 position head (depending on model) Push telescoopic tube into nozzle outlet. 4 2 Telescopic tube (depending on model) • Press the spring latch to release. • Pull out the tube to the desired length. • Release spring latch to lock the tube in position. • Push telescopic tube into hose handle firmly.
Head Flexible Hose HT** HE** NT** NE** Attachment Point Button 3 Connecting the flexible hose • Push the end of the head on the flexible hose into the attachment point on the vacuum cleaner. • To remove the flexible hose from the vacuum cleaner, press on the button situated on the head, then pull the head out of the vacuum cleaner. CAUTION • Suction power may be weakened when insignificant dusts are sucked. In this case, clean the filter.
User's Guide for Sani Punch Vacuum Nozzle (Option) Features How to use This nozzle picks up even dust inside through beating. Follow the directions below for proper use. The bottom part can be separated to be cleaned. Since the bottom does not stick to the surface, vacuuming is easy. Assembly Connect the nozzle to the telescopic tube. Use Set the suction power control switch to MAX POWER before vacuuming. Depending on the type of bedding, handling may be awkward or it may cause a lot of noise.
This Sani Punch nozzle is for effective cleaning of beds and blankets to remove mites and dust. Effective cleaning Bed & blanket Bulky & heavy blanket Light blanket & sheet When using on the bed When using on the floor Lay out the blanket and vacuum it on the bed. It is easier to clean a light blanket or sheet by pushing the nozzle in the direction of the arrow. To increase cleaning efficiency for light blankets, lay on top of a bulky blanket and then clean.
User's Guide for Sani Punch Vacuum Nozzle Cleaning Vacuum Nozzle for Bedding (Option) For simple cleaning of the vacuum nozzle, detach the Sani Punch nozzle from the telescopic tube and attach the crevice tool to vacuum dust. Top Bottom Since the vibrator inside is composed of precision parts, never disassemble the body. Be careful not to let foreign objects clog the air suction part on top of the vacuum nozzle. Since removal of the punch bar may cause performance problems, do not warp or remove it.
Follow the instruction below for through washing. (Do not soak the entire body of the vacuum nozzle in water, it may cause the vibrator to malfunction) 1 2 4 Press the button on the rear side of the vacuum nozzle to separate the bottom plate. 3 5 Wipe all the soiled parts of the vacuum nozzle body with a cloth. Straighten the punch bar on the lower section. 6 Wash the removed bottom plate with water and dry it. Insert the attachment projections on bottom plate to the vacuum nozzle grooves.
Troubleshooting What to Do If Your Vacuum Cleaner Does Not Work • Check that the vacuum cleaner is correctly plugged in correctly and that the electrical socket is working. What to Do When Suction Performance Decreases • Turn off the vacuum cleaner and unplug it. • Check the telecsopic tube, flexible hose and cleaning tool for blockages or obstructions. • Check that the dust chamber is not full. Empty if necessary. • Check that the motor filter light is not on. Clean the motor filter, if necessary.
Notes 17
Notes 18
P/No.
