Model V-KC902RT*** Language 영어 Part No. MFL37414321 Page 16 인쇄도수(외/내) 2/2 모조지 100g 크 190*260 2007.11.
OWNER'S MANUAL V-KC902RT*** New Type Cyclone Vacuum Cleaner This information contains important instructions for the safe use and maintenance of the vacuum cleaner. Especially, please read all of the information on page 4,5 for your safety. Please keep this manual in an easily accessible place and refer to it anytime.
2
Table of contents Important safety instructions ..............................................................................4~5 How to use .................................................................................................................6 Assembling vacuum cleaner................................................................................................................6~7 Operating vacuum cleaner.......................................................................................
IMPORTANT SAFETY INSTRUCTIONS Read and follow all instructions before using your vacuum cleaner to prevent the risk of fire,electric shock, personal injury,or damage. This guide do not cover all possible conditions that may occur.Always contact your service agent or manufacturer about problems that you do not understand. This appliance complies with the following EC Directives :-73/23/EEC,93/68/EECLow Voltage Directive–89/336EEC –EMC Directive. This is the safety alert symbol.
IMPORTANT SAFETY INSTRUCTIONS CAUTION • Do not put any objects into openings. Failure to do so could result in product damage. • Do not use with any opening blocked: keep free of dust, lint, hair, and anything that may reduce air flow. Failure to do so could result in product damage. • Do not use vacuum cleaner without dust tank and/or filters in place. Failure to do so could result in product damage. • Always clean the dust bin after vacuuming carpet cleaners or fresheners, powders and fine dust.
How to use Assembling vacuum cleaner Hose Handle 2 Spring latch Telescopic pipe 1 6 All floor nozzle (depend on model) Telescopic pipe Push the nozzle into the telescopic pipe. • Push telescopic pipe firmly into hose handle. • Grasp the spring latch to expand. • Pull out the pipe to desired length.
Click! Fitting pipe Flexible Hose Button 3 Attachment Point Connecting the hose to the vacuum cleaner Push the fitting pipe on the flexible hose into the attachment point on the vacuum cleaner. To remove the flexible hose from the vacuum cleaner, press the button situated on the fitting pipe, then pull the fitting pipe out of the vacuum cleaner.
How to use Operating vacuum cleaner 1 2 3 4 Plug Cord reel button Control knob Grip Handle MIN MAX OFF How to operate Alarm sound Park mode Storage • Pull out the power cord to the desired length and plug into the socket. • Place the control knob of rear cover to the required position. • To turn off, place control knob to OFF position. • The flexible hose handle has a manual air flow regulator which allows you to briefly reduce the suction level.
How to use Using All Floor nozzle 1 Carpet Pedal • Cleaning All Floor nozzle Floor All Floor nozzle • The 2 position nozzle This is equipped with a pedal which allows you to alter its position according to the type of floor to be cleaned. • Carpet or rug position Press the pedal ( ), then brush will rotate • Hard floor position Press the pedal ( ), then brush will stop rotating • Open the cover by pulling the hook. • Clean the hole and brush of the nozzle.
How to use Using accessory nozzles Upholstery nozzle 2 Dusting brush Crevice tool 3 4 Upholstery nozzle Dusting brush Crevice tool Upholstery nozzle is for vacuuming upholstery, mattresses etc. Dusting brush is for vacuuming picture frames, furniture frames, books and other irregular surfaces. Crevice tool is for vacuuming in those normally hard-to-reach places such as reaching cobwebs or between the cushions of a sofa.
How to use Emptying dust tank Tank separation lever Pull out Tank handle Dust tank cap Plate opening lever The dust tank needs emptying when the alarm is sound. • Turn off the vacuum cleaner and unplug it. • Grasp the handle of the tank and then press the tank separation lever. • Pull out the dust tank. • Empty the tank and then assemble the dust tank as below Assembling dust tank First, place the bottom of dust tank on the vacuum cleaner and tilt.
How to use Cleaning dust tank Dust tank cap Plate opening lever le er Tank separation lever Pull out Tank handle • Press tank separation lever and pull out dust tank. • Raise dust tank cap • Dry fully in shade so that moisture is entirely removed. 12 NOTICE If suction power decreases after cleaning dust tank, clean air filter and motor safety filter.
How to use Cleaning air filter and motor safety filter Pre-filter cover lever Motor safety filter Filter cap Air filter Pre-filter assembly Pre-filter cover Two "UP" marks must meet If suction power is decreased after cleaning dust tank, clean air filter and motor safety filter. Air filter and motor safety filter are located at the back of vacuum cleaner in the above figure.
How to use Cleaning exhaust filter Exhaust filter cover White side up • The exhaust filter is a washable and reusable HEPA filter. • To clean the exhaust filter, remove the exhaust filter cover on the body by rotating it counterclockwise. • Separate the exhaust filter. • Wash the filter cleanly in flowing water. • Remove moisture. • When filter is washed, make sure not to wash green side of filter • Dry fully in shade so that moisture is entirely removed.
What to do if your vacuum cleaner does not work Check that the vacuum cleaner is plugged in correctly and that the electrical socket is working. What to do when suction performance decreases • Turn off the vacuum cleaner and unplug it. • Check the telescopic pipe, flexible hose and cleaning tool for blockages or obstructions. • Check that the dust tank is not full. Empty if necessary. • Check that the exhaust filter is not clogged. Clean the exhaust filter if necessary.
P/No.
