Model V-WP20SPNT ／ V-WP18SPNT / V-WP208NT / V-WP188NT Language Page English Material Date Part No. 20 Weight 100g 2013.03.26 MFL67787501 Color(cover/body) 1/1 150 X 220 (mm) Size(W*H) Zhang Lu Designer Ownner's Manual Description Chage Record No. 1 2 3 4 5 6 7 8 9 Change Content ECO No.
V-WP20SPNT V-WP18SPNT V-WP208NT V-WP188NT MFL67787503
Basic Parts 8 7 Accessory These specifications are subject to change according to the agent/buyer's request.
Power Switch 12 13 11 Dust-full indicator 14 15 17 16 18 19 20 21 -3-
IMPORTANT SAFETY INSTRUCTIONS Read and follow all instructions before using your vacuum cleaner to prevent the risk of fire,electric shock, personal injury,or damage when using the vacuum cleaner.This guide do not cover all possible conditions that may occur.Always contact your service agent or manufacturer about problems that you do not understand. This appliance complies with the following ECDirectives:-2006/95/EC Low Voltage Directive-2004/108/EC EMC Directive. This is the safety alert symbol.
WARNING supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. • Disconnect electrical supply before servicing or cleaning the unit or when cleaner is not in use. • Do not use vacuum cleaner if it has been under water.
IMPORTANT SAFETY INSTRUCTIONS WARNING • Keep children away and beware of obstructions when rewinding the cord to prevent personal injury. The cord moves rapidly when rewinding. (Depending on model) • The hose contains electrical wires. Do not use it if it is damaged, cut or punctured. Failure to do so could result in death,or electrical shock. (Depending on model) CAUTION • Do not put any objects into openings. Failure to do so could result in product damage. • Use accessory nozzles in sofa mode.
IMPORTANT SAFETY INSTRUCTIONS CAUTION Thermal protector : This vacuum cleaner has a special thermostat that protects the vacuum cleaner in case of motor overheating. If the vacuum cleaner suddenly shuts off, turn off the switch and unplug the vacuum cleaner. Check the vacuum cleaner for possible source of overheating such as a full dust tank, a blocked hose or clogged filter. If these conditions are found, fix them and wait at least 30 minutes before attempting to use the vacuum cleaner.
Adjusting the suction level Connecting flexible hose Put hose joint (1) into the socket (2) on unit When you want to take hose out , press button and pull hose joint (3) out. Assembling pipe and nozzle Insert telescopic pipe (4) into handgrip (5) reelingly. Insert floor nozzle (6) into telescopic pipe (4) Telescopic pipe Grasp the spring latch (6) to expand.
Remove the hose, and release the clamp (16) by pulling the lower side of it on each side and take off the upper case (17) ． Take the upper case (17) and shake the cloth filter (18) for about 20 times to remove the clogging dust from the filter. When fluff remains excessively on the filter, remove it by a brush. CAUTION Do not shake it up and down. Take off the filter and dispose of the dust in the tank (19) . Change the filter to the tank, and set the upper case on the tank.
(20) -9-
(11) (8) (15) (9) (10) -8-
-7-
-6-
-5-
-4-
12 13 11 14 15 17 16 18 19 20 21 -3-
5 31 4 6 2 7 9 10 -2-
V-WP20SPNT V-WP18SPNT V-WP208NT V-WP188NT MFL67787503
