Owner's Manual

Preparation
Before
Operation-VCR part
Tuning
in
a video channel on
your
TV
Video channel
(RF output channel)
is the channel on
which
your
TV receives
picture
and sound
signals
from
the DVD+VCR
through
the RF cable.
If
you
have used a SCART lead
you
will not have to
tune
your
TV,
simply
select the AV channel. The AV
channel is
already pre-tuned
for
optimum
video
play-
back on
your
TV.
Perform the
following steps only
if interference
appears
in the TV
picture
after
you
have moved to a different
area or a new station has started
broadcasting
in
your
area,
or if
you change
the connection from RF connec-
tion to AV
connection,
or vise versa.
1. Turn on DVD+VCR and TV.
2. Set the vacant
position
36 on
your
TV.
3. Press POWER on the remote control to enter the
stand
by
mode
(the
clock indicator will be
dimmed).
4. Press and hold PROG.
(
v
or
V
)
on the DVD+VCR
for more than 4 seconds.
RF 36 will
appear
in the
display.
The
following picture
will be
displayed
on the TV
screen.
If the
picture
is
snowy,
move to
step
5. If the
picture
is
clean,
press
POWER on the DVD+VCR to finish.
5. Press PROG.
(v
or
V)
on the DVD+VCR to set the
video channel to a vacant
position
between 22 and
68 which is not
occupied by any
local station in
your
area.
Note:
The RF channel will not
change
until
step
6 has
been executed.
6. Press POWER to store the new RF video channel
into the DVD+VCR
memory.
Now tune
your
TV set to the new DVD+VCR RF
channel.
Note
If the TV
picture
was clear in
step
4,
do not retune
your
TV.
Using
your
VCR for the
very
first
time
Following picture
will
display
on the TV screen when
you
have
just
connected
your
video recorder for the
very
first time.
To make
tuning
TV
stations,
please
follow
stages
3 to 4
as shown "ACMS"
(see p.13).
RF CHANNEL 36
Pr-12
ACMS
ACMS