V1940MH_NA1ULL_ENG DVD Player & Video Cassette Recorder OWNER'S MANUAL MODEL : V194H Before connecting, operating or adjusting product, please read this owner's manual carefully and completely.
FCC WARNING: This CAUTION equipment may generate or use energy. Changes or modifications to this cause harmful interference unless the radio frequency equipment may RISK OF ELECTRIC SHOCK DO NOT OPEN are manual. The user equipment CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER modifications if expressly approved in the instruction could lose the authority to operate this unauthorized change or modification is an made.
IMPORTANT SAFETY INSTRUCTIONS CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER'S MANUAL. AND THOSE MARKED ON THE PRODUCT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE. This designed and manufactured to assure personal safety. Improper use can result in electric shock or safeguards incorporated in this product will protect you if you observe the following procedures for installation, use, and servicing. This product does not contain any parts that can be repaired by the user.
Contents Introduction....................5-10 Operations-VCR..............21-27 MoistureCondensation..................5 VCRTapePlayback.................21-22 SymbolUsedinthisManual.............5 BasicInstructions.....................21 AbouttheSymbolDisplay............5 AutoTracking........................21 ManualTracking......................21 NotesonDiscs........................5 Search.............................21 AbouttheRemoteControl...............
Introduction To ensure proper use of this product, please read this owner's manual carefully and retain for future refer- Storing ence. expose the disc to direct sunlight or sources of heat and never leave it in a parked car exposed to direct This manual information provides on the operation After Discs playing, and maintenance of your DVD+VCR. Should the unit require service, contact an authorized service loca- sunlight. tion.
Types of ypes of Discs Playable DVD It is forbidden (8cm/12cmdisc) broadcast via In addition, this unit plays Memory Card, DVD-R, DVD+R, DVD-RW, DVD+RW, SVCD, and CD-R / CD-RW that contains audio titles, MP3, WMA, and/or JPEG, DivX files. of with Video product feature that is playing DVD-RW discs recorded Recording format. a Notes: ? Depending on the conditions of the recording equipment or the CD-R/RW (or DVD±R/RW) disc itself, some CD-R/RW (or DVD±R/RW) discs cannot be played on the unit.
Card Card useable useable on on Flash Card (CF) Compact ? ? Micro Drive ? Secure ? Multi Media Card (MD), 1. ST1 MD Card Digital Card Using Using Memory Card this unit unit (SD), (MMC), 2. mode. MMC The Plus, RS MMC, ? a Digital picture Memory Stick Card Ms (MS), the Front panel Card slot choice menu Memory the TV eXtreme memory card. Press MEMORY Mini SD MMC Mobile ? Insert on while in DVD appears Introducin on screen.
Front Panel ab cde DVD VCR REC PM TV fgh a 1 i jkl m n o p POWER b c Disc Tray (DVD deck) Insert a closes the disc or Cassette Insert e disc here. a TV Lights the is not displayed.) when TV mode is active. (Playback, Pause, etc). g Accesses the CH To k l up menu for memory card. down through memorized channels. RESOLUTION You - change HDMI mode or - can : the resolution You can depending on switch among the your TV.
Remote Control Control POWER Switches DVD+VCR ON and OFF. DVD Select the DVD+VCR function mode to DVD. VCR Select the DVD+VCR function mode to VCR. OPEN/CLOSE Opens and closes the disc tray. EJECT Ejects the tape in the VCR deck. Selects numbered options by the the TV tuner. INPUT Selects the VCR deck's (Tuner, LINE 1, or Display. CLK/CNT Switches between the counter and tape ing modes on clock, tape remain- the display. FGDE Selects menu options.
Rear Panel Caution Do not touch the inner permanent damage of the pins jacks on the rear panel. Electrostatic discharge may cause to the unit. ab c d e f ghi a j g ANT.IN RF. OUT Connect the VHF/UHF/CATV antenna to this terminal. b VCR IN LINE 1 Connect to h (VIDEO/AUDIO (Left/Right)) DVD/VCR OUT d (Y Pb Connect to i (VIDEO/AUDIO (Left/Right)) TV with video and audio a a S-VIDEO OUT inputs. Connect to j Input TV with Y Pb Pr Connect to inputs.
Connecting Connecting or or a an To view Antenna Cable Cable TV 1 2 Antenna: the antenna cable. If it is coaxial cable connect it a round 75 ohm to the directly jack marked on your DVD+VCR. If your antenna cable is flat connect it to a 300-ohm to 75-ohm antenna adap- (not supplied) and slip the adaptor jack. Don't attempt to screw it ANT.IN over the Set the DVD+VCR channel selector to the cable Select a channel the cable converter.
Connect the COMPONENT/PROGRESSIVE SCAN Rear of TV ANTENNA VIDEO INPUT INPUT VIDEO OUT AUDIO INPUT sponding Pr cable R V jacks on the DVD+VCR to the correjacks on the TV using an optional Y Pb (C). in Notes: A1 ? The scan Rear of DVD+VCR ? 480p and 720p resolutions applied resolutions. Progressive does not work with the scan video connections S-VIDEO OUT (yellow jack). Resolution The resolution Progressive are VIDEO OUT analog jack and setting setting support only DVD playback.
HDMI Connection Connection HDMI If you have a HDMI TV or monitor, you to this DVD+VCR using a HDMI cable. 1. Set the TV's Owner's 2. source to HDMI (refer TV HDMI to TV's manual). H Connect the HDMI OUT HDMI compatible connect it can jack on (H). a jack on the unit compatible TV or HDMI to the monitor 3. Press RESOLUTION repeatedly to select the desired resolution.
Connection Connection to You an Amplifier Rear of DVD+VCR playback using OPTICAL (O), (X) (A2) connections. The tuner and VCR will still be heard through the RF.OUT (R) or DVD/VCR AUDIO OUT (A1) jack. (See page 12.
Initial Settings Settings - VCR VCR ? The Auto Clock Set feature is set to ON at the fac- tory. In the ON setting, the DVD+VCR looks for By using the VCR Setup menu, you can make various adjustments to items such as clock setting, and timer recordings. Your DVD+VCR allows remote control AUTO CLOCK SET adjustment channel Coordinated Universal Time. -Useb/BtochooseONorOFF. ? DAYLIGHT SAVINGS You General Press VCR 2.
TUNING SETUP This DVD+VCR is sized tuner equipped with a frequency synthecapable of receiving up to 181 channels. These include VHF channels 2-13, UHF channels 14-69 and CATV channels 1-125. Auto Channel Programming FUNCTION OSD The on-screen display can be turned on or off. AUDIO MODE The DVD+VCR has two separate audio playback sys- tems, the high quality VHS Hi-Fi system and standard 1. Choose the SOURCE SELECT option, then use b / B to select TUNER.
Displaying on-screen on-screen - Disc Information DVD Initial Settings Settings DVD - By using the DVD Setup menu, you can make variadjustments to items such as picture and sound. You can also set a language for the subtitles and the Setup menu, among other things. For details on each Setup menu item, see pages 18 to 20. ous You can loaded 1. display various information about the disc on-screen. Press DISPLAY to show various playback infor- mation.
LANGUAGE AUDIO Each DVD disc has a Set this unit's AUDIO audio Menu Language Select a language for the VCR and DVD's and information menu setup Dolby Digital Select the language you prefer for the audio (disc audio), subtitles, and the disc menu. Refers to the disc recorded.
LOCK Password (Parental Control) You can (Security Code) enter or change password. 1. Select "Password" on the LOCK menu then press B. 2. Follow shown previous page (Rating). password, select the "Change", press ENTER/OK and input the new 4-digit code then press ENTER/OK. Input it again to verify. To step change 2 as the 3. Press SETUP/MENU to exit the Rating Some movies contain for children to view.
DivX(R) VOD OTHERS We provide you the DivX VOD (Video On Demand) registration code that allows you to rent and purchase videos using the DivX VOD service. For more information, visit www.divx.com/vod. 1. Select 2. Press ENTER/OK while "Select" is selected and the "DivX(R) VOD" option then press B. registration code will appear. registration code to purchase Use the videos from DivX download the video onto Playback Control (PBC) to On On: Video CDs with PBC or Off.
Operations This describes how to chapter - VCR operate the VCR and Manual Tracking DVD. To VCR VCR Tape Playback manually adjust buttons Vertical 2. Tune the TV to the DVD+VCR 3 (CH 4) or if more a the CH/TRK CH (v/V) jitter requires a very fine on (v/V) the front adjustment. Tracking automatically reset to is tape ejected or the power cord the TV. or use or is ? Basic Instructions on tracking Notes: ? Turn the the remote control panel during playback.
Slow Motion 1. While in still mode, press FORWARD (M). The tape is played at a speed 1/19 times slower than the normal 2. speed. Use CH/TRK necessary to 3. (v/V) on the Remote adjust the tracking. To return to the normal PLAY speed, Control if option to STEREO (L) is heard from left speaker and the right channel sound (R) heard from the right speaker. 2. press (N).
VCR VCR Tape To record Recording Basic Instructions 1. 1. Turn 2. Tune the TV to the DVD+VCR 2. (CH 3 or 4) or if a output channel direct VIDEO/AUDIO source Insert 4. Select the desired channel 5. a video cassette with the safety using or Set the desired pressing tab intact. CH/TRK (v/V). Timer LINE2 using recording speed (SP or BROADCAST 8. (STEREO TYPE option to Press REC/ITR and (z) Things for is 9. loaded, the 1. a 2. cassette ejected.
CHANNEL: Select TV a channel, LINE1 Checking or or Erasing the Timer Program LINE2. If you have CABLE TV and use a cable box (converter) you must set the channel to match the cable box output channel (usually CH channels Change on the DVD+VCR. If you 3 or can be checked whenever the on. 4). the cable box instead of with 1. cable converter, you recordings only on the con- 2. Press MENU and the MAIN menu appears. use a program multiple verter box output channel.
Instant Timer With this feature you can record for without using the program timer. 1. 2. Turn Be a preset length the TV is tuned to the DVD+VCR sure channel (CH 3 or If 4). a output direct VIDEO/AUDIO connection is made between the DVD+VCR and the set the TV's TV, source 3. Insert 4. Select the desired channel or a selector to VIDEO. video cassette with the the number buttons safety using (0-9).
You can Each press of the ENTER/OK from DVD to VCR Copying in the copy the contents of a DVD to a VHS tape. 1. Insert the disc you wish to copy into the DVD deck and close the disc tray. 2. Insert 3. Find the following STOP to start place dubbing the TV screen CH4 SP STEREO APR 30,SAT blank VHS video a changes sequence. 2:15PM tape into the VCR deck. 2:15 PM the DVD from which you want using the PLAY, FF, REW and on 0:35:40 REM 1:58 PAUSE functions.
S-VHS Quasi Additional VCR VCR Information ? manual recording, timer recording, Instant Recording, playback, or fast forward modes, the DVD+VCR automatically starts rewinding the tape at the end of the tape. The cassette stops at the beginning of the tape and is ejected. During ? Timer ? After you have finished using the DVD+VCR, rewind, eject, and remove the cassette. Place the cassette in its sleeve to protective protect it from dust.
Operations - DVD Playback Setup Setup Turn the TV Audio and select the video on System: input source connected to this unit. System on and select the input source connected Turn the Audio 1. Press OPEN/CLOSE 2. Load your chosen disc in the 3. Press OPEN/CLOSE (Z) (Z) to open the disc tray with the to close the to this unit. tray. playback side down. tray. READING appears on the display window, and playback starts If playback does not start, press N (PLAY).
Buttons Discs Operations ZOOM During playback or pause mode, press ZOOM to enlarge image (4 steps). You can move through the zoomed picture using bBvV the video buttons. Press CLEAR to exit. Note: Zoom may not work RANDOM During playback playback. or on some in DVDs. stop mode, press RANDOM for ran- dom TITLE If the current DVD title has on DISC MENU the screen.
Marker Search To enter You desired point the TV from up to nine memorized at the playback To enter points. on Marker a start can a on marker, press MARKER the disc. The Marker icon appears briefly. Repeat to enter up to nine screen markers. To Recall or 1. disc During search er 2. Clear a Marked Scene press SEARCH. The markon the screen. playback, menu appears Within 10 seconds, press b / B to select number that you want to recall or clear. Press ENTER/OK and 3.
Playing Audio CD CD an Programmed Playback or or MP3/WMA file This unit play can Audio CDs The program function enables you to store your favorite tracks from any disc in the player memory. MP3/WMA files or A program contain 30 tracks. can recorded media. 1. MP3/ WMA/ Audio CD Once you insert an MP3/WMA files recorded media or Audio CD, a menu appears on the TV screen. Press v / V to select ENTER/OK and playback a Insert Audio CD an track/file then press PLAY or starts.
V V iewing Using Zoom JPEG JPEG file a Use this DVD+VCR you can to zoom the enlarge view discs with JPEG photo image. (see Note: files. When the resolution is set to 1. Insert a menu appears disc and close the on 29) page the TV tray. The PHOTO 720p 1080i, or this function is not available. screen. To rotate picture Press v / V picture during showing clockwise or a to rotate the picture counter clockwise. To listen to MP3 music while watching picture 1. 2.
Playing this Using 1. DivX Movie file a DVD+VCR, you Insert a menu appears can play DivX file. DivX disc compatibility limited follows: the TV with this is player ? Available resolution size of the DivX file is under ? The file DivX file recorded media. The MOVIE on as 720x576 screen. (W x name H) pixel. of the DivX subtitle is available by 56 characters. ? If there is impossible code to express in the DivX as mark on the dis- file, it may be displayed " " _ play.
Playing a Maintenance and Service Service DVD VR VR format Disc Refer to the information in this This unit will play DVD-R/RW discs recorded using finalized using the DVD-Video format that have been a ? DVD-recorder. 1. DVD-RW discs recorded play Recording (VR) Insert a menu appears disc and close the on using format. the TV When screen save Do not ENTER and playback or starts. Press DISC MENU to move to the list menu. ? DVD RECORDER.
Reference our TV Controlling Controlling YYour Supplied Remote You can control the sound with with the If You POWER level, input source, and remote. supplied on or off. INPUT Switch the TV's CH +/-- Scans up or down through memorized channels. VOL +/-- Adjust input source. the volume of the TV. Note: Depending the unit on be able to control Controlling being connected, you your TV using some of the than one one at a can may not buttons. 1. source, and well.
Codes Language Codes List Use this list to Disc Audio, input your desired language for the Disc Subtitle, Disc Menu.
T roubleshooting Check the following guide for the possible cause of a before problem service. contacting Cause Symptom Correction The power cord is disconnected. No power. Plug the power securely. cord into the wall out- let Abnormal or no picture The TV is not set to receive DVD+VCR Insert signal output. disc disc or tape. (Check that the tape indicator in the display a or window is lit.) The video cable is not connected Select the appropriate securely.
Cause Symptom Correction The DVD+VCR does No disc is inserted. Insert not start No disc playback. tape is inserted. disc or tape. (Check that the tape indicator in the display a or window is An unplayable Insert disc is inserted. lit.) disc. playable a (Check the disc type and Regional code.) The disc is placed upside Place the disc with the down. playback side down. The disc is not placed Place the disc within the inside the guide. dirty. The level is set.
Specifications General Power 120V, Power 18W requirements consumption Dimensions (approx.) Weight (approx.) Operating temperature Operating humidity Signal system 60 Hz 16.9" X 3.1" X 10.4" (430 X 78.5 X 265 mm) (w x h x d) 9.26 lbs 5˚C to (4.2 kg) 40˚C (41˚F 104˚F) to 5%to90% NTSC Inputs ANTENNA IN VHS VIDEO 75 ohms 1 V IN(LINE1, 2) IN(LINE1, 2) VHS AUDIO (VHF/UHF/CATV) 75 ohms, sync negative, (p-p) -6.
The manufacturer will repair or replace your product, at the manufacturer's option, if it proves to be defective in material or workmanship under normal use, during the warranty period ("Warranty Period") listed below, effective from the date ("Date of Installation") of original consumer purchase of the product. This warranty is good only to the original purchaser of the product and effective only when used in the United States, excluding U.S. Territories.
