Owner's Manual

Preparation

Before Operation-DVD part

LANGUAGE

Menu Language

Select a language for the VCR and DVD’s setup menu

and information display.

Disc Audio / Subtitle / Menu

Select the language you prefer for the audio track

(disc audio), subtitles, and the disc menu.

Original: Refers to the original language in which the

disc was recorded.

Other:To select another language, press number

buttons then ENTER/OK to enter the corresponding

4-digit number according to the language code list in

the reference chapter (see page 34). If you enter the

wrong language code, press CLEAR.

DISPLAY

TV Aspect

4:3 :

Select when a standard 4:3 TV is connected.

16:9 : Select when a 16:9 wide TV is connected.

Display Mode

Display Mode setting works only when the TV Aspect

mode is set to “4:3”.

Letterbox: Displays a wide picture with bands on the

upper and lower portions of the screen.

Panscan:

Automatically displays the wide picture on the

entire screen and cuts off the portions that do not fit.

Progressive Scan

Progressive Scan Video provides the highest quality pic-

tures with less flickering.

If you are using the Component Video jacks for connec-

tion to a TV or a monitor that is compatible with a pro-

gressive scan signal, set Progressive Scan to On.

To Turn ON progressive scan:

Connect component video out of the this unit to the

input of your monitor/television, set your television or

monitor to Component Input.

1. Select “Progressive Scan” on the DISPLAY menu

then press B.

2. Select “On” using the v / V buttons.

3. Pressing ENTER (OK) will set the player to

Progressive scan mode.

DVD