Owner's Manual

10
Preparation
2
Preparation
Codec Unit Overview
a
b c d e f g h i j k l m n o
a
Power indicator: Lights when the unit turns on.
b
If you use the codec unit as stand type, attach the codec unit to the codec unit stand. For more details, refer to 22 page.
c
Power input jack: Connects to a DC 12 V power supply using proper cables.
d
Power button: Turns the unit on or off. You must turn the unit on using the Power button after connecting the power cable. You can
use this button to reset the system.
e
Camera connection port: Connects the HD camera.
f
HDMI Input port: Connects the codec unit and the camera with a HDMI cable.
g
RGB(PC) IN port: Connects the PC with a D-sub cable for presentation.
h
Cooling fan.
i
HDMI OUT 1 port: Connects the codec unit and the display device with a HDMI cable for main output.
j
HDMI OUT 2 port: Connects the codec unit and the display device with a HDMI cable for contents output.
k
LAN port: Connects to a network via a hub with RJ-45 connector.
l
AUDIO IN/OUT: Connects to the external audio device.
m
Microphone jack 1: Connects a microphone.
n
Microphone jack 2: Connects a microphone.
o
LOCK: Connects the Kensington security system cable between the Codec Unit and a large object such as a desk.